main
Ray
hx24c08drg: laser-etched CAD + chip hero (factory 2.0.0 backfill)
5b2b4d9
HX24C08DRG
HANSCHIP semiconductor · EEPROM · SOP-8
HX24C08DRG from HANSCHIP semiconductor, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | input | Address input. On HX24C08, A0 is a no-connect (device address is decoded only from A2 and internal page bits); the datasheet states it may be tied to GND. |
| 2 | A1 | input | Address input. On HX24C08, A1 is a no-connect (this bit position is repurposed as an internal memory page-address bit); the datasheet states it may be tied to GND. |
| 3 | A2 | input | Hardware device-address input for HX24C08. Must compare to the A2 bit of the I2C device-address byte; allows up to two 8K devices on one bus. |
| 4 | GND | power_in | Ground reference (0 V) for the device. |
| 5 | SDA | bidirectional | I2C serial data (bidirectional, open-drain). Requires an external pull-up resistor; may be wire-OR'd with other open-drain devices on the bus. |
| 6 | SCL | input | I2C serial clock input. Data is clocked into the EEPROM on the positive edge and out on the negative edge. Max 400 kHz at 1.8V/2.5V/2.7V, 1 MHz at 5V. |
| 7 | WP | input | Write-Protect input. Tie to GND for normal read/write; tie to VCC to hardware-protect the full 8K array against writes. |
| 8 | VCC | power_in | Supply voltage input, 1.7 V to 5.5 V. Typical ICC = 0.4 mA (read @100 kHz), 2.0 mA (write @100 kHz); standby current ≤ 2 µA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HANSCHIP semiconductor |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
Ordering variants
HX24C08DRGHX24C08DRGPGHX24C08DRGDGKRGHX24C08DRGDBVRGHX24C08DRGDDFRG
CAD (KiCad official)
- Symbol:
HX24C08DRG - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
hx24c08drg-etched.step/hx24c08drg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hx24c08drg.step/hx24c08drg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HANSCHIP semiconductor datasheet (None pp, sha256
8b39cc16ac1b07de, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HX24C08DRG
**HANSCHIP semiconductor** · EEPROM · SOP-8
HX24C08DRG from HANSCHIP semiconductor, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | input | Address input. On HX24C08, A0 is a no-connect (device address is decoded only from A2 and internal page bits); the datasheet states it may be tied to GND. |
| 2 | A1 | input | Address input. On HX24C08, A1 is a no-connect (this bit position is repurposed as an internal memory page-address bit); the datasheet states it may be tied to GND. |
| 3 | A2 | input | Hardware device-address input for HX24C08. Must compare to the A2 bit of the I2C device-address byte; allows up to two 8K devices on one bus. |
| 4 | GND | power_in | Ground reference (0 V) for the device. |
| 5 | SDA | bidirectional | I2C serial data (bidirectional, open-drain). Requires an external pull-up resistor; may be wire-OR'd with other open-drain devices on the bus. |
| 6 | SCL | input | I2C serial clock input. Data is clocked into the EEPROM on the positive edge and out on the negative edge. Max 400 kHz at 1.8V/2.5V/2.7V, 1 MHz at 5V. |
| 7 | WP | input | Write-Protect input. Tie to GND for normal read/write; tie to VCC to hardware-protect the full 8K array against writes. |
| 8 | VCC | power_in | Supply voltage input, 1.7 V to 5.5 V. Typical ICC = 0.4 mA (read @100 kHz), 2.0 mA (write @100 kHz); standby current ≤ 2 µA. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HANSCHIP semiconductor |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
## Ordering variants
- `HX24C08DRG`
- `HX24C08DRGPG`
- `HX24C08DRGDGKRG`
- `HX24C08DRGDBVRG`
- `HX24C08DRGDDFRG`
## CAD (KiCad official)
- Symbol: `HX24C08DRG`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `hx24c08drg-etched.step` / `hx24c08drg-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hx24c08drg.step` / `hx24c08drg.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HANSCHIP semiconductor datasheet](docs/hx24c08drg-datasheet.pdf) (None pp, sha256 `8b39cc16ac1b07de`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hx24c08drg-datasheet.pdf)