component

HX811T

Public Made by Adom

by adom

HX hengjiaxing Supervisor and Reset ICs, SOT-143. Datasheet-verified pinout, KiCad symbol/footprint/3D.

componentpmichx811t
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

PCB Footprint

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

Datasheet

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Download PDF
Contents

README

markdown

HX811T

HX hengjiaxing · Supervisor and Reset ICs · SOT-143

HX811T from HX hengjiaxing, in a SOT-143. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground / negative supply reference (0 V).
2 RESET output Active-low reset output (open-drive push-pull). Pulled low when VCC < Vth (3.08 V typ for HX811T) or when MR is low; released high after the Trp delay (85-900 ms, 500 ms typ). VOL ≤ 0.5 V @ ISINK = 3.2 mA; VOH ≥ 0.8·VCC @ ISOURCE = 500 µA.
3 MR input Active-low manual-reset / enable input. Drive low to force RESET low; release high to allow the Trp reset-delay timer to run out and release RESET. VIH ≥ 0.7·VCC, VIL ≤ 0.2·VCC; minimum pulse width tMR = 10 µs; input pull current IMR up to 25 µA.
4 VCC power_in Positive supply input, 1.0 V to 6.0 V operating (6.5 V absolute max). Monitored against the internal Vth threshold (3.08 V ±2.5% for HX811T). Quiescent current ICCH ≈ 1-5 µA when MR = VCC.

Key specifications

Parameter Value
Manufacturer HX hengjiaxing
Package SOT-143
Category PMIC
Pins 4

Ordering variants

Same part, different packaging or reel option.

  • HX811T

CAD (KiCad official)

  • Symbol: HX811T
  • Footprint: Package_TO_SOT_SMD:SOT-143
  • 3D model: SOT-143 (KiCad packages3D, STEP)
  • 3D model files: hx811t-etched.step / hx811t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hx811t.step / hx811t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HX hengjiaxing datasheet (3 pp, sha256 4238571228a83ddb, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF