component
HX4424-S
Public Made by Adomby adom
ZHHXDZ Gate Drivers, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 8d ago |
| viewers | 8d ago |
| hx4424-s-etched.glb | 8d ago |
| hx4424-s-etched.step | 8d ago |
| hx4424-s-hero.glb | 8d ago |
| hx4424-s-hero.overlay.json | 8d ago |
| hx4424-s.glb | 8d ago |
| hx4424-s.kicad_mod | 8d ago |
| hx4424-s.kicad_sym | 8d ago |
| hx4424-s.lbr | 8d ago |
| hx4424-s.step | 8d ago |
| package.json | 8d ago |
| page.json | 8d ago |
| README.md | 8d ago |
HX4424-S
ZHHXDZ · Gate Drivers · SOP-8
HX4424-S from ZHHXDZ, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connection; the pin table lists it as NC with no function assigned. |
| 2 | IN A | input | Input A is a high-impedance, TTL/CMOS compatible MOSFET driver input with 300 mV hysteresis between its high and low thresholds, which prevents output glitching even on very slow input edges, and OUT A is the inverse of this input. |
| 3 | GND | power_in | Ground is the device return pin and should have a low-impedance connection to the bias supply return, since high peak current flows out of this pin when the capacitive load discharges; the device withstands noise spikes of up to 5 V on the ground pin regardless of polarity. |
| 4 | IN B | input | Input B is a high-impedance, TTL/CMOS compatible MOSFET driver input with 300 mV hysteresis between its high and low thresholds, which prevents output glitching even on very slow input edges, and OUT B is the inverse of this input. |
| 5 | OUT B | output | Output B is a low-impedance CMOS push-pull output whose pull-up and pull-down devices are of equal strength, and it is held LOW if Input B is unbiased or floating. |
| 6 | VDD | power_in | VDD is the bias supply for the driver, rated 4.5 V to 25 V with respect to GND, and should be bypassed with local ceramic capacitors (1.0 µF suggested, sized to the capacitive load). |
| 7 | OUT A | output | Output A is a low-impedance CMOS push-pull output whose pull-up and pull-down devices are of equal strength, and it is held LOW if Input A is unbiased or floating. |
| 8 | NC | unconnected | No connection; the pin table lists it as NC with no function assigned. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ZHHXDZ |
| Package | SOP-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | VDD | 4.5 | 25 | V | 3 | ||
| Under-Voltage Lockout ON Threshold | 3.7 | 4.1 | V | 3 | |||
| Input Current | IIN | -1 | 1 | µA | 0V ≤ VIN ≤ VDD | 3 | |
| DC Supply Voltage (recommended) | 4.5 | 25 | V | 3 | |||
| Operating ambient temperature | -40 | 125 | °C | 3 | |||
| DC supply voltage Vs | Vs | 26 | V | 3 | |||
| Operating junction temperature | -40 | 125 | °C | 3 | |||
| Storage temperature | -55 | 150 | °C | 3 | |||
| Maximum input voltage | -5 | V | Printed as GND-5 (min); upper limit printed as VDD+0.3, not a numeric value | 3 | |||
| Input Signal High Threshold | VIH | 1.6 | V | 3 | |||
| Input Signal Low Threshold | VIL | 0.7 | V | 3 | |||
| Input Signal Hysteresis | VHYS | 0.3 | V | 3 | |||
| Low Output Voltage | VOL | 0.025 | V | DC Test | 3 | ||
| Pull-Up Resistance | ROH | 1.6 | Ω | Source Current = 10mA | 3 | ||
| Pull-Down Resistance | ROL | 1.5 | Ω | Sink Current = -10mA | 3 | ||
| Peak Output Current | IPK | 4 | A | 10V ≤ VDD ≤ 18V | 3 | ||
| Power Supply Current | ICC | 0.9 | mA | VINA=VINB=3V | 3 | ||
| Power Supply Current | ICC | 0.5 | mA | VINA=VINB=0V | 3 | ||
| Under-Voltage Lockout Hysteresis | 0.5 | V | 3 | ||||
| Rise Time | tR | 12 | ns | CL =1800pF, See Figure 3 | 3 | ||
| Fall Time | tF | 12 | ns | CL =1800pF, See Figure 3 | 3 | ||
| Turn-On Delay Time | tD1 | 36 | ns | Non-inverting Input | 3 | ||
| Turn-On Delay Time | tD1 | 35 | ns | Inverting Input | 3 | ||
| Thermal Shutdown Threshold | 150 | °C | 3 | ||||
| Thermal Shutdown Threshold Hysteresis | 25 | °C | 3 | ||||
| Package Thermal Resistance | 155 | °C/W | SOP8 package | 3 |
CAD (KiCad official)
- Symbol:
HX4424-S - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
hx4424-s-etched.step/hx4424-s-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hx4424-s.step/hx4424-s.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ZHHXDZ datasheet (5 pp, sha256
995df35b92b43c12, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).