component

HX3085-S

Public Made by Adom

by adom

ZHHXDZ RS-485 / RS-422 ICs, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentinterfacehx3085-sfactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
hx3085-s / README.md
History Download
Ray Publish 0.1.0 96d817e 17d ago

HX3085-S

ZHHXDZ · RS-485 / RS-422 ICs · SOP-8

HX3085-S from ZHHXDZ, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RO output Receiver data output: driven high when the A-B differential input is at or above -50 mV and low when it is at or below -200 mV, per the receiver truth table.
2 RE input Receiver output enable: a low level enables the receiver output, and a high level with DE low puts RO into high-impedance (Z) state.
3 DE input Driver output enable: a high level enables the driver (chip in transmit state) and a low level disables it, placing A and B in high-impedance (Z) state.
4 DI input Driver data input: with DE high, a high level on DI drives A high and B low, and a low level drives A low and B high.
5 GND power_in Ground reference for the device; all voltages are referenced to ground.
6 A bidirectional Driver differential output (non-inverting) and receiver differential input; the A/B bus pins carry ±15 kV HBM ESD protection.
7 B bidirectional Driver differential output (inverting) and receiver differential input; the A/B bus pins carry ±15 kV HBM ESD protection.
8 VCC power_in Power supply; the datasheet specifies a working voltage range of 4.5 V to 5.5 V (nominal 5 V ±5%).

Key specifications

Parameter Value
Manufacturer ZHHXDZ
Package SOP-8
Category Interface
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 6 V 2
Control input voltage DE,RE 6 V 2
Drive input voltage DI 6 V 2
Drive output voltage / receive input voltage A,B -7 12 V 2
Storage temperature range TSTG -55 150 ℃ 2
Operating temperature range TOP -40 85 ℃ 2
Maximum operating temperature range TMOP -55 125 ℃ 2
Power dissipation PD 470 mW SOP-8 (+70℃ or above) 2
Solder temperature TL 300 ℃ 10 seconds 2
Working voltage range Vcc 4.5 5.5 V 2
Driver differential output (no load) VOD1 5 V No load 2
Driver differential output (with load) VOD2 1.5 V R=54Ω or R=27Ω, Figure 1 2
Change in VOD when DI changes ∆VOD 0.2 V 2
Driver common mode output voltage VOC 1 3 V 2
Change in VOC when DI changes ∆VOC 0.2 V 2
Input high voltage VIH 2 V DE,RE,DI 2
Input low voltage VIL 0.8 V DE,RE,DI 2
Input current IIN1 -2 2 uA DE,RE,DI 2
Input current (A, B) IIN2 40 90 uA DE=0V, Vcc=5V, VIN=5V 2
Input current (A, B) IIN2 60 100 uA DE=0V, Vcc=5V, VIN=0V 2
Receiver differential input threshold voltage VTH -200 -50 mV -7V ≤VCM≤+12V 2
Differential receiver threshold change ∆VTH 25 mV 2
Receiver output high level VOH 4 V IO=-8mA 2
Receiver output low level VOL 0.4 V IO=8mA 2
Receiver output high-impedance leakage current IOZR 1 uA 0.4V ≤Vo≤2.4V 2
Receiver input impedance RIN 96 kΩ 2
No load operating current ICC 480 600 uA -7V ≤VCM≤+12V, RE=DI=GND or DE=Vcc 2
No load operating current ICC 450 600 uA DE=GND 2
Receiver output short-circuit current IOSR 95 mA 0V ≤VRO≤ 2
ESD protection (human body model) -15 15 kV Between A/B, human body mode 2
Drive input to output tDPLH 250 1000 nS RDIFF=50Ω, CL1=CL2=100pF, Figure 3,5 2
Driver output offset /tDPLH, tDPHL/ tDSKEW -100 100 nS 2
Drive enables high output tDZH 2500 nS CL=100pF, Figure 4,6, S2 closed 2
Driver enables output to be low tDZL 2500 nS CL=100pF, Figure 4,6, S1 closed 2
Drive from low to off tDLZ 100 nS CL=15pF, Figure 4,6, S1 closed 2
Drive from high to off tDHZ 100 nS CL=15pF, Figure 4,6, S2 closed 2
Receiver input to output (low-to-high) tRPLH 200 nS /VID/ ≥2.0V; rising and falling time ≤15nS, Figure 7,9 2
Receiver input to output (high-to-low) tRPHL 200 nS /VID/ ≥2.0V; rising and falling time ≤15nS, Figure 7,9 2
Differential receiver offset tRSKEW -30 30 nS 2
The receiver stays on until output is low tRZL 20 50 nS S1 closed, CL=100pF, Figure 2,8 2
Enable the receiver to output high tRZH 20 50 nS S2 closed, CL=100pF, Figure 2,8 2
Receiver from low to off tRLZ 20 50 nS S1 closed, CL=100pF, Figure 2,8 2
Receiver from high to off tRHZ 20 50 nS S2 closed, CL=100pF, Figure 2,8 2
Driver output short-circuit current IOD 100 mA Short circuit current between A/B 2
Maximum data speed fMAX 250 500 Mbps 3

CAD (KiCad official)

  • Symbol: HX3085-S
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: hx3085-s-etched.step / hx3085-s-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hx3085-s.step / hx3085-s.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: ZHHXDZ datasheet (4 pp, sha256 e6ee816fe55fa5ec, retrieved 2026-10-17, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF