component
HX723-40B-S
Public Made by Adomby adom
ZHHXDZ Hall Switches, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHX723-40B-S
ZHHXDZ · Hall Switches · SOP-8
HX723-40B-S from ZHHXDZ, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IP+ | passive | Sampled-current positive terminal of the primary conductor; absolute maximum continuous input current is 40 A, with 100 A peak allowed for 3 s. |
| 2 | IP+ | passive | Second sampled-current positive terminal of the primary conductor (datasheet lists it as a separate pin with the same function), with the same 40 A continuous and 100 A peak (3 s) limits. |
| 3 | IP- | passive | Sampled-current negative terminal of the primary conductor; absolute maximum continuous input current is 40 A, with 100 A peak allowed for 3 s. |
| 4 | IP- | passive | Second sampled-current negative terminal of the primary conductor (datasheet lists it as a separate pin with the same function), with the same 40 A continuous and 100 A peak (3 s) limits. |
| 5 | GND | power_in | Ground reference for the sensor and its output signals. |
| 6 | VZCR | output | Zero-current reference output at 0.5·VCC (2.470-2.530 V at VCC = 5 V); source current up to 400 µA and sink current up to 3000 µA. |
| 7 | OUT | output | Analog signal output, 50%·VCC at zero current and linear with sensed current; absolute maximum source current 6 mA and sink current 30 mA. |
| 8 | VCC | power_in | Supply voltage, operating range 4.5 V to 5.5 V (absolute maximum 7 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ZHHXDZ |
| Package | SOP-8 |
| Category | Magnetic Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 4.5 | 5 | 5.5 | V | 3 | |
| Internal reference | VZCR | 2.47 | 2.5 | 2.53 | V | 3 | |
| Static output voltage | VOUTQ | 2.49 | 2.5 | 2.51 | V | IP=0 | 3 |
| Quiescent current | ICC | 20 | 25 | mA | OUT floating | 3 | |
| Reference output sink current | IZCR(SINK) | 3000 | μA | 3 | |||
| Linearity error | LinERR | 0.1 | 0.5 | % | 3 | ||
| Symmetry error | SymERR | 0.5 | 1.5 | % | 3 | ||
| Transmission delay time | tD | 1 | 2 | μs | 3 | ||
| Rise time | tr | 1 | 2.2 | μs | 3 | ||
| Primary conductor resistance | RP | 0.9 | 1.2 | mΩ | IP=2A | 3 | |
| Current range (40B series) | IP | -40 | 40 | A | 4 | ||
| Sensitivity (40B series) | Sens | 48.5 | 50 | 51.5 | mV/A | full current range | 4 |
| Zero-current differential output error (40B series) | VOE | -10 | 10 | mV | 4 | ||
| Total output error (40B series) | ETOT | -3 | 3 | % | 4 | ||
| Output noise (40B series) | VN(RMS) | 8 | mV | 4 | |||
| Zero-current output temperature coefficient (40B series) | ΔVOUT(Q) | 0.21 | mV/℃ | 4 | |||
| Sensitivity temperature coefficient (40B series) | ΔSENS | 0.012 | mV/A/℃ | 4 | |||
| Output capacitive load | CL | 1 | nF | 3 | |||
| Output resistive load | RL | 1.5 | kΩ | 3 | |||
| Common-mode rejection ratio | CMRR | 38 | dB | 3 | |||
| Power-on time | TPOR | 10 | μs | output from 0 to 90% | 3 | ||
| System bandwidth | BW | 250 | kHz | -3dB | 3 | ||
| Reference output source current | IZCR(SOURCE) | 400 | μA | 3 | |||
| Output voltage | VOUT | -0.3 | V | upper limit printed as VCC+0.3 | 2 | ||
| Supply voltage (absolute maximum) | VCC | 7 | V | 2 | |||
| Output source current | IOUT(SOURCE) | 6 | mA | 2 | |||
| Output sink current | IOUT(SINK) | 30 | mA | 2 | |||
| Isolation voltage (general) | VISO | 3500 | VRMS | 2 | |||
| Input peak current | IPEAK | 100 | A | 3 s | 2 | ||
| Input continuous current | ICON | 40 | A | 2 | |||
| Operating ambient temperature (absolute maximum) | TA | -40 | 125 | °C | 2 | ||
| Maximum junction temperature | TJ | 165 | °C | 2 | |||
| Storage ambient temperature | TS | -55 | 150 | °C | 2 | ||
| ESD protection (HBM) | ESD(HBM) | 4000 | V | HBM | 2 | ||
| Input voltage | VIN+,VIN- | -600 | 600 | VPK | 2 | ||
| Input current (DC/AC RMS) | IP | -50 | 50 | A | DC/AC RMS | 2 | |
| Supply voltage (recommended) | VCC | 4.5 | 5.5 | V | 2 | ||
| Ambient temperature (recommended) | TA | -40 | 125 | °C | 2 | ||
| Isolation test voltage (type test) | VISO | 3500 | VRMS | 50/60Hz, 1 min, type test | 2 | ||
| Isolation test voltage (production) | VTEST | 3900 | VRMS | t = 1 s, 100% production | 2 | ||
| Basic insulation working voltage (peak) | VWFSI | 600 | VPK | 2 | |||
| Basic insulation working voltage (RMS) | VWFSI | 424 | VRMS | 2 | |||
| Clearance input to output | clearance | 3.8 | mm | shortest distance, input to output | 2 | ||
| Maximum repetitive peak isolation voltage | VIORM | 600 | VPK | AC voltage (bipolar) | 2 | ||
| Maximum working isolation voltage (AC sine) | VIOWM | 424 | VRMS | AC voltage (sine wave) | 2 | ||
| Maximum working isolation voltage (DC) | VIOWM | 600 | VDC | DC voltage | 2 | ||
| Maximum transient isolation voltage (type test) | VIOTM | 4949 | VPK | type test, t = 60 s | 2 | ||
| Maximum transient isolation voltage (production) | VTEST | 5515 | VPK | t = 1 s, 100% production | 2 | ||
| Maximum surge isolation voltage | VIOSM | 7000 | VPK | type test, 1.2 µs (rise) / 50 µs (width), single pulse | 2 | ||
| Surge current | ISURGE | 7.5 | kA | IEC 61000-4-5, 8 µs (rise) / 20 µs (width) | 2 |
CAD (KiCad official)
- Symbol:
HX723-40B-S - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
hx723-40b-s-etched.step/hx723-40b-s-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hx723-40b-s.step/hx723-40b-s.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ZHHXDZ datasheet (6 pp, sha256
121870d07fa9feba, retrieved 2026-10-19, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).