main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers hx3248c-agc: viewers rendered from the public page · Ray
hx3248c-agc-etched.glb Publish 0.1.0 · Ray
hx3248c-agc-etched.step hx3248c-agc: factory component page (tier=lcsc) · Ray
hx3248c-agc-hero.glb hx3248c-agc: hero GLB from the etched model (keeps the MPN mark) · Ray
hx3248c-agc-hero.overlay.json Publish 0.1.0 · Ray
hx3248c-agc.glb Publish 0.1.0 · Ray
hx3248c-agc.kicad_mod Publish 0.1.0 · Ray
hx3248c-agc.kicad_sym Publish 0.1.0 · Ray
hx3248c-agc.lbr Publish 0.1.0 · Ray
hx3248c-agc.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 9 pins · Ray

HX3248C-AGC

HEXIN · LED Drivers · SOP-8-EP

HX3248C-AGC from HEXIN, in a SOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OVP input Overvoltage protection pin that programs the VOUT overvoltage protection level, with the OVP threshold stated as 1.212V rising.
2 VIN power_in Input supply pin with an operating voltage range of 2.2V to 6V that must be locally bypassed.
3 SW output Switch output pin that connects the inductor and diode, with a maximum switch voltage of 30V and a MOSFET on-resistance of 50mΩ; minimize the trace area here to reduce EMI.
4 SW output Switch output pin that connects the inductor and diode, with a maximum switch voltage of 30V and a MOSFET on-resistance of 50mΩ; minimize the trace area here to reduce EMI.
5 GND power_in Ground pin for the device.
6 GND power_in Ground pin for the device.
7 FB input Feedback pin with a 200mV reference voltage, where the cathode of the lowest LED and the RSET resistor connect, and the LED current is set by 200mV/RSET.
8 EN input ON/OFF control pin that enables the device above a 0.7V rising threshold and disables it below a 0.5V falling threshold.
9 SW output Exposed pad that is internally connected to SW and must be soldered to the PCB.

Key specifications

Parameter Value
Manufacturer HEXIN
Package SOP-8-EP
Category Display Modules / LED Drivers / Display Drivers
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Voltage Range VIN 2.2 6 V Operating Conditions: VIN = 3V, TA = 25°C, unless otherwise specified 3
Operating Temperature Range -40 85 °C Note 2: guaranteed 0°C to 85°C; assured by design over -40°C to 85°C 2
Supply Voltage 7 V 2
SW Voltage 36 V 2
FB Voltage 7 V 2
EN Voltage 7 V 2
OVP Voltage 7 V 2
Storage Temperature Range -65 150 °C 2
Lead Temperature (Soldering) 300 °C Soldering, 10 sec 2
Feedback Voltage VFB 200 mV TA = 25℃, ILOAD = 1mA 3
FB Pin Bias Current IFB 60 nA EN=GND 3
Operating quiescent current into VIN IQ 100 uA IOUT = 0 mA, not switching 3
Shutdown current ISD(OUT) 20 uA 3
Switching Frequency FSW 800 KHz 3
Maximum switch voltage VSW 30 V 3
MOSFET on-resistance Rds(ON) 50 mΩ 3
Maximum Duty Cycle DC 90 % 3
Output overvoltage protection VOVP 1.212 V VOUT rising 3
EN Falling Threshold VENL 0.5 V 3
EN Rising Threshold VENH 0.7 V 3

CAD (KiCad official)

  • Symbol: HX3248C-AGC
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm
  • 3D model: SOP-8-EP (KiCad packages3D, STEP)
  • 3D model files: hx3248c-agc-etched.step / hx3248c-agc-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hx3248c-agc.step / hx3248c-agc.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HEXIN datasheet (8 pp, sha256 f9186b2b610e0e72, retrieved 2026-11-10, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF