main
Ray hx24c08drg: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body… 643ff61
{
  "slug": "hx24c08drg",
  "version": "0.1.0",
  "type": "component",
  "description": "HANSCHIP semiconductor EEPROM, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "memory",
    "hx24c08drg"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "hx24c08drg.kicad_sym",
    "hx24c08drg.kicad_mod",
    "hx24c08drg.glb",
    "hx24c08drg.step",
    "hx24c08drg.lbr",
    "docs/hero.png",
    "docs/hx24c08drg-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "hx24c08drg-etched.step"
  ],
  "visibility": {
    "public": true
  },
  "author": {
    "name": "Ray"
  },
  "component": {
    "mpn": "HX24C08DRG",
    "manufacturer": "HANSCHIP semiconductor",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "EEPROM",
    "parts": {
      "symbol": "hx24c08drg.kicad_sym",
      "footprint": "hx24c08drg.kicad_mod",
      "model_3d": "hx24c08drg-etched.glb",
      "model_3d_plain": "hx24c08drg.glb",
      "model_3d_step": "hx24c08drg-etched.step",
      "model_3d_step_plain": "hx24c08drg.step",
      "lbr": "hx24c08drg.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "A0",
        "type": "input",
        "description": "Address input. On HX24C08, A0 is a no-connect (device address is decoded only from A2 and internal page bits); the datasheet states it may be tied to GND."
      },
      {
        "number": "2",
        "name": "A1",
        "type": "input",
        "description": "Address input. On HX24C08, A1 is a no-connect (this bit position is repurposed as an internal memory page-address bit); the datasheet states it may be tied to GND."
      },
      {
        "number": "3",
        "name": "A2",
        "type": "input",
        "description": "Hardware device-address input for HX24C08. Must compare to the A2 bit of the I2C device-address byte; allows up to two 8K devices on one bus."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference (0 V) for the device."
      },
      {
        "number": "5",
        "name": "SDA",
        "type": "bidirectional",
        "description": "I2C serial data (bidirectional, open-drain). Requires an external pull-up resistor; may be wire-OR'd with other open-drain devices on the bus."
      },
      {
        "number": "6",
        "name": "SCL",
        "type": "input",
        "description": "I2C serial clock input. Data is clocked into the EEPROM on the positive edge and out on the negative edge. Max 400 kHz at 1.8V/2.5V/2.7V, 1 MHz at 5V."
      },
      {
        "number": "7",
        "name": "WP",
        "type": "input",
        "description": "Write-Protect input. Tie to GND for normal read/write; tie to VCC to hardware-protect the full 8K array against writes."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage input, 1.7 V to 5.5 V. Typical ICC = 0.4 mA (read @100 kHz), 2.0 mA (write @100 kHz); standby current ≤ 2 µA."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "lcsc": "C5145455",
      "digikey": false,
      "mouser": false
    },
    "distributor_check": {
      "checked_at": "2026-10-05T19:00:55Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "models_3d": [
      {
        "file": "hx24c08drg.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "hx24c08drg-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "011496b129a30a23845df1473cbb12a77e81e88131354ea76d081285d1eb3e85",
        "checked": "2026-11-03",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}