main
Ray
hx4057a: laser-etched CAD + chip hero (factory 2.0.0 backfill)
3524039
HX4057A
HX hengjiaxing · Battery Management · SOT-23-6
HX4057A from HX hengjiaxing, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CHRG | output | Open-drain charge-status indicator. Pulled low internally while charging is in progress; enters weak (~20 uA) pull-down when charging completes; high-impedance when VCC is below UVLO or (VCC - VBAT) < 30 mV. VCHRG(low) typ 0.3 V @ 5 mA. |
| 2 | GND | power_in | Device ground / power-supply return. |
| 3 | BAT | power_out | Battery positive-terminal connection. Sources the charge current and regulates to a 4.2 V ±1% float voltage. In shutdown or sleep, BAT leakage is < 3 uA. Absolute max 7 V, continuous BAT current rated to 600 mA (typ. 500 mA charge). |
| 4 | VCC | power_in | Input supply (USB or adapter). Operating range 4.0-6 V (typ 5 V, abs max 7 V). Charging enables when VCC exceeds UVLO (~3.7 V rising) and is at least ~100 mV above BAT; otherwise the part enters low-power shutdown (< 3 uA on BAT). |
| 5 | STDBY | output | Open-drain charge-complete indicator. Pulled low internally when charging has finished; otherwise high-impedance. VSTDBY(low) typ 0.3 V @ 5 mA. |
| 6 | PROG | input | Charge-current programming pin. A resistor RPROG from PROG to GND sets the constant-current level: IBAT = 1000 V / RPROG (e.g. 2 kΩ → 500 mA, 10 kΩ → 100 mA). Pin regulates to 1 V in CC mode and to 0.1 V during trickle charge; charging terminates when PROG falls below ~100 mV for > 2 ms (C/10 detect). Absolute max ±0.3 V (with respect to GND) / 600 uA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HX hengjiaxing |
| Package | SOT-23-6 |
| Category | PMIC |
| Pins | 6 |
Ordering variants
Same part, different packaging or reel option.
HX4057A
CAD (KiCad official)
- Symbol:
HX4057A - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
hx4057a-etched.step/hx4057a-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hx4057a.step/hx4057a.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HX hengjiaxing datasheet (6 pp, sha256
195943bf568b6bbe, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HX4057A
**HX hengjiaxing** · Battery Management · SOT-23-6
HX4057A from HX hengjiaxing, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CHRG | output | Open-drain charge-status indicator. Pulled low internally while charging is in progress; enters weak (~20 uA) pull-down when charging completes; high-impedance when VCC is below UVLO or (VCC - VBAT) < 30 mV. VCHRG(low) typ 0.3 V @ 5 mA. |
| 2 | GND | power_in | Device ground / power-supply return. |
| 3 | BAT | power_out | Battery positive-terminal connection. Sources the charge current and regulates to a 4.2 V ±1% float voltage. In shutdown or sleep, BAT leakage is < 3 uA. Absolute max 7 V, continuous BAT current rated to 600 mA (typ. 500 mA charge). |
| 4 | VCC | power_in | Input supply (USB or adapter). Operating range 4.0-6 V (typ 5 V, abs max 7 V). Charging enables when VCC exceeds UVLO (~3.7 V rising) and is at least ~100 mV above BAT; otherwise the part enters low-power shutdown (< 3 uA on BAT). |
| 5 | STDBY | output | Open-drain charge-complete indicator. Pulled low internally when charging has finished; otherwise high-impedance. VSTDBY(low) typ 0.3 V @ 5 mA. |
| 6 | PROG | input | Charge-current programming pin. A resistor RPROG from PROG to GND sets the constant-current level: IBAT = 1000 V / RPROG (e.g. 2 kΩ → 500 mA, 10 kΩ → 100 mA). Pin regulates to 1 V in CC mode and to 0.1 V during trickle charge; charging terminates when PROG falls below ~100 mV for > 2 ms (C/10 detect). Absolute max ±0.3 V (with respect to GND) / 600 uA. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HX hengjiaxing |
| Package | SOT-23-6 |
| Category | PMIC |
| Pins | 6 |
## Ordering variants
Same part, different packaging or reel option.
- `HX4057A`
## CAD (KiCad official)
- Symbol: `HX4057A`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `hx4057a-etched.step` / `hx4057a-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hx4057a.step` / `hx4057a.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HX hengjiaxing datasheet](docs/hx4057a-datasheet.pdf) (6 pp, sha256 `195943bf568b6bbe`, retrieved 2026-08-17, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hx4057a-datasheet.pdf)