main
Ray
hx24c256drg: laser-etched CAD + chip hero (factory 2.0.0 backfill)
42fc289
HX24C256DRG
HANSCHIP semiconductor · EEPROM · SOP-8
HX24C256DRG from HANSCHIP semiconductor, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | input | Device address input bit 0. Hardwire to VCC or GND to set one of the device address bits; may be left floating (internal pull-down to GND when board VCC-plane capacitive coupling is <3 pF). Combined with A1 to select one of up to 4 devices on the same I2C bus. |
| 2 | A1 | input | Device address input bit 1. Hardwire to VCC or GND to set the device I2C address; may be left floating (internal pull-down to GND under low coupling conditions). |
| 3 | NC | unconnected | No connect. Leave floating or tie to GND. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | SDA | bidirectional | Serial data line for the two-wire I2C interface. Open-drain output, requires an external pull-up resistor (typ. to VCC). Bi-directional; can be wire-ORed with other open-drain devices. |
| 6 | SCL | input | Serial clock input for the two-wire I2C interface. Data is clocked into the EEPROM on the positive edge and out on the negative edge. Supports 1 MHz @ 5V, 400 kHz @ 1.8/2.7/3.3V. |
| 7 | WP | input | Write Protect. Tie to GND for normal read/write operation; tie to VCC to inhibit all write operations (full 256K array protected). Internal pull-down to GND when board VCC-plane capacitive coupling is <3 pF; recommend tying to GND if coupling is >3 pF. |
| 8 | VCC | power_in | Power supply input. Wide operating range 1.8V to 5.5V. Absolute maximum +6.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HANSCHIP semiconductor |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
HX24C256DRGHX24C256DRG4HX24C256DRGPGHX24C256DRGDGKRG
CAD (KiCad official)
- Symbol:
HX24C256DRG - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
hx24c256drg-etched.step/hx24c256drg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hx24c256drg.step/hx24c256drg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HANSCHIP semiconductor datasheet (14 pp, sha256
aa353337ce1b7552, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HX24C256DRG
**HANSCHIP semiconductor** · EEPROM · SOP-8
HX24C256DRG from HANSCHIP semiconductor, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | input | Device address input bit 0. Hardwire to VCC or GND to set one of the device address bits; may be left floating (internal pull-down to GND when board VCC-plane capacitive coupling is <3 pF). Combined with A1 to select one of up to 4 devices on the same I2C bus. |
| 2 | A1 | input | Device address input bit 1. Hardwire to VCC or GND to set the device I2C address; may be left floating (internal pull-down to GND under low coupling conditions). |
| 3 | NC | unconnected | No connect. Leave floating or tie to GND. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | SDA | bidirectional | Serial data line for the two-wire I2C interface. Open-drain output, requires an external pull-up resistor (typ. to VCC). Bi-directional; can be wire-ORed with other open-drain devices. |
| 6 | SCL | input | Serial clock input for the two-wire I2C interface. Data is clocked into the EEPROM on the positive edge and out on the negative edge. Supports 1 MHz @ 5V, 400 kHz @ 1.8/2.7/3.3V. |
| 7 | WP | input | Write Protect. Tie to GND for normal read/write operation; tie to VCC to inhibit all write operations (full 256K array protected). Internal pull-down to GND when board VCC-plane capacitive coupling is <3 pF; recommend tying to GND if coupling is >3 pF. |
| 8 | VCC | power_in | Power supply input. Wide operating range 1.8V to 5.5V. Absolute maximum +6.5V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HANSCHIP semiconductor |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
## Ordering variants
Same part, different packaging or reel option.
- `HX24C256DRG`
- `HX24C256DRG4`
- `HX24C256DRGPG`
- `HX24C256DRGDGKRG`
## CAD (KiCad official)
- Symbol: `HX24C256DRG`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `hx24c256drg-etched.step` / `hx24c256drg-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hx24c256drg.step` / `hx24c256drg.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HANSCHIP semiconductor datasheet](docs/hx24c256drg-datasheet.pdf) (14 pp, sha256 `aa353337ce1b7552`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hx24c256drg-datasheet.pdf)