Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

HX3075-S

ZHHXDZ · RS-485 / RS-422 ICs · SOP-8

HX3075-S from ZHHXDZ, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RO output Receiver output: driven high when A-B is at or above -50 mV and low when A-B is at or below -200 mV, per the receiver truth table.
2 RE input Receiver output enable, active low: when RE is high the receiver is turned off, and when RE is high with DE low the whole chip is in shutdown.
3 DE input Driver output enable: when DE is high the driver output is enabled, and when DE is low the driver turns off and its output enters a high-impedance state.
4 DI input Driver input: when DI is high, A is driven high and B low; when DI is low, A is driven low and B high (with DE high).
5 GND power_in Ground reference for the device.
6 A bidirectional Non-inverting RS-485/RS-422 bus terminal, serving as driver output and receiver input; it has ±15 kV human-body-model ESD protection.
7 B bidirectional Inverting RS-485/RS-422 bus terminal, serving as driver output and receiver input; it has ±15 kV human-body-model ESD protection.
8 VCC power_in Supply pin for the 3.3 V or 5 V supply; the DC characteristics are specified at VCC = 3.3 V ±5% and the absolute maximum VCC is +6.0 V.

Key specifications

Parameter Value
Manufacturer ZHHXDZ
Package SOP-8
Category Interface
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (VCC) absolute maximum VCC 6 V 2
DE, RE input voltage absolute maximum DE,RE -0.3 6 V 2
DI input voltage absolute maximum DI -0.3 6 V 2
A, B bus pin voltage absolute maximum A,B -8 13 V 2
Storage temperature range TSTG -65 150 ℃ 2
Operating temperature range TOP -40 125 ℃ 2
Power dissipation SOP-8 PD 471 mW SOP-8, derate above 70 ℃ 2
Soldering lead temperature TL 300 ℃ 10 seconds 2
Supply voltage tolerance VCC -5 5 % nominal 3.3V supply 2
Input high voltage VIH1 2 V DE, DI, RE; DC characteristics Vcc=+3.3V±5%, TA=25℃ 2
Input low voltage VIL1 0.8 V DE, DI, RE; DC characteristics Vcc=+3.3V±5%, TA=25℃ 2
Receiver output low voltage VOL 0.4 V IO=4mA, VID=-1V 2
Receiver input impedance RIN 96 KΩ -7V≤VCM≤+12V 2
Receiver output short-circuit current IOSR -7 7 mA 2
Shutdown supply current 10 uA DE=GND, RE=Vcc 2
ESD protection, pins A and B, human body model -15 15 kV Pin A, Pin B, human body model 2
ESD protection, pins A and B, IEC61000-4-2 contact discharge -12 12 kV Pin A, Pin B, IEC61000-4-2 contact discharge 2
ESD protection, other pins, human body model -4 4 kV other pins, human body model 2

CAD (KiCad official)

  • Symbol: HX3075-S
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: hx3075-s-etched.step / hx3075-s-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hx3075-s.step / hx3075-s.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: ZHHXDZ datasheet (5 pp, sha256 d48f1777b19904f9, retrieved 2026-10-18, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF