Generated by kicad-footprint-generator · KiCad file format 20260206
HX487-S
ZHHXDZ · RS-485 / RS-422 ICs · SOP-8
HX487-S from ZHHXDZ, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver data output; RO is high when DE-A-B is -50 mV or more, low when it is -200 mV or less, and high for open or shorted inputs. |
| 2 | RE | input | Receiver output enable, active low; per the receiver truth table, RE high with DE high puts RO in high impedance. |
| 3 | DE | input | Driver output enable, active high; when DE is low the driver outputs A and B are high impedance, and when DE is high the chip operates in transmit mode. |
| 4 | DI | input | Driver data input; DI drives the bus outputs A and B when the driver is enabled (DE high). |
| 5 | GND | power_in | Ground reference for all voltages on the device. |
| 6 | A | bidirectional | Driver differential output and receiver differential input (A side); ESD protection is ±15 kV HBM on A/B. |
| 7 | B | bidirectional | Driver differential output and receiver differential input (B side); ESD protection is ±15 kV HBM on A/B. |
| 8 | Vcc | power_in | Power supply; the operating voltage range is 4.5 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ZHHXDZ |
| Package | SOP-8 |
| Category | Interface |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 6 | V | 2 | |||
| DE, RE control input voltage | -0.5 | 6 | V | 2 | |||
| DI driver input voltage | -0.5 | 6 | V | 2 | |||
| A,B driver output / receiver input voltage | -7 | 12 | V | 2 | |||
| RO receiver output voltage | -0.3 | V | max VCC+0.3 | 2 | |||
| Storage temperature range | TSTG | -55 | 150 | ℃ | 2 | ||
| Operating temperature range | TOP | -40 | 85 | ℃ | 2 | ||
| Maximum operating temperature range | TMOP | -55 | 125 | ℃ | 2 | ||
| Power dissipation SOP-8 | PD | 470 | mW | SOP-8, above +70℃ | 2 | ||
| Soldering temperature | TL | 300 | ℃ | 10 s | 2 | ||
| Operating voltage range | Vcc | 4.5 | 5.5 | V | 2 | ||
| Driver differential output (no load) | VOD1 | 5 | V | 2 | |||
| Driver differential output (loaded) | VOD2 | 1.5 | V | R=54Ω or R=27Ω, Fig. 1 | 2 | ||
| Driver differential output voltage change in magnitude | ΔVOD | 0.2 | V | 2 | |||
| Driver common-mode output voltage | VOC | 1 | 3 | V | 2 | ||
| Driver common-mode output voltage change in magnitude | ΔVOC | 0.2 | V | 2 | |||
| Input high voltage | VIH | 2 | V | DE, RE, DI | 2 | ||
| Input low voltage | VIL | 0.8 | V | DE, RE, DI | 2 | ||
| Input current | IIN1 | -2 | 2 | uA | DE, RE, DI | 2 | |
| Input current (A,B) | IIN2 | 40 | 90 | uA | DE=0V, Vcc=5V, VIN=5V | 2 | |
| Input current (A,B) | IIN2 | 60 | 100 | uA | DE=0V, Vcc=5V, VIN=0V | 2 | |
| Receiver differential input threshold voltage | VTH | -200 | -50 | mV | -7V ≤ VCM ≤ +12V | 2 | |
| Receiver input hysteresis | ΔVTH | 25 | mV | 2 | |||
| Receiver output high voltage | VOH | 4 | V | IO=-8mA | 2 | ||
| Receiver output low voltage | VOL | 0.4 | V | IO=8mA | 2 | ||
| Receiver three-state (high-Z) output current | IOZR | 1 | uA | 0.4V ≤ Vo ≤ 2.4V | 2 | ||
| Receiver input impedance | RIN | 96 | kΩ | -7V ≤ VCM ≤ +12V | 2 | ||
| No-load supply current | ICC | 480 | 600 | uA | No load, RE=DI=GND or Vcc, DE=Vcc | 2 | |
| No-load supply current | ICC | 450 | 600 | uA | No load, RE=DI=GND or Vcc, DE=GND | 2 | |
| Receiver output short-circuit current | IOSR | 95 | mA | 0V ≤ VRO ≤ VCC | 2 | ||
| ESD protection, A/B, human body model | -8 | 8 | kV | Between A and B, human body model | 2 | ||
| Driver input to output (rising) | tDPLH | 250 | 1000 | nS | RDIFF=50Ω, CL1=CL2=100pF, Fig. 3, 5 | 2 | |
| Driver input to output (falling) | tDPHL | 250 | 1000 | nS | RDIFF=50Ω, CL1=CL2=100pF, Fig. 3, 5 | 2 | |
| Driver output skew | tDSKEW | -100 | 100 | nS | /tDPLH - tDPHL/ | 2 | |
| Driver rise time | tDR | 200 | 750 | nS | 2 | ||
| Driver fall time | tDF | 200 | 752 | nS | 2 | ||
| Driver enable to output high | tDZH | 2500 | nS | CL 00pF, Fig. 4, 6, S2 closed | 2 | ||
| Driver enable to output low | tDZL | 2500 | nS | CL=100pF, Fig. 4, 6, S1 closed | 2 | ||
| Driver low to disable | tDLZ | 100 | nS | CL=15pF, Fig. 4, 6, S1 closed | 2 | ||
| Driver high to disable | tDHZ | 100 | nS | CL=15pF, Fig. 4, 6, S2 closed | 2 | ||
| Receiver input to output (rising) | tRPLH | 200 | nS | /VID/ ≥ 2.0V; VID rise/fall time ≤ 15nS, Fig. 7, 9 | 2 | ||
| Receiver input to output (falling) | tRPHL | 200 | nS | /VID/ ≥ 2.0V; VID rise/fall time ≤ 15nS, Fig. 7, 9 | 2 | ||
| Receiver differential output skew | tRSKEW | -30 | 30 | nS | /tRPLH - tRPHL/ | 2 | |
| Receiver enable to output low | tRZL | 20 | 50 | nS | CL=100pF, Fig. 2, 8, S1 closed | 2 | |
| Receiver enable to output high | tRZH | 20 | 50 | nS | CL=100pF, Fig. 2, 8, S2 closed | 2 | |
| Receiver low to disable | tRLZ | 20 | 50 | nS | CL=100pF, Fig. 2, 8, S1 closed | 2 | |
| Receiver high to disable | tRHZ | 20 | 50 | nS | CL=100pF, Fig. 2, 8, S2 closed | 2 | |
| Driver output short-circuit current | IOD | 100 | mA | Short circuit between A and B | 2 | ||
| Maximum data rate | fMAX | 250 | 500 | Mbps | 3 |
CAD (KiCad official)
- Symbol:
HX487-S - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
hx487-s-etched.step/hx487-s-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hx487-s.step/hx487-s.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ZHHXDZ datasheet (4 pp, sha256
27d557b8ba81ffce, retrieved 2026-10-28, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).