component
HX3483-S
Public Made by Adomby adom
ZHHXDZ RS-485 / RS-422 ICs, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 17d ago |
| viewers | 17d ago |
| hx3483-s-etched.glb | 17d ago |
| hx3483-s-etched.step | 17d ago |
| hx3483-s-hero.glb | 17d ago |
| hx3483-s-hero.overlay.json | 17d ago |
| hx3483-s.glb | 17d ago |
| hx3483-s.kicad_mod | 17d ago |
| hx3483-s.kicad_sym | 17d ago |
| hx3483-s.lbr | 17d ago |
| hx3483-s.step | 17d ago |
| package.json | 17d ago |
| page.json | 17d ago |
| README.md | 17d ago |
HX3483-S
ZHHXDZ · RS-485 / RS-422 ICs · SOP-8
HX3483-S from ZHHXDZ, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver output: RO is high when V(A)-V(B) is at or above -50 mV and low when V(A)-V(B) is at or below -200 mV, per the receive truth table. |
| 2 | RE | input | Receiver output enable, active low: the receiver is enabled when RE is low and turned off when RE is high. |
| 3 | DE | input | Driver output enable: when DE is high the driver output is enabled, and when DE is low the driver turns off and its output enters a high-resistance state. |
| 4 | DI | input | Driver input: when DI is low the bus output A is low and B is high, and when DI is high A is high and B is low. |
| 5 | GND | power_in | Ground reference for the device. |
| 6 | A | bidirectional | Non-inverting bus terminal shared by the driver output and receiver input; the datasheet gives ESD protection of ±15 kV human body model on A/B. |
| 7 | B | bidirectional | Inverting bus terminal shared by the driver output and receiver input; the datasheet gives ESD protection of ±15 kV human body model on A/B. |
| 8 | VCC | power_in | Positive supply pin; the datasheet states a 3.3 V/5 V supply with 3.3 V ±5% used for the DC characteristics and a +6.0 V absolute maximum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ZHHXDZ |
| Package | SOP-8 |
| Category | Interface |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (VCC) absolute maximum | VCC | -0.3 | 6 | V | 2 | ||
| Control input voltage (DE, RE) absolute maximum | DE,RE | -0.3 | 6 | V | 2 | ||
| Driver input voltage (DI) absolute maximum | DI | -0.3 | 6 | V | 2 | ||
| Bus voltage (A, B) absolute maximum | A,B | -8 | 13 | V | 2 | ||
| Storage temperature range | TSTG | -65 | 150 | ℃ | 2 | ||
| Operating temperature range | TOP | -40 | 125 | ℃ | 2 | ||
| Lead soldering temperature | 300 | ℃ | 10 seconds | 2 | |||
| Power dissipation (SOP-8) | PD | 471 | mW | SOP-8, above 70℃ | 2 | ||
| ESD protection, bus pins (human body model) | ESD | -15 | 15 | kV | Pin A, Pin B | 2 | |
| Supply voltage tolerance | VCC | -5 | 5 | % | Vcc=+3.3V | 2 | |
| Supply voltage (nominal) | VCC | 3.3 | V | Vcc=+3.3V±5% | 2 | ||
| Receiver input impedance | RIN | 96 | kΩ | -7V≤VCM≤+12V | 2 | ||
| Shutdown exit time (RE high, DE low hold time) | tSHDN | 50 | 200 | 600 | ns | 2 | |
| Shutdown current | ICC | 1.8 | uA | RE high, DE low (shutdown) | 4 | ||
| Power supply current | ICC | 600 | uA | No load, RE=DI=GND or Vcc | 2 |
CAD (KiCad official)
- Symbol:
HX3483-S - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
hx3483-s-etched.step/hx3483-s-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hx3483-s.step/hx3483-s.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ZHHXDZ datasheet (5 pp, sha256
3f25e490a1185a8e, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).