main
Ray
hx24c02p: laser-etched CAD + chip hero (factory 2.0.0 backfill)
cb5fd9d
HX24C02P
HX hengjiaxing · EEPROM · SOP-8
HX24C02P from HX hengjiaxing, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | input | Device address input bit 0. Tied high or low to set the least significant bit of the 3-bit hardware slave address (I2C address = 1010_A2A1A0). Allows up to 8 HX24C02 devices to share one I2C bus. |
| 2 | A1 | input | Device address input bit 1. Tied high or low to set the middle bit of the 3-bit hardware slave address (I2C address = 1010_A2A1A0). |
| 3 | A2 | input | Device address input bit 2. Tied high or low to set the most significant bit of the 3-bit hardware slave address (I2C address = 1010_A2A1A0). |
| 4 | GND | power_in | Ground / negative supply return. Reference for all voltages. |
| 5 | SDA | bidirectional | I2C serial data line. Open-drain bidirectional data pin; requires an external pull-up resistor (typ. 10 kΩ) to VCC. Data on SDA may only change while SCL is low. |
| 6 | SCL | input | I2C serial clock input. Driven by the bus master; requires an external pull-up resistor (typ. 10 kΩ) to VCC. Max frequency 1 MHz at VCC=5V (400 kHz at 1.8V). |
| 7 | WP | input | Write protect input. When tied high (VCC), write operations to the entire memory array are inhibited (hardware write protection); when tied low (GND), normal read/write operations are allowed. |
| 8 | VCC | power_in | Positive supply voltage. Operating range 1.8V to 5.5V; absolute maximum 5.5V. Bypass with a 1 µF ceramic capacitor close to the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HX hengjiaxing |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
Ordering variants
HX24C02PPHX24C02PDHX24C02PS
CAD (KiCad official)
- Symbol:
HX24C02P - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
hx24c02p-etched.step/hx24c02p-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hx24c02p.step/hx24c02p.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HX hengjiaxing datasheet (None pp, sha256
cc8112afa8214613, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HX24C02P
**HX hengjiaxing** · EEPROM · SOP-8
HX24C02P from HX hengjiaxing, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | input | Device address input bit 0. Tied high or low to set the least significant bit of the 3-bit hardware slave address (I2C address = 1010_A2A1A0). Allows up to 8 HX24C02 devices to share one I2C bus. |
| 2 | A1 | input | Device address input bit 1. Tied high or low to set the middle bit of the 3-bit hardware slave address (I2C address = 1010_A2A1A0). |
| 3 | A2 | input | Device address input bit 2. Tied high or low to set the most significant bit of the 3-bit hardware slave address (I2C address = 1010_A2A1A0). |
| 4 | GND | power_in | Ground / negative supply return. Reference for all voltages. |
| 5 | SDA | bidirectional | I2C serial data line. Open-drain bidirectional data pin; requires an external pull-up resistor (typ. 10 kΩ) to VCC. Data on SDA may only change while SCL is low. |
| 6 | SCL | input | I2C serial clock input. Driven by the bus master; requires an external pull-up resistor (typ. 10 kΩ) to VCC. Max frequency 1 MHz at VCC=5V (400 kHz at 1.8V). |
| 7 | WP | input | Write protect input. When tied high (VCC), write operations to the entire memory array are inhibited (hardware write protection); when tied low (GND), normal read/write operations are allowed. |
| 8 | VCC | power_in | Positive supply voltage. Operating range 1.8V to 5.5V; absolute maximum 5.5V. Bypass with a 1 µF ceramic capacitor close to the pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HX hengjiaxing |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
## Ordering variants
- `HX24C02PP`
- `HX24C02PD`
- `HX24C02PS`
## CAD (KiCad official)
- Symbol: `HX24C02P`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `hx24c02p-etched.step` / `hx24c02p-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hx24c02p.step` / `hx24c02p.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HX hengjiaxing datasheet](docs/hx24c02p-datasheet.pdf) (None pp, sha256 `cc8112afa8214613`, retrieved 2026-08-17, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hx24c02p-datasheet.pdf)