component
HX33152-P
Public Made by Adomby adom
ZHHXDZ Gate Drivers, DIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
HX33152-P
ZHHXDZ · Gate Drivers · DIP-8
HX33152-P from ZHHXDZ, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Labeled NC in the pin diagram; the datasheet gives no function or connection requirement for this pin. |
| 2 | IN A | input | Channel A logic input accepting TTL or CMOS levels, with logic-input protection to -5V and a threshold that does not depend on supply voltage (VIH 2.4 V min, VIL 0.8 V max). |
| 3 | GND | power_in | Ground pin; the datasheet states the ground pins withstand up to 5V noise spikes (either polarity). |
| 4 | IN B | input | Channel B logic input accepting TTL or CMOS levels, with logic-input protection to -5V and a threshold that does not depend on supply voltage (VIH 2.4 V min, VIL 0.8 V max). |
| 5 | OUT B | output | Channel B driver output with 1.5 A peak output current, swinging within 25 mV of the supply or ground, and latch-up protected to >500 mA reverse current. |
| 6 | VDD | power_in | Positive supply pin; the datasheet specifies an operating range of 4.5 V to 18 V. |
| 7 | OUT A | output | Channel A driver output with 1.5 A peak output current, swinging within 25 mV of the supply or ground, and latch-up protected to >500 mA reverse current. |
| 8 | NC | unconnected | Labeled NC in the pin diagram; the datasheet gives no function or connection requirement for this pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ZHHXDZ |
| Package | DIP-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Logic 1 Input Voltage (row 1) | VIH | 2.4 | 1.4 | V | 2 | ||
| Logic 1 Input Voltage (row 2) | VIH | 2.4 | 1.5 | V | 2 | ||
| Logic 0 Input Voltage (row 1) | VIL | 1.1 | 0.8 | V | 2 | ||
| Logic 0 Input Voltage (row 2) | VIL | 1 | 0.8 | V | 2 | ||
| Input Current | IIN | -1 | 1 | μA | 2 | ||
| Low Output Voltage | VOL | 0.025 | V | 2 | |||
| Output Resistance (row 1) | RO | 6 | 10 | Ω | 2 | ||
| Output Resistance (row 2) | RO | 8 | 12 | Ω | 2 | ||
| Latch-Up Protection | I | 500 | mA | printed as >500 mA reverse current | 2 | ||
| Rise Time (row 1) | tr | 18 | 30 | ns | 2 | ||
| Rise Time (row 2) | tr | 20 | 40 | ns | 2 | ||
| Fall Time (row 1) | tf | 15 | 20 | ns | 2 | ||
| Fall Time (row 2) | tf | 29 | 40 | ns | 2 | ||
| Delay Time (row 1) | tD1 | 17 | 30 | ns | 2 | ||
| Delay Time (row 2) | tD1 | 19 | 40 | ns | 2 | ||
| Delay Time | tD2 | 23 | 50 | ns | 2 | ||
| Pulse Width | tPW | 400 | ns | 3 | |||
| Power Supply Current (row 1) | IS | 0.6 | 1.4 | 4.5 | mA | 3 | |
| Power Supply Current (row 2) | IS | 1.5 | 8 | mA | 3 | ||
| Power Supply Current (row 3) | IS | 0.18 | 0.4 | mA | 3 | ||
| Power Supply Current (row 4) | IS | 0.19 | 0.6 | mA | 3 | ||
| Maximum Junction Temperature | TJ | 150 | °C | 3 | |||
| Storage Temperature Range | TS | -65 | 150 | °C | 3 | ||
| Lead Temperature | 300 | °C | 3 | ||||
| Junction Operating Temperature Range | TJ | 0 | 70 | °C | 3 | ||
| Operating Supply Range | 4.5 | 18 | V | stated in Features list as 4.5V to 18V operating range | 1 | ||
| Peak Output Current | IPK | 1.5 | A | 2 | |||
| Thermal Resistance, junction to ambient (PDIP 8-Ld) | JA | 130 | °C/W | 3 | |||
| Thermal Resistance, junction to case (PDIP 8-Ld) | JC | 42 | °C/W | 3 |
CAD (KiCad official)
- Symbol:
HX33152-P - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files:
hx33152-p-etched.step/hx33152-p-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hx33152-p.step/hx33152-p.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ZHHXDZ datasheet (4 pp, sha256
014bd5af848b57da, retrieved 2026-10-15, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HX33152-P
**ZHHXDZ** · Gate Drivers · DIP-8
HX33152-P from ZHHXDZ, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Labeled NC in the pin diagram; the datasheet gives no function or connection requirement for this pin. |
| 2 | IN A | input | Channel A logic input accepting TTL or CMOS levels, with logic-input protection to -5V and a threshold that does not depend on supply voltage (VIH 2.4 V min, VIL 0.8 V max). |
| 3 | GND | power_in | Ground pin; the datasheet states the ground pins withstand up to 5V noise spikes (either polarity). |
| 4 | IN B | input | Channel B logic input accepting TTL or CMOS levels, with logic-input protection to -5V and a threshold that does not depend on supply voltage (VIH 2.4 V min, VIL 0.8 V max). |
| 5 | OUT B | output | Channel B driver output with 1.5 A peak output current, swinging within 25 mV of the supply or ground, and latch-up protected to >500 mA reverse current. |
| 6 | VDD | power_in | Positive supply pin; the datasheet specifies an operating range of 4.5 V to 18 V. |
| 7 | OUT A | output | Channel A driver output with 1.5 A peak output current, swinging within 25 mV of the supply or ground, and latch-up protected to >500 mA reverse current. |
| 8 | NC | unconnected | Labeled NC in the pin diagram; the datasheet gives no function or connection requirement for this pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ZHHXDZ |
| Package | DIP-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Logic 1 Input Voltage (row 1) | VIH | 2.4 | 1.4 | | V | | 2 |
| Logic 1 Input Voltage (row 2) | VIH | 2.4 | 1.5 | | V | | 2 |
| Logic 0 Input Voltage (row 1) | VIL | | 1.1 | 0.8 | V | | 2 |
| Logic 0 Input Voltage (row 2) | VIL | | 1 | 0.8 | V | | 2 |
| Input Current | IIN | -1 | | 1 | μA | | 2 |
| Low Output Voltage | VOL | | | 0.025 | V | | 2 |
| Output Resistance (row 1) | RO | | 6 | 10 | Ω | | 2 |
| Output Resistance (row 2) | RO | | 8 | 12 | Ω | | 2 |
| Latch-Up Protection | I | 500 | | | mA | printed as >500 mA reverse current | 2 |
| Rise Time (row 1) | tr | | 18 | 30 | ns | | 2 |
| Rise Time (row 2) | tr | | 20 | 40 | ns | | 2 |
| Fall Time (row 1) | tf | | 15 | 20 | ns | | 2 |
| Fall Time (row 2) | tf | | 29 | 40 | ns | | 2 |
| Delay Time (row 1) | tD1 | | 17 | 30 | ns | | 2 |
| Delay Time (row 2) | tD1 | | 19 | 40 | ns | | 2 |
| Delay Time | tD2 | | 23 | 50 | ns | | 2 |
| Pulse Width | tPW | 400 | | | ns | | 3 |
| Power Supply Current (row 1) | IS | 0.6 | 1.4 | 4.5 | mA | | 3 |
| Power Supply Current (row 2) | IS | | 1.5 | 8 | mA | | 3 |
| Power Supply Current (row 3) | IS | | 0.18 | 0.4 | mA | | 3 |
| Power Supply Current (row 4) | IS | | 0.19 | 0.6 | mA | | 3 |
| Maximum Junction Temperature | TJ | | | 150 | °C | | 3 |
| Storage Temperature Range | TS | -65 | | 150 | °C | | 3 |
| Lead Temperature | | | | 300 | °C | | 3 |
| Junction Operating Temperature Range | TJ | 0 | | 70 | °C | | 3 |
| Operating Supply Range | | 4.5 | | 18 | V | stated in Features list as 4.5V to 18V operating range | 1 |
| Peak Output Current | IPK | | 1.5 | | A | | 2 |
| Thermal Resistance, junction to ambient (PDIP 8-Ld) | JA | | 130 | | °C/W | | 3 |
| Thermal Resistance, junction to case (PDIP 8-Ld) | JC | | 42 | | °C/W | | 3 |
## CAD (KiCad official)
- Symbol: `HX33152-P`
- Footprint: `Package_DIP:DIP-8_W7.62mm`
- 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files: `hx33152-p-etched.step` / `hx33152-p-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hx33152-p.step` / `hx33152-p.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [ZHHXDZ datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8552918507529519104) (4 pp, sha256 `014bd5af848b57da`, retrieved 2026-10-15, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hx33152-p-datasheet.pdf)