component
HX24LC16BDRG
Public Made by Adomby adom
HANSCHIP semiconductor EEPROM, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownHX24LC16BDRG
HANSCHIP semiconductor · EEPROM · SOP-8
HX24LC16BDRG from HANSCHIP semiconductor, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | input | Address input for device selection on I2C bus; no connect pin for HX24LC16B variants (can be tied to ground). |
| 2 | A1 | input | Address input for device selection on I2C bus; no connect pin for HX24LC16B variants (can be tied to ground). |
| 3 | A2 | input | Address input for device selection on I2C bus; no connect pin for HX24LC16B variants (can be tied to ground). |
| 4 | GND | power_in | Ground reference (0V). |
| 5 | SDA | bidirectional | Serial data input/output; open-drain bidirectional pin for I2C communication; may be wire-ORed with other open-drain devices. |
| 6 | SCL | input | Serial clock input; positive edge clocks data in, negative edge clocks data out; supports 400 kHz (1.8V, 2.5V, 2.7V) and 1 MHz (5V) operation. |
| 7 | WP | input | Write protect input; connect to GND for normal read/write operations; connect to VCC to enable write protection of full 16K array. |
| 8 | VCC | power_in | Power supply input; operating range 1.7V to 5.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HANSCHIP semiconductor |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
HX24LC16BDRG - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
hx24lc16bdrg-etched.step/hx24lc16bdrg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hx24lc16bdrg.step/hx24lc16bdrg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HANSCHIP semiconductor datasheet (15 pp, sha256
570f2bebce19de80, retrieved 2026-09-21, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).