HX6639ISO-D

{
 "schema": "adom.pads/1",
 "slug": "hx6639iso-d",
 "footprint": "SOT-23",
 "generated_from": {
  "footprint": "SOT-23@sha256:0d88c86c1b6d8c1a",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -0.9375,
   -0.95
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "SOT-23@sha256:0d88c86c1b6d8c1a"
 },
 "pad_count": 3,
 "symbol_pins": [
  "1",
  "2",
  "3"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -0.9375,
    -0.95
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "VDD",
   "type": "power_in",
   "description": "Supply input. Operating range 2.8 V to 6.0 V (abs max 8 V, reverse -0.5 V). Typical IDD ~3.3 mA at 5 V, B=0. Bypass with a 1 nF/10 V ceramic near the pin per the application diagram.",
   "is_pin1": true,
   "source": {
    "geometry": "SOT-23.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -0.9375,
    0.95
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "OUTPUT",
   "type": "output",
   "description": "Push-pull analog Hall output, no pull-up required. VOUT = VDD/2 at B = 0 (VNULL). Slope for the D variant is 13.0 mV/Gs (linear over ±185 Gs); VOH ~4.9 V, VOL ~0.01-0.1 V, IO up to 1.5 mA source/sink, TSW ~150 µs. South-pole field near the top drives VOUT above VNULL, north-pole drives it below. Recommended 10 nF/10 V load cap to GND.",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-23.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    0.9375,
    0.0
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "GND",
   "type": "power_in",
   "description": "Device ground. Must connect solidly to the supply return.",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-23.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}