component
HX7662-S
Public Made by Adomby adom
ZHHXDZ Charge Pumps, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHX7662-S
ZHHXDZ · Charge Pumps · SOP-8
HX7662-S from ZHHXDZ, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TEST | input | Test pin for oscillator frequency control; not connected in normal operation. Connecting to V+ increases oscillator frequency by enabling parasitic capacitance oscillation. |
| 2 | CAP+ | passive | Positive terminal of pump capacitor C1; connect external 10μF electrolytic capacitor with positive terminal to this pin and negative terminal to ground. |
| 3 | GND | power_in | System ground reference and negative supply return; connect positive terminal of reservoir capacitor C2 to this pin; serves as midpoint reference in voltage splitting applications. |
| 4 | VOUT | output | Negative output voltage from -4.5V to -20V; supplies inverted voltage to load; connect negative terminal of reservoir capacitor C2 here. |
| 5 | LV | input | Low voltage mode control input; connect to ground when supply voltage is less than 8V for improved conversion efficiency; leave open for supply voltages 8V and above. |
| 6 | OSC | input | Oscillator frequency control input; connect external capacitor between this pin and V+ to reduce operating frequency for lower load currents; leave open for nominal 10kHz oscillation. |
| 7 | V+ | power_in | Positive supply voltage input; accepts +4.5V to +20V; primary power source for charge pump operation. |
| 8 | CAP- | passive | Pump capacitor or cascade connection point; used for tying to Pin 3 of previous stage in cascaded configurations; internal charge pump network node. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ZHHXDZ |
| Package | SOP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| V+ to GND | V+ | -0.3 | 22 | V | 2 | ||
| Oscillator Input to GND | -0.3 | V | V-<12V (printed); max V++0.3 V | 2 | |||
| Supply Voltage Range-Lo | V+L | 4.5 | V | RL=10kΩ, LV=GND, -55℃<TA<+125℃ | 2 | ||
| Supply Voltage Range-Hi | V+H | 9 | V | RL=10kΩ, LV=Open, -40℃<TA<+85℃ | 2 | ||
| Storage Temperature | -65 | 160 | ℃ | 2 | |||
| Operating Temperature Range (Commercial) | 0 | 70 | ℃ | Commercial grade | 2 | ||
| Operating Temperature Range (Extended) | -40 | 85 | ℃ | Extended grade | 2 | ||
| Operating Temperature Range (Military) | -55 | 125 | ℃ | Military grade | 2 |
CAD (KiCad official)
- Symbol:
HX7662-S - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
hx7662-s-etched.step/hx7662-s-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hx7662-s.step/hx7662-s.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ZHHXDZ datasheet (9 pp, sha256
601a71494a8c3c2b, retrieved 2026-10-28, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).