Generated by kicad-footprint-generator · KiCad file format 20260206
HX6300MR-G
HX(hengjiaxing) · Power Distribution Switches · SOT-23-6L
HX6300MR-G from HX(hengjiaxing), in a SOT-23-6L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FB | input | Connects to the external resistor divider that sets the overvoltage lockout threshold per VOVLO = 1.25 x (1 + R1/R2), and leaving it floating or grounding it selects the internal 6.1 V default; the FB pin is rated to 6 V absolute maximum. |
| 2 | EN | input | Chip enable input, active high, with a high threshold of at least 1.0 V and a low threshold of at most 0.4 V, and an absolute maximum rating of 36 V. |
| 3 | OUT | power_out | Output of the internal high-side N-MOSFET, rated for 3.0 A continuous and 6.0 A peak for 10 ms, with an absolute maximum voltage of 36 V. |
| 4 | IN | power_in | Chip power input with an operating range of 4.0 V to 36 V and an absolute maximum rating of 36 V. |
| 5 | VCC | power_in | Supply input for the internal circuitry, with an absolute maximum rating of 36 V. |
| 6 | VSS | power_in | Ground reference pin for the device. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HX(hengjiaxing) |
| Package | SOT-23-6L |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 输入电压 IN | VIN | -0.3 | 36 | V | 3 | ||
| 输入电压 VCC | VVCC | -0.3 | 36 | V | 3 | ||
| 使能控制脚耐压 | VEN | -0.3 | 36 | V | 3 | ||
| 输出脚耐压 | VOUT | -0.3 | 36 | V | 3 | ||
| FB 脚耐压 | VFB | -0.3 | 6 | V | 3 | ||
| 输入-输出的最大持续电流 | ISW1 | 3 | A | 3 | |||
| 输入-输出的最大峰值电流(10ms) | ISW2 | 6 | A | 10ms | 3 | ||
| 功率损耗 (SOT23-6L) | PD | 0.45 | W | SOT23-6L, TA=+25℃ | 3 | ||
| 储存温度和结温 | Tstg,TJ | -65 | 150 | ℃ | 3 | ||
| 工作温度 | TA | -40 | 85 | ℃ | 3 | ||
| 热阻(SOT23-6L) | θJA | 250 | ℃/W | 3 | |||
| 人体模型静电放电保护 | 2000 | V | 3 | ||||
| 输入电压 | VIN | 4 | 36 | V | 3 | ||
| 静态电流 | IQ | 80 | 150 | 240 | μA | VEN=高, 输出悬空 | 3 |
| 高使能阈值电压 | VEN-H | 1 | V | VEN 上升 | 3 | ||
| 低使能阈值电压 | VEN-L | 0.4 | V | VEN 下降 | 3 | ||
| 过压锁定阈值 | VOVLO | 5.9 | 6.1 | 6.3 | V | VIN 上升,FB悬空或接地 | 3 |
| OVP FB 阈值电压 | VFB | 1.2 | 1.25 | 1.3 | V | 3 | |
| 关断电流 | ISD | 13 | 25 | μA | VEN=低, 输出悬空 | 3 | |
| 导通电阻 | RON | 35 | mΩ | VIN=5.0V, IOUT=1A | 3 | ||
| 输出放电电阻 | RDISCHARGE | 2.7 | KΩ | VIN=5.0V | 3 | ||
| 过压锁定迟滞 | VOVLO-HYS | 150 | mV | VIN 下降 | 3 | ||
| 欠压锁定阈值 | VUVLO | 3.25 | V | VIN 上升 | 3 | ||
| 欠压锁定迟滞 | VUVLO-HYS | 150 | mV | VIN 下降 | 3 | ||
| 上电去抖动延时 | tDEB | 12 | ms | 时间范围从3.35V<VIN< VOVLO 到 VOUT=10% of VIN | 3 | ||
| 开关软启动时间 | tON | 120 | μs | RL=10Ω, CL=22μF, 输出从0.1×VIN 到0.9×VIN | 3 | ||
| 输出上电时间 | tON_ALL | 12.12 | ms | 时间范围从3.35V<VIN< VOVLO 到 VOUT=90% of VIN | 3 | ||
| 开关关断响应时间 | tOFF_RES | 50 | ns | VIN > VOVLO 到输出停止上升 | 4 | ||
| 热关断 | VOTP | 145 | ℃ | 4 | |||
| 热关断迟滞 | VOTP-HYS | 40 | ℃ | 4 |
CAD (KiCad official)
- Symbol:
HX6300MR-G - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6L (KiCad packages3D, STEP)
- 3D model files:
hx6300mr-g-etched.step/hx6300mr-g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hx6300mr-g.step/hx6300mr-g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HX(hengjiaxing) datasheet (7 pp, sha256
ea4f5aab64bc2fef, retrieved 2026-11-07, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).