component
HX6639IUA-D
Public Made by Adomby adom
HUAXIN Linear Hall Sensors, TO-92S. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
HX6639IUA-D
HUAXIN · Linear Hall Sensors · TO-92S
HX6639IUA-D from HUAXIN, in a TO-92S. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Supply input; the supply must be greater than the minimum operating voltage of 2.8 V (operating range 2.8 V to 6.0 V). |
| 2 | GND | power_in | Ground pin that must be strongly connected to the ground of the power supply. |
| 3 | OUTPUT | output | Push-pull analog output that needs no pull-up resistor; it sits at VDD/2 with no applied field, rises above VDD/2 for an S-pole field and falls below VDD/2 for an N-pole field, with updates occurring after Tsw. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HUAXIN |
| Package | TO-92S |
| Category | Magnetic Sensors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | 2.8 | 6 | V | 工作状态 | 5 | |
| Supply current | IDD | 3.3 | 5 | mA | 工作状态，B=0 Gs | 5 | |
| Output current | IO | 1 | 1.5 | mA | A/B/C/D, VDD>3V | 5 | |
| Zero-field output voltage (D) | VNULL | 2.275 | 2.5 | 2.725 | V | D,B=0 Gs | 5 |
| Output high voltage | VOH | 4.9 | 4.99 | V | B> Max Magnetic Gauss | 5 | |
| Output low voltage | VOL | 0.01 | 0.1 | V | B> Min Magnetic Gauss | 5 | |
| Output noise (D) | VON | 140 | mV | Ta=25℃, COut=10nF | 5 | ||
| Power-on time | TP | 150 | uS | 工作状态 | 5 | ||
| Output switch time | TSW | 150 | uS | 工作状态 | 5 | ||
| Output switching frequency | FSW | 3 | kHz | 工作状态 | 5 | ||
| Magnetic field detection range (D) | -185 | 185 | Gs | 5 | |||
| Sensitivity (D) | Sens | 11.7 | 13 | 14.3 | mV/Gs | 5 | |
| Null voltage error | RVON | -1.5 | 1.5 | % | 实际工作电压/5V 工作电压 | 5 | |
| Sensitivity error | RSEN | -1.5 | 1.5 | % | 实际工作电压/5V 工作电压 | 5 | |
| Linearity | LIN | -1.5 | 1.5 | % | 全输出电压范围 | 6 | |
| Sensitivity temperature coefficient | TCSens | -0.1 | 0.1 | %/℃ | Sens@125℃/Sens@25℃ | 6 | |
| Supply voltage (absolute maximum) | VDD | 8 | V | 4 | |||
| Reverse supply voltage | VDD_REV | -0.5 | V | 4 | |||
| Output drive current | IOUTPUT | 20 | mA | 4 | |||
| Output voltage | VOUTPUT | 8 | V | 4 | |||
| Operating temperature range | TA | -40 | 125 | ℃ | 4 | ||
| Storage temperature range | TSTG | -65 | 150 | ℃ | 4 | ||
| Junction temperature | TJ | 150 | ℃ | 4 | |||
| Package power dissipation | PD | 606 | mW | TO-92S package (SOT-23 is 230 mW) | 4 | ||
| ESD HBM rating | ESD | 4000 | V | HBM | 4 |
CAD (KiCad official)
- Symbol:
HX6639IUA-D - Footprint:
Package_TO_SOT_THT:TO-92_Inline - 3D model: TO-92S (KiCad packages3D, STEP)
- 3D model files:
hx6639iua-d-etched.step/hx6639iua-d-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hx6639iua-d.step/hx6639iua-d.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HUAXIN datasheet (13 pp, sha256
b848aed2dc79da33, retrieved 2026-10-19, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HX6639IUA-D
**HUAXIN** · Linear Hall Sensors · TO-92S
HX6639IUA-D from HUAXIN, in a TO-92S. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Supply input; the supply must be greater than the minimum operating voltage of 2.8 V (operating range 2.8 V to 6.0 V). |
| 2 | GND | power_in | Ground pin that must be strongly connected to the ground of the power supply. |
| 3 | OUTPUT | output | Push-pull analog output that needs no pull-up resistor; it sits at VDD/2 with no applied field, rises above VDD/2 for an S-pole field and falls below VDD/2 for an N-pole field, with updates occurring after Tsw. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HUAXIN |
| Package | TO-92S |
| Category | Magnetic Sensors |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | 2.8 | | 6 | V | 工作状态 | 5 |
| Supply current | IDD | | 3.3 | 5 | mA | 工作状态，B=0 Gs | 5 |
| Output current | IO | 1 | 1.5 | | mA | A/B/C/D, VDD>3V | 5 |
| Zero-field output voltage (D) | VNULL | 2.275 | 2.5 | 2.725 | V | D,B=0 Gs | 5 |
| Output high voltage | VOH | | 4.9 | 4.99 | V | B> Max Magnetic Gauss | 5 |
| Output low voltage | VOL | 0.01 | 0.1 | | V | B> Min Magnetic Gauss | 5 |
| Output noise (D) | VON | | | 140 | mV | Ta=25℃, COut=10nF | 5 |
| Power-on time | TP | | | 150 | uS | 工作状态 | 5 |
| Output switch time | TSW | | | 150 | uS | 工作状态 | 5 |
| Output switching frequency | FSW | 3 | | | kHz | 工作状态 | 5 |
| Magnetic field detection range (D) | | -185 | | 185 | Gs | | 5 |
| Sensitivity (D) | Sens | 11.7 | 13 | 14.3 | mV/Gs | | 5 |
| Null voltage error | RVON | -1.5 | | 1.5 | % | 实际工作电压/5V 工作电压 | 5 |
| Sensitivity error | RSEN | -1.5 | | 1.5 | % | 实际工作电压/5V 工作电压 | 5 |
| Linearity | LIN | -1.5 | | 1.5 | % | 全输出电压范围 | 6 |
| Sensitivity temperature coefficient | TCSens | -0.1 | | 0.1 | %/℃ | Sens@125℃/Sens@25℃ | 6 |
| Supply voltage (absolute maximum) | VDD | | | 8 | V | | 4 |
| Reverse supply voltage | VDD_REV | -0.5 | | | V | | 4 |
| Output drive current | IOUTPUT | | | 20 | mA | | 4 |
| Output voltage | VOUTPUT | | | 8 | V | | 4 |
| Operating temperature range | TA | -40 | | 125 | ℃ | | 4 |
| Storage temperature range | TSTG | -65 | | 150 | ℃ | | 4 |
| Junction temperature | TJ | | | 150 | ℃ | | 4 |
| Package power dissipation | PD | | | 606 | mW | TO-92S package (SOT-23 is 230 mW) | 4 |
| ESD HBM rating | ESD | | | 4000 | V | HBM | 4 |
## CAD (KiCad official)
- Symbol: `HX6639IUA-D`
- Footprint: `Package_TO_SOT_THT:TO-92_Inline`
- 3D model: TO-92S (KiCad packages3D, STEP)
- 3D model files: `hx6639iua-d-etched.step` / `hx6639iua-d-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hx6639iua-d.step` / `hx6639iua-d.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HUAXIN datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588888884193607680) (13 pp, sha256 `b848aed2dc79da33`, retrieved 2026-10-19, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hx6639iua-d-datasheet.pdf)