main
Ray hx24lc128bdrg: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) e89243e
{
  "slug": "hx24lc128bdrg",
  "version": "0.1.0",
  "type": "component",
  "description": "HANSCHIP semiconductor EEPROM, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "memory",
    "hx24lc128bdrg"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "hx24lc128bdrg.kicad_sym",
    "hx24lc128bdrg.kicad_mod",
    "hx24lc128bdrg.glb",
    "hx24lc128bdrg.step",
    "hx24lc128bdrg.lbr",
    "docs/hero.png",
    "docs/hx24lc128bdrg-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "hx24lc128bdrg-etched.step"
  ],
  "visibility": {
    "public": true
  },
  "author": {
    "name": "Ray"
  },
  "component": {
    "mpn": "HX24LC128BDRG",
    "manufacturer": "HANSCHIP semiconductor",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "EEPROM",
    "parts": {
      "symbol": "hx24lc128bdrg.kicad_sym",
      "footprint": "hx24lc128bdrg.kicad_mod",
      "model_3d": "hx24lc128bdrg-etched.glb",
      "model_3d_plain": "hx24lc128bdrg.glb",
      "model_3d_step": "hx24lc128bdrg-etched.step",
      "model_3d_step_plain": "hx24lc128bdrg.step",
      "lbr": "hx24lc128bdrg.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "A0",
        "type": "input",
        "description": "Device address input bit 0. Hardwire to VCC or GND to set one of the LSBs of the I2C slave address, allowing up to 4 (with A1) devices on the same bus. Internally biased low if left floating and board VCC-plane capacitive coupling is <3 pF; otherwise tie to GND."
      },
      {
        "number": "2",
        "name": "A1",
        "type": "input",
        "description": "Device address input bit 1. Hardwire to VCC or GND to select the device's I2C slave address. Internally biased low if left floating (with the <3 pF coupling caveat); otherwise tie to GND."
      },
      {
        "number": "3",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect. Leave unconnected. (Note: the block diagram references an A2 address input, but on the 8-pin package this position is documented as NC.)"
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "5",
        "name": "SDA",
        "type": "bidirectional",
        "description": "Serial data. Bidirectional, open-drain - requires an external pull-up resistor. Can be wire-ORed with other open-drain/open-collector devices on the two-wire bus."
      },
      {
        "number": "6",
        "name": "SCL",
        "type": "input",
        "description": "Serial clock input. Positive edge clocks data into the EEPROM and negative edge clocks data out. Max 400 kHz at 1.8/2.7/3.3 V and 1 MHz at 5 V."
      },
      {
        "number": "7",
        "name": "WP",
        "type": "input",
        "description": "Write protect input. Tied to GND allows normal read/write; tied to VCC inhibits all writes to the full memory array. Internally biased low if left floating (with the <3 pF coupling caveat); otherwise tie to GND."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply, 1.8 V to 5.5 V. ICC ≈ 0.4 mA (read) / 2.0 mA (write) at 5 V, 400 kHz; standby current ISB ≈ 3 µA at 5.5 V."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "lcsc": "C2987262",
      "digikey": false,
      "mouser": false
    },
    "distributor_check": {
      "checked_at": "2026-10-05T19:01:00Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "models_3d": [
      {
        "file": "hx24lc128bdrg.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "hx24lc128bdrg-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "c5e2f7235f0980b431587cf79b49895acf3542f74081c380cf12f6f3802e5310",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}