main
History Download
Ray Publish 0.1.0 c15b8fb

HX6251-S

ZHHXDZ · CAN Transceivers · SOP-8

HX6251-S from ZHHXDZ, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 TXD input Transmit data input from the CAN controller; a low level drives the bus dominant, and the transmitter is disabled if the low persists longer than tdom (300 to 700 μs).
2 GND power_in Ground supply pin for the transceiver.
3 VCC power_in Supply voltage of 5 V ±10% (absolute range 4.75 V to 5.25 V).
4 RXD output Receive data output that reads out data from the bus lines to the CAN controller, high when the bus is recessive.
5 SPLIT output Common-mode stabilization output, stabilised at 0.3VCC to 0.7VCC for ±500 μA load current.
6 CANL bidirectional LOW-level CAN bus line, bus-side voltage limited to -60 V to +60 V.
7 CANH bidirectional HIGH-level CAN bus line, bus-side voltage limited to -60 V to +60 V.
8 STB input Selects high-speed mode when grounded (low) and standby mode when high or left unconnected.

Key specifications

Parameter Value
Manufacturer ZHHXDZ
Package SOP-8
Category Communication Interface Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage range VCC 4.75 5.25 V 2
TXD, RXD, STB MCU side port voltage -0.3 V 2
CANL, CANH, SPLIT bus-side port voltage -60 60 V 2
Transient voltage pin 6, 7 Vtr -200 200 V Pin 6, 7 2
Storage temperature -55 150 ℃ 2
Ambient temperature -40 85 ℃ 2
Welding temperature range 300 ℃ 2
SOP8 continuous power consumption 400 mW 2
CANH output voltage (dominant) VOH(D) 2.9 3.4 4.5 V VI=0V,STB=0V,RL=60Ω,F1、2 2
CANL output voltage (dominant) VOL(D) 0.8 1.5 V 2
Bus output differential voltage (implicit) VO(R) 2 2.5 3 V VI=3V,STB=0V,RL=60Ω,F1、2 2
Bus output differential voltage (dominant) VOD(D) 1.5 3 V VI=0V,STB=0V,RL=60Ω,F1、2 2
Bus output differential voltage (implicit) VOD(R) -0.012 0.012 V VI=3V, S=0V, F1、2 2
Bus output differential voltage (implicit), no load VOD(R) -0.5 0.05 V VI=3V,STB=0V,NO LOAD 2
Dominant output voltage symmetry Vdom(TX)sym -400 400 mV Vdom(TX)sym=VCC-VCANH-VCANL 2
Common mode output voltage VOC 2 2.5 3 V STB=0V,F8 2
Explicit and implicit common mode output voltage difference ΔVOC 30 mV 2
Short-circuit output current IOS -105 -72 mA CANH=-12V,CANL=open,F11 2
Short-circuit output current IOS 0.36 1 mA CANH=12V,CANL=open,F11 2
Short-circuit output current IOS -1 0.5 mA CANL=-12V,CANH=open,F11 2
Short-circuit output current IOS 71 105 mA CANL=12V,CANH=open,F11 2
Hidden output current IO(R) -2 2.5 mA -27V<CANH<32V 0<VCC<5.25V 2
Transmission delay (low to high) tPLH 25 65 120 ns STB=0V,F4 2
Transmission delay (high to low) tPHL 25 45 90 ns 2
Differential output rise delay time tr 25 ns 2
Differential output fall delay time tf 50 ns 2
Enable time from listen mode to dominant tEN 10 μs F7 2
Explicit timeout tdom 300 450 700 μs F10 2
Bus wake-up time tBUS 0.7 5 μs 2
Positive input threshold VIT+ 800 900 mV S=0V,F5 3
Negative input threshold VIT- 500 650 mV 3
Comparator threshold hysteresis interval VHYS 100 125 mV 3
High level output voltage VOH 4 4.6 V IO=-2mA,F6 3
Low level output voltage VOL 0.2 0.4 V IO=2Ma,F6 3
Bus input current at power down I(OFF) 5 μA CANH or CANL=5V,Other pin=0V 3
CANH, CANL input capacitance to ground CI 13 pF 3
CANH, CANL differential input capacitors CID 5 pF 3
CANH, CANL input resistance RIN 15 30 40 kΩ TXD=3V,STB=0V 3
CANH, CANL differential input resistors RID 30 80 kΩ 3
RI(CANH), RIN(CANL) mismatches RImatch -3 3 % CANH=CANL 3
Common mode voltage range VCOM -12 12 V 3
Propagation delay (low to high) tPLH 60 100 130 ns STB=0V or VCC F6 3
Propagation delay (high to low) tPHL 45 70 90 ns 3
RXD signal rise time tr 8 ns 3
RXD signal fall time tf 8 ns 3
Loop delay 1, driver input to receiver output, implicit to explicit Td(LOOP1) 90 190 ns STB=0V,F9 3
Loop delay 2, driver input to receiver output, explicit to implicit Td(LOOP2) 90 190 ns 3
Over temperature shutdown Tj(sd) 155 165 180 ℃ 3
Leakage current IO(stb) -5 5 μA STB=2V,-12V<VO<12V 3
TXD port high level input current IIH(TXD) -2 2 μA VI=VCC 3
TXD port low level input current IIL(TXD) -50 -10 μA VI=0 3
Current in TXD when VCC=0V IO(off) 1 μA VCC=0V,TXD=5V 3
Input high lower limit VIH 2 V 3
Input low limit VIL -0.3 0.8 V 3
Silent mode power consumption ICC 5 12 μA STB=VCC,VI=VCC 3
Dominant power consumption ICC 50 70 mA VI=0V,S=0V LOAD=60Ω 3
Implicit power consumption ICC 6 10 mA VI=VCC,S=0V NO LOAD 3

CAD (KiCad official)

  • Symbol: HX6251-S
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: hx6251-s-etched.step / hx6251-s-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hx6251-s.step / hx6251-s.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: ZHHXDZ datasheet (8 pp, sha256 8a7d42dbf9af5acd, retrieved 2026-10-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus off (skipped (clean text read)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF