component
HX4310-S
Public Made by Adomby adom
ZHHXDZ Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
HX4310-S
ZHHXDZ · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOP-8
HX4310-S from ZHHXDZ, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTPUT 1 | output | Op Amp 1 (voltage-control) output; output voltage swing is 27 V min high and 100 mV max low at VCC=30V, RL=10kΩ. |
| 2 | INPUT 1- | input | Op Amp 1 inverting input; input bias current is 20 nA typ and 150 nA max at TA=+25°C, and input voltages must stay within -0.3 V to VCC+0.3 V. |
| 3 | INPUT 1+/VKA | input | Op Amp 1 non-inverting input, internally tied to the 2.5 V shunt reference output (cathode VKA); reference cathode current IK is limited to 100 mA max. |
| 4 | GND | power_in | Ground reference for the device; VCC is specified as VCC to GND, with 40 V absolute maximum supply voltage. |
| 5 | INPUT 2+ | input | Op Amp 2 (current-control) non-inverting input; input voltage range is 0 to VCC-1.5 V at VCC = 0 to 36 V. |
| 6 | INPUT 2- | input | Op Amp 2 inverting input; input differential voltage (VID, pins 5 and 6) is rated 40 V max. |
| 7 | OUTPUT 2 | output | Op Amp 2 output; output current is 20 mA min source and 8 mA min sink at VCC=15V, VO=2V. |
| 8 | VCC | power_in | Positive power supply; recommended range is 3 V to 36 V, with 40 V absolute maximum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ZHHXDZ |
| Package | SOP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Total Supply Current, excluding Current in Voltage Reference | 0.15 | 0.25 | mA | VCC=5V, no load, -40°C≤TA≤+105°C | 3 | ||
| Total Supply Current, excluding Current in Voltage Reference | 0.2 | 0.3 | mA | VCC=30V, no load, -40°C≤TA≤+105°C | 3 | ||
| Reference Voltage | 2.49 | 2.5 | 2.51 | V | IK=10mA, TA=+25°C | 3 | |
| Reference Voltage | 2.48 | 2.5 | 2.52 | V | IK=10mA, -40°C≤TA≤+105°C | 3 | |
| Reference Voltage Deviation over Full Temperature Range | 5 | 24 | mV | IK=10mA, TA=-40°C to +105°C | 3 | ||
| Minimum Cathode Current for Regulation | 0.01 | 0.05 | mA | 3 | |||
| Dynamic Impedance | 0.2 | 0.5 | Ω | IK=1mA to 80mA, f<1kHz | 3 | ||
| Op Amp 1 Input Offset Voltage | 0.5 | 3 | mV | TA=+25°C | 3 | ||
| Op Amp 1 Input Offset Voltage | 5 | mV | TA=-40°C to +105°C | 3 | |||
| Op Amp 1 Input Bias Current (Inverting Input Only) | 20 | 150 | nA | TA=+25°C | 3 | ||
| Op Amp 1 Large Signal Voltage Gain | 85 | 100 | dB | VCC=15V, RL=2kΩ, VO=1.4V to 11.4V | 3 | ||
| Op Amp 1 Power Supply Rejection Ratio | 70 | 90 | dB | VCC=5V to 30V | 3 | ||
| Op Amp 1 Output Current Source | 20 | 40 | mA | VCC=15V, VID=1V, VO=2V | 4 | ||
| Op Amp 1 Output Current Sink | 8 | 20 | mA | VCC=15V, VID=-1V, VO=2V | 4 | ||
| Op Amp 1 Output Voltage Swing (High) | 27 | 28 | V | VCC=30V, RL=10kΩ, VID=1V | 4 | ||
| Op Amp 1 Output Voltage Swing (Low) | 17 | 100 | mV | VCC=30V, RL=10kΩ, VID=-1V | 4 | ||
| Op Amp 1 Slew Rate | 0.2 | 0.5 | V/μs | VCC=18V, RL=2kΩ, AV=1, VIN=0.5V to 2V, CL=100pF | 4 | ||
| Op Amp 1 Unity Gain Bandwidth | 0.7 | 1 | MHz | VCC=30V, RL=2kΩ, CL=100pF | 4 | ||
| Op Amp 2 Input Offset Voltage | 0.5 | 2 | mV | TA=+25°C, VCC=5V or 20V | 4 | ||
| Op Amp 2 Input Offset Voltage | 3 | mV | TA=-40°C to +105°C, VCC=5V or 20V | 4 | |||
| Op Amp 2 Input Offset Current | 2 | 30 | nA | TA=+25°C | 4 | ||
| Op Amp 2 Input Bias Current | 20 | 150 | nA | TA=+25°C | 4 | ||
| Op Amp 2 Input Voltage Range | 0 | V | VCC=0 to 36V | 4 | |||
| Op Amp 2 Common Mode Rejection Ratio | 70 | 85 | dB | TA=+25°C, VCM=0 to 3.5V | 4 | ||
| Op Amp 2 Large Signal Voltage Gain | 85 | 100 | dB | VCC=15V, RL=2kΩ, VO=1.4V to 11.4V | 4 | ||
| Op Amp 2 Power Supply Rejection Ratio | 70 | 90 | dB | VCC=5V to 30V | 4 | ||
| Op Amp 2 Output Current Source | 20 | 40 | mA | VCC=15V, VID=1V, VO=2V | 4 | ||
| Op Amp 2 Output Current Sink | 8 | 20 | mA | VCC=15V, VID=-1V, VO=2V | 4 | ||
| Op Amp 2 Output Voltage Swing (High) | 27 | 28 | V | VCC=30V, RL=10kΩ, VID=1V | 4 | ||
| Op Amp 2 Output Voltage Swing (Low) | 17 | 100 | mV | VCC=30V, RL=10kΩ, VID=-1V | 4 | ||
| Op Amp 2 Slew Rate | 0.2 | 0.5 | V/μs | VCC=18V, RL=2kΩ, AV=1, VIN=0.5V to 2V, CL=100pF | 4 | ||
| Op Amp 2 Unity Gain Bandwidth | 0.7 | 1 | MHz | VCC=30V, RL=2kΩ, CL=100pF | 4 | ||
| Reference Voltage Tolerance | -0.4 | 0.4 | % | 1 | |||
| Power Supply Voltage (VCC to GND) | VCC | 40 | V | 3 | |||
| Op Amp 1 and 2 Input Voltage Range (Pins 2, 5, 6) | VIN | -0.3 | V | Pins 2, 5, 6 | 3 | ||
| Op Amp 2 Input Differential Voltage (Pins 5, 6) | VID | 40 | V | Pins 5, 6 | 3 | ||
| Voltage Reference Cathode Current (Pin 3) | IK | 100 | mA | Pin 3 | 3 | ||
| Power Dissipation | PD | 500 | mW | TA=+25°C | 3 | ||
| Operating Junction Temperature | TJ | 150 | °C | 3 | |||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 3 | ||
| Lead Temperature (Soldering 10sec) | TLEAD | 260 | °C | Soldering 10sec | 3 | ||
| Supply Voltage | 3 | 36 | V | 3 | |||
| Ambient Temperature | -40 | 105 | °C | 3 |
CAD (KiCad official)
- Symbol:
HX4310-S - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
hx4310-s-etched.step/hx4310-s-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hx4310-s.step/hx4310-s.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ZHHXDZ datasheet (6 pp, sha256
5349de4eb7c82825, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HX4310-S
**ZHHXDZ** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOP-8
HX4310-S from ZHHXDZ, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTPUT 1 | output | Op Amp 1 (voltage-control) output; output voltage swing is 27 V min high and 100 mV max low at VCC=30V, RL=10kΩ. |
| 2 | INPUT 1- | input | Op Amp 1 inverting input; input bias current is 20 nA typ and 150 nA max at TA=+25°C, and input voltages must stay within -0.3 V to VCC+0.3 V. |
| 3 | INPUT 1+/VKA | input | Op Amp 1 non-inverting input, internally tied to the 2.5 V shunt reference output (cathode VKA); reference cathode current IK is limited to 100 mA max. |
| 4 | GND | power_in | Ground reference for the device; VCC is specified as VCC to GND, with 40 V absolute maximum supply voltage. |
| 5 | INPUT 2+ | input | Op Amp 2 (current-control) non-inverting input; input voltage range is 0 to VCC-1.5 V at VCC = 0 to 36 V. |
| 6 | INPUT 2- | input | Op Amp 2 inverting input; input differential voltage (VID, pins 5 and 6) is rated 40 V max. |
| 7 | OUTPUT 2 | output | Op Amp 2 output; output current is 20 mA min source and 8 mA min sink at VCC=15V, VO=2V. |
| 8 | VCC | power_in | Positive power supply; recommended range is 3 V to 36 V, with 40 V absolute maximum. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ZHHXDZ |
| Package | SOP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Total Supply Current, excluding Current in Voltage Reference | | | 0.15 | 0.25 | mA | VCC=5V, no load, -40°C≤TA≤+105°C | 3 |
| Total Supply Current, excluding Current in Voltage Reference | | | 0.2 | 0.3 | mA | VCC=30V, no load, -40°C≤TA≤+105°C | 3 |
| Reference Voltage | | 2.49 | 2.5 | 2.51 | V | IK=10mA, TA=+25°C | 3 |
| Reference Voltage | | 2.48 | 2.5 | 2.52 | V | IK=10mA, -40°C≤TA≤+105°C | 3 |
| Reference Voltage Deviation over Full Temperature Range | | | 5 | 24 | mV | IK=10mA, TA=-40°C to +105°C | 3 |
| Minimum Cathode Current for Regulation | | | 0.01 | 0.05 | mA | | 3 |
| Dynamic Impedance | | | 0.2 | 0.5 | Ω | IK=1mA to 80mA, f<1kHz | 3 |
| Op Amp 1 Input Offset Voltage | | | 0.5 | 3 | mV | TA=+25°C | 3 |
| Op Amp 1 Input Offset Voltage | | | | 5 | mV | TA=-40°C to +105°C | 3 |
| Op Amp 1 Input Bias Current (Inverting Input Only) | | | 20 | 150 | nA | TA=+25°C | 3 |
| Op Amp 1 Large Signal Voltage Gain | | 85 | 100 | | dB | VCC=15V, RL=2kΩ, VO=1.4V to 11.4V | 3 |
| Op Amp 1 Power Supply Rejection Ratio | | 70 | 90 | | dB | VCC=5V to 30V | 3 |
| Op Amp 1 Output Current Source | | 20 | 40 | | mA | VCC=15V, VID=1V, VO=2V | 4 |
| Op Amp 1 Output Current Sink | | 8 | 20 | | mA | VCC=15V, VID=-1V, VO=2V | 4 |
| Op Amp 1 Output Voltage Swing (High) | | 27 | 28 | | V | VCC=30V, RL=10kΩ, VID=1V | 4 |
| Op Amp 1 Output Voltage Swing (Low) | | | 17 | 100 | mV | VCC=30V, RL=10kΩ, VID=-1V | 4 |
| Op Amp 1 Slew Rate | | 0.2 | 0.5 | | V/μs | VCC=18V, RL=2kΩ, AV=1, VIN=0.5V to 2V, CL=100pF | 4 |
| Op Amp 1 Unity Gain Bandwidth | | 0.7 | 1 | | MHz | VCC=30V, RL=2kΩ, CL=100pF | 4 |
| Op Amp 2 Input Offset Voltage | | | 0.5 | 2 | mV | TA=+25°C, VCC=5V or 20V | 4 |
| Op Amp 2 Input Offset Voltage | | | | 3 | mV | TA=-40°C to +105°C, VCC=5V or 20V | 4 |
| Op Amp 2 Input Offset Current | | | 2 | 30 | nA | TA=+25°C | 4 |
| Op Amp 2 Input Bias Current | | | 20 | 150 | nA | TA=+25°C | 4 |
| Op Amp 2 Input Voltage Range | | 0 | | | V | VCC=0 to 36V | 4 |
| Op Amp 2 Common Mode Rejection Ratio | | 70 | 85 | | dB | TA=+25°C, VCM=0 to 3.5V | 4 |
| Op Amp 2 Large Signal Voltage Gain | | 85 | 100 | | dB | VCC=15V, RL=2kΩ, VO=1.4V to 11.4V | 4 |
| Op Amp 2 Power Supply Rejection Ratio | | 70 | 90 | | dB | VCC=5V to 30V | 4 |
| Op Amp 2 Output Current Source | | 20 | 40 | | mA | VCC=15V, VID=1V, VO=2V | 4 |
| Op Amp 2 Output Current Sink | | 8 | 20 | | mA | VCC=15V, VID=-1V, VO=2V | 4 |
| Op Amp 2 Output Voltage Swing (High) | | 27 | 28 | | V | VCC=30V, RL=10kΩ, VID=1V | 4 |
| Op Amp 2 Output Voltage Swing (Low) | | | 17 | 100 | mV | VCC=30V, RL=10kΩ, VID=-1V | 4 |
| Op Amp 2 Slew Rate | | 0.2 | 0.5 | | V/μs | VCC=18V, RL=2kΩ, AV=1, VIN=0.5V to 2V, CL=100pF | 4 |
| Op Amp 2 Unity Gain Bandwidth | | 0.7 | 1 | | MHz | VCC=30V, RL=2kΩ, CL=100pF | 4 |
| Reference Voltage Tolerance | | -0.4 | | 0.4 | % | | 1 |
| Power Supply Voltage (VCC to GND) | VCC | | | 40 | V | | 3 |
| Op Amp 1 and 2 Input Voltage Range (Pins 2, 5, 6) | VIN | -0.3 | | | V | Pins 2, 5, 6 | 3 |
| Op Amp 2 Input Differential Voltage (Pins 5, 6) | VID | | | 40 | V | Pins 5, 6 | 3 |
| Voltage Reference Cathode Current (Pin 3) | IK | | | 100 | mA | Pin 3 | 3 |
| Power Dissipation | PD | | | 500 | mW | TA=+25°C | 3 |
| Operating Junction Temperature | TJ | | | 150 | °C | | 3 |
| Storage Temperature Range | TSTG | -65 | | 150 | °C | | 3 |
| Lead Temperature (Soldering 10sec) | TLEAD | | | 260 | °C | Soldering 10sec | 3 |
| Supply Voltage | | 3 | | 36 | V | | 3 |
| Ambient Temperature | | -40 | | 105 | °C | | 3 |
## CAD (KiCad official)
- Symbol: `HX4310-S`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `hx4310-s-etched.step` / `hx4310-s-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hx4310-s.step` / `hx4310-s.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [ZHHXDZ datasheet](docs/hx4310-s-datasheet.pdf) (6 pp, sha256 `5349de4eb7c82825`, retrieved 2026-10-18, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hx4310-s-datasheet.pdf)