main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs hx3001-afc: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers hx3001-afc: viewers · Ray
hx3001-afc-etched.fit.json hx3001-afc: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
hx3001-afc-etched.glb hx3001-afc: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
hx3001-afc-etched.step hx3001-afc: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
hx3001-afc.glb Publish 0.1.0 · Ray
hx3001-afc.kicad_mod Publish 0.1.0 · Ray
hx3001-afc.kicad_sym Publish 0.1.0 · Ray
hx3001-afc.lbr Publish 0.1.0 · Ray
hx3001-afc.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json hx3001-afc: specified limits as data (metadata.characteristics, 27 rows from the datasheet) · Ray
README.md hx3001-afc: specified limits as data (metadata.characteristics, 27 rows from the datasheet) · Ray

HX3001-AFC

HEXIN · DC-DC Converters · SOT-23-6

HX3001-AFC from HEXIN, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SW output Switch pin. Connect the boost inductor between SW and VIN. Internal NMOS (0.35Ω) and synchronous PMOS (0.45Ω) switch this node; keep PCB traces short and wide to reduce EMI and voltage overshoot. Absolute max -0.3V to 6.6V.
2 GND power_in Signal and power ground. Provide a short, direct PCB path between GND and the negative side of the output capacitor(s).
3 FB input Feedback input to the gm error amplifier. Connect the resistor divider tap here; output voltage is set by VOUT = 1.212V × [1 + (R1/R2)]. Reference feedback voltage is typ. 1.212V (1.165-1.241V); input bias current is ~1nA.
4 EN input Logic-controlled shutdown input, active-high enable. VENH ≥ 1V enables normal 1.4MHz operation; VENL ≤ 0.5V shuts the device down (IQ ≈ 2µA). Absolute max -0.3V to 6.6V; input leakage ≤ 1µA at 5.5V.
5 VOUT power_out Regulated output voltage pin (adjustable 2.5V to 5V). Once VOUT exceeds VIN, the device draws its bias from VOUT. Keep the trace from VOUT to the output filter capacitor(s) short and wide. Absolute max -0.3V to 6.6V.
6 VIN power_in Battery/input supply pin. Provides start-up bias; HX3001-AFC starts from 1V (input range 1V-4.4V, absolute max -0.3V to 5V). Once VOUT exceeds VIN, operation is largely independent of VIN.

Key specifications

Parameter Value
Manufacturer HEXIN
Package SOT-23-6
Category PMIC
Pins 6

Ordering variants

Same part, different packaging or reel option.

  • HX3001-AFC
  • HX3001-AFC7

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage Range (Adj.) VOUT 2.5 5 V Adjustable output; datasheet text: up to 5V with Schottky 4
Feedback Voltage VFB 1.165 1.212 1.241 V 4
Switching Frequency fOSC 1.1 1.4 1.7 MHz 4
Max Duty Cycle DC 80 87 % VFB = 1.15V 4
Minimum Start-up Voltage (HX3001-AFC) VSTART 1 1.3 V ILOAD = 1mA, For HX3001-AFC (Note 3) 4
Minimum Operating Voltage VMIN 0.6 0.75 V VEN = VIN 4
Quiescent Current (HX3001-AFC) IQ 280 μA For HX3001-AFC, VIN = 1.5V 4
Shutdown Current ISHDN 2 μA VEN = 0V, including switch leakage 4
Feedback Input Current IFB 1 nA VFB = 1.22V 4
En Input High VENH 1 V 4
En Input Low VENL 0.5 V 4
En Input Current IEN 0.01 1 μA VEN = 5.5V 4
NMOS Current Limit ILIM-N 700 850 mA 4
NMOS Switch Leakage ILK-N 0.1 5 μA VSW = 5V 4
PMOS Switch Leakage ILK-P 0.1 5 μA VSW = 0V 4
NMOS Switch On Resistance RNFET 0.35 Ω VOUT = 3.3V 4
PMOS Switch On Resistance RPFET 0.45 Ω VOUT = 3.3V 4
VIN (HX3001-AFC) input voltage VIN -0.3 5 V Absolute maximum ratings, VIN for HX3001-AFC 3
VOUT VOUT -0.3 6.6 V 3
VSW VSW -0.3 6.6 V 3
VEN VEN -0.3 6.6 V 3
Operating Temperature Range TA -40 85 ℃ Note 2: guaranteed performance 0℃ to 70℃; specs over -40℃ to 85℃ assured by design, characterization and SPC 3
Junction Temperature TJ -40 125 ℃ 3
Storage Temperature Range TSTG -65 150 ℃ 3
Lead Temperature (Soldering) TLEAD 265 ℃ 10 sec. 3
Input Voltage Operating Range (HX3001-AFC) VIN 1 4.4 V Model table, HX3001-AFC; VSTART 1V 3
Minimum Inductance L 2.2 μH For 3.6V and lower output voltage applications; 4.7μH required for VOUT above 3.6V 7

CAD (KiCad official)

  • Symbol: HX3001-AFC
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: hx3001-afc-etched.step / hx3001-afc-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hx3001-afc.step / hx3001-afc.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HEXIN datasheet (9 pp, sha256 26f26237bb3ce43a, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF