component

HX481-S

Public Made by Adom

by adom

ZHHXDZ RS-485 / RS-422 ICs, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentinterfacehx481-sfactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Datasheet

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

HX481-S

ZHHXDZ · RS-485 / RS-422 ICs · SOP-8

HX481-S from ZHHXDZ, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RO output Receiver data output; per the receiver truth table RO is high when A-B is at or above -50 mV and low when A-B is at or below -200 mV, and goes high-impedance when RE is high and DE is low.
2 RE input Receiver enable; the receiver is active when RE is low, and RO is high-impedance when RE is high with DE low.
3 DE input Driver enable; when DE is high the chip is in the transmit state and A/B are driven by DI, and when DE is low the driver outputs are high-impedance (Z).
4 DI input Driver data input; when DE is high, a high DI drives A high and B low, and a low DI drives A low and B high.
5 GND power_in Ground.
6 A bidirectional Driver data output and receiver data input (non-inverting bus line); A/B ESD protection is rated ±15 kV human body model.
7 B bidirectional Driver data output and receiver data input (inverting bus line); A/B ESD protection is rated ±15 kV human body model.
8 Vcc power_in Power supply; working voltage range is 4.5 V to 5.5 V (absolute maximum +6.0 V).

Key specifications

Parameter Value
Manufacturer ZHHXDZ
Package SOP-8
Category Interface
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC -0.5 6 V 2
Drive output voltage / receive input voltage (A, B) A,B -7 12 V 2
Control input voltage (DE, RE) DE,RE 6 V 2
Drive input voltage (DI) DI 6 V 2
Power dissipation (SOP-8) PD 470 mW 2
Solder temperature TL 300 ℃ 10 seconds 2
Storage temperature range TSTG -55 150 ℃ 2
Operating temperature range TOP -40 85 ℃ 2
Maximum operating temperature range TMOP -55 125 ℃ 2
Working voltage range Vcc 4.5 5.5 V 2
Driver differential output (with load) VOD2 1.5 V R=54Ω or R=27Ω Figure 1 2
Change in magnitude of driver differential output when DI changes ΔVOD 0.2 V 2
Driver common mode output voltage VOC 1 3 V 2
Change in common mode output voltage when DI changes ΔVOC 0.2 V 2
Input high voltage VIH 2 V 2
Input low voltage VIL 0.8 V 2
Input current (DE, RE, DI) IIN1 -2 2 uA 2
Input current (A, B) IIN2 40 90 uA DE=0V, Vcc=5V 2
Input current (A, B) IIN2 60 100 uA VIN=0V 2
Receiver differential input threshold voltage VTH -200 -50 -50 mV -7V ≤VCM≤+12V 2
Receiver differential input threshold change ΔVTH 25 mV 2
Receiver output high level VOH 4 V IO=-8mA 2
Receiver output low level VOL 0.4 V IO=8mA 2
Receiver output tri-state leakage current IOZR 1 uA 0.4V ≤Vo≤2.4V 2
Receiver input impedance RIN 96 kΩ -7V ≤VCM≤+12 2
No load operating current ICC 480 600 uA DE = Vcc 2
No load operating current ICC 450 600 uA DE=GND, RE=DI=GND or Vcc 2
Receiver output short-circuit current IOSR 95 mA 0V ≤VRO≤ 2
ESD protection, human body model ESD -15 15 kV Between A/B, human body mode 2
Driver input to output (tDPLH) tDPLH 60 nS RDIFF=50Ω, CL1=CL2=100pF, Figure 3,5 2
Driver input to output (tDPHL) tDPHL 60 nS RDIFF=50Ω, CL1=CL2=100pF, Figure 3,5 2
Driver output offset tDPLH - tDPHL tDPLH, tDPHL -2.5 nS RDIFF=50Ω, CL1=CL2=100pF, Figure 3,5 2
Driver differential output skew tDSKEW -10 10 nS RDIFF=50Ω, CL1=CL2=100pF, Figure 3,5 2
Drive rise time tDR 25 nS RDIFF=50Ω, CL1=CL2=100pF, Figure 3,5 2
Drive fall time tDF 25 nS RDIFF=50Ω, CL1=CL2=100pF, Figure 3,5 2
Driver enables high output (drive from high to off / enable) tDZH 150 nS CL=100pF, Figure 4,6, S2 closed 2
Driver enables output to be low tDZL 150 nS CL=100pF, Figure 4,6, S1 closed 2
Driver from low to off tDLZ 100 nS CL=15pF, Figure 4,6, S1 closed 2
Driver from high to off tDHZ 100 nS CL=15pF, Figure 4,6, S2 closed 2
Receiver input to output (low to high) tRPLH 150 nS /VID/ ≥2.0V; VID rising and falling time ≤15nS, Figure 7,9 2
Receiver input to output (high to low) tRPHL 150 nS /VID/ ≥2.0V; VID rising and falling time ≤15nS, Figure 7,9 2
Differential receiver offset (receiver skew) tRSKEW -10 10 nS 2
Receiver enable to output low tRZL 50 nS CL=100pF, Figure 2,8 2
Receiver enable to output high tRZH 50 nS CL=100pF, Figure 2,8 2
Receiver from low to off tRLZ 50 nS CL=100pF, Figure 2,8 2
Receiver from high to off tRHZ 50 nS CL=100pF, Figure 2,8 2
Maximum data speed fMAX 10 Mbps 3

CAD (KiCad official)

  • Symbol: HX481-S
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: hx481-s-etched.step / hx481-s-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hx481-s.step / hx481-s.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: ZHHXDZ datasheet (4 pp, sha256 3651088d317c62cf, retrieved 2026-10-18, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF