Generated by kicad-footprint-generator · KiCad file format 20260206
HX65HVD11-S
ZHHXDZ · RS-485 / RS-422 ICs · SOP-8
HX65HVD11-S from ZHHXDZ, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver output: RO is high when V(A)-V(B) is at or above -50 mV and low when V(A)-V(B) is at or below -200 mV, and is enabled only when RE is low. |
| 2 | RE | input | Receiver output enable, active low: RO is valid when RE is low, and when RE is high the receiver is turned off. |
| 3 | DE | input | Driver output enable: when DE is high the driver output is enabled, and when DE is low the driver turns off and its output enters a high-resistance state. |
| 4 | DI | input | Driver data input: when DI is high the driver drives A high and B low, and when DI is low it drives A low and B high (with DE high). |
| 5 | GND | power_in | Ground reference for the device. |
| 6 | A | bidirectional | Driver output / receiver input A (non-inverting bus line): connected to the non-inverting bus terminal, with the driver output and receiver input both on this pin. |
| 7 | B | bidirectional | Driver output / receiver input B (inverting bus line): connected to the inverting bus terminal, with the driver output and receiver input both on this pin. |
| 8 | VCC | power_in | Power supply, 3.3 V or 5 V nominal per the features list; absolute maximum VCC is +6.0 V and the DC characteristics are specified at Vcc = +3.3 V ±5%. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ZHHXDZ |
| Package | SOP-8 |
| Category | Interface |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (VCC) absolute maximum | VCC | 6 | V | 2 | |||
| Control input voltage (DE, RE) | DE,RE | -0.3 | 6 | V | 2 | ||
| Driver input voltage (DI) | DI | -0.3 | 6 | V | 2 | ||
| Bus voltage (A, B) | A,B | -8 | 13 | V | 2 | ||
| Storage temperature range | TSTG | -65 | 150 | ℃ | 2 | ||
| Operating temperature range | TOP | -40 | 125 | ℃ | 2 | ||
| Soldering temperature | 300 | ℃ | 10 seconds | 2 | |||
| Power dissipation | P | 471 | mW | SOP-8, derate above 70 ℃ | 2 | ||
| Receiver logic input high voltage | VIH1 | 2 | V | DE,DI,RE | 2 | ||
| Receiver logic input low voltage | VIL1 | 0.8 | V | DE,DI,RE | 2 | ||
| Receiver output low voltage | VOL | 0.4 | V | IO=4mA, VID=-1V | 2 | ||
| Receiver output short-circuit current | IOSR | -7 | 7 | mA | 0V≤VRO≤VCC | 2 | |
| Receiver input impedance | RIN | 96 | KΩ | -7V≤VCM≤+12V | 2 | ||
| Input current (DE, DI, RE) | IIN1 | -2 | 2 | uA | VCC=GND or 5.25V | 2 | |
| Input current (A and B) | IIN4 | 125 | uA | DE=GND, VIN=12V | 2 | ||
| Power supply current | ICC | 450 | uA | No load, RE=DI=GND or Vcc, DE=GND | 2 | ||
| Power supply current (driver enabled) | ICC | 600 | uA | DE=VCC | 2 | ||
| Shutdown supply current | 10 | uA | DE=GND, RE=Vcc | 2 |
CAD (KiCad official)
- Symbol:
HX65HVD11-S - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
hx65hvd11-s-etched.step/hx65hvd11-s-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hx65hvd11-s.step/hx65hvd11-s.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ZHHXDZ datasheet (5 pp, sha256
6b446184b3477d30, retrieved 2026-11-05, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).