main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers hx3072-s: viewers · Ray
hx3072-s-etched.glb Publish 0.1.0 · Ray
hx3072-s-etched.step hx3072-s: factory component page (tier=lcsc) · Ray
hx3072-s-hero.glb hx3072-s: hero GLB from the etched model (keeps the MPN mark) · Ray
hx3072-s-hero.overlay.json Publish 0.1.0 · Ray
hx3072-s.glb Publish 0.1.0 · Ray
hx3072-s.kicad_mod Publish 0.1.0 · Ray
hx3072-s.kicad_sym Publish 0.1.0 · Ray
hx3072-s.lbr Publish 0.1.0 · Ray
hx3072-s.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 8 pins · Ray

HX3072-S

ZHHXDZ · RS-485 / RS-422 ICs · SOP-8

HX3072-S from ZHHXDZ, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RO output Receiver output: driven high when A-B is at or above -50mV and driven low when A-B is at or below -200mV, per the receiver truth table.
2 RE input Receiver output enable, active low: when RE is high the receiver is turned off, and when RE is high and DE is low the whole chip is turned off.
3 DE input Driver output enable: when DE is high the driver output is enabled, and when DE is low the driver turns off and the output enters a high-resistance state.
4 DI input Driver input: when DE is high, a high level on DI drives A high and B low, and a low level drives A low and B high.
5 GND power_in Ground reference for the device.
6 A bidirectional Non-inverting driver output and non-inverting receiver input of the RS-485/RS-422 bus.
7 B bidirectional Inverting driver output and inverting receiver input of the RS-485/RS-422 bus.
8 VCC power_in Supply voltage pin; the datasheet specifies 3.3V/5V operation with the DC characteristics given at Vcc = +3.3V ±5%.

Key specifications

Parameter Value
Manufacturer ZHHXDZ
Package SOP-8
Category Interface
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Receiver input impedance RIN 96 kΩ -7V≤VCM≤+12V 2
Input high voltage VIH1 2 V DE, DI, RE 2
Input low voltage VIL1 0.8 V DE, DI, RE 2
Receiver output low voltage VOL 0.4 V IO=4mA, VID=-1V 2
Receiver output short-circuit current IOSR -7 7 mA 0V≤VO≤VCC 2
Shutdown supply current ISHDN 10 uA DE=GND, RE=Vcc 2
ESD protection, Pin A and Pin B (human body model) -15 15 kV Pin A, Pin B, human body model 2
ESD protection, other pins (human body model) -4 4 kV Other pins, human body model 2
Supply voltage VCC 6 V 2
Control input voltage (DE, RE) DE,RE -0.3 6 V 2
Driver input voltage DI -0.3 6 V 2
Bus pin voltage (A, B) A,B -8 13 V 2
Storage temperature TSTG -65 150 ℃ 2
Operating temperature TOP -40 125 ℃ 2
Power dissipation 471 mW SOP-8, derate above 70 ℃ 2
Lead temperature (soldering) 300 ℃ 10 seconds 2

CAD (KiCad official)

  • Symbol: HX3072-S
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: hx3072-s-etched.step / hx3072-s-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hx3072-s.step / hx3072-s.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: ZHHXDZ datasheet (5 pp, sha256 a80e5033659b495c, retrieved 2026-11-04, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF