main
Ray
Publish 0.1.0
ce7853f
HX232EIDRG
HANSCHIP semiconductor · RS232 ICs · SOP-16
HX232EIDRG from HANSCHIP semiconductor, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Output of external capacitance of the positive voltage multiplier unit; connects to the external charge-pump capacitor. |
| 2 | V+ | power_out | Output of positive voltage of the multiplier unit; transmitter high output voltage is specified at 5.0 V minimum. |
| 3 | C1- | passive | Output of external capacitance of the positive voltage multiplier unit; connects to the external charge-pump capacitor. |
| 4 | C2+ | passive | Output of external capacitance of the negative voltage multiplier unit; connects to the external charge-pump capacitor. |
| 5 | C2- | passive | Output of external capacitance of the negative voltage multiplier unit; connects to the external charge-pump capacitor. |
| 6 | V- | power_out | Output of negative voltage of the multiplier unit; transmitter low output voltage is specified at -5.0 V maximum. |
| 7 | T2OUT | output | Transmitter data output at RS-232 levels; short-circuit output current is limited to ±60 mA. |
| 8 | R2IN | input | Receiver data input at RS-232 levels; receiver input voltage range is -30 V to 30 V. |
| 9 | R2OUT | output | Receiver data output at TTL/CMOS levels, inverting the RS-232 input (high on R2IN gives low on R2OUT). |
| 10 | T2IN | input | Transmitter data input at TTL/CMOS levels; transmitter input voltage range is 0 V to VCC. |
| 11 | T1IN | input | Transmitter data input at TTL/CMOS levels; transmitter input voltage range is 0 V to VCC. |
| 12 | R1OUT | output | Receiver data output at TTL/CMOS levels, inverting the RS-232 input (high on R1IN gives low on R1OUT). |
| 13 | R1IN | input | Receiver data input at RS-232 levels; receiver input voltage range is -30 V to 30 V. |
| 14 | T1OUT | output | Transmitter data output at RS-232 levels; short-circuit output current is limited to ±60 mA. |
| 15 | GND | power_in | Common ground reference for the device. |
| 16 | VCC | power_in | Supply voltage input; recommended range is 4.5 V to 5.5 V and absolute maximum is 6.0 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HANSCHIP semiconductor |
| Package | SOP-16 |
| Category | Interface |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | -0.3 | 6 | V | 3 | ||
| Transmitter high output voltage | V+ | 14 | V | 3 | |||
| Transmitter low output voltage | V- | -0.3 | -14 | V | 3 | ||
| Transmitter input voltage | VTIN | -0.3 | V | 3 | |||
| Receiver input voltage | VRIN | -30 | 30 | V | 3 | ||
| Dissipated power | PD | 762 | mW | SOP package | 3 | ||
| Ambient temperature | Ta | -60 | 150 | ℃ | 3 | ||
| Lead temperature | TL | 245 | ℃ | Soldering, 10 seconds | 3 | ||
| Supply voltage | VCC | 4.5 | 5.5 | V | 3 | ||
| Transmitter output high voltage | V+ | 5 | V | 3 | |||
| Transmitter output low voltage | V- | -5 | V | 3 | |||
| Transmitter input voltage | VTIN | 0 | V | 3 | |||
| Receiver input voltage | VRIN | -30 | 30 | V | 3 | ||
| Transmitter short circuit output current | ISC | -60 | 60 | mA | 3 | ||
| Ambient temperature | Ta | -40 | 85 | ℃ | 3 | ||
| Consumption current static | ICC | 10 | mA | 25℃; VCC =5.5 V, VIL = 0 V | 5 | ||
| Consumption current static | ICC | 14 | mA | -40℃ to 85℃; VCC =5.5 V, VIL = 0 V | 5 | ||
| Hysteresis voltage | Vh | 0.2 | 0.9 | V | 25℃; VCC =5.0 V | 5 | |
| Hysteresis voltage | Vh | 0.2 | 1 | V | -40℃ to 85℃; VCC =5.0 V | 5 | |
| On (operation) voltage | VOn | 2.4 | V | 25℃; VO≦0.1 V, IOL≦20 mkA | 5 | ||
| On (operation) voltage | VOn | 2.3 | V | -40℃ to 85℃; VO≦0.1 V, IOL≦20 mkA | 5 | ||
| Off (dropout) voltage | Voff | 0.8 | V | 25℃; VO ≧VCC -0.1 V, IOH ≦-20 mkA | 5 | ||
| Off (dropout) voltage | Voff | 0.9 | V | -40℃ to 85℃; VO ≧VCC -0.1 V, IOH ≦-20 mkA | 5 | ||
| Receiver output low voltage | VOL | 0.3 | V | 25℃; IOL = 3.2 mA, VCC = 4.5 V, VIH = 2.4 V | 5 | ||
| Receiver output low voltage | VOL | 0.4 | V | -40℃ to 85℃; IOL = 3.2 mA, VCC = 4.5 V, VIH = 2.4 V | 5 | ||
| Receiver output high voltage | VOH | 3.6 | V | 25℃; IOH = -1.0 mA, VCC = 4.5 V, VIL = 0.8 V | 5 | ||
| Receiver output high voltage | VOH | 3.5 | V | -40℃ to 85℃; IOH = -1.0 mA, VCC = 4.5 V, VIL = 0.8 V | 5 | ||
| Input resistance | RI | 3 | 7 | kOhm | 25℃; VCC = 5.0 V | 5 | |
| Transmitter output low voltage | VOL | -5.2 | V | 25℃; VCC = 4.5 V, VIH = 2.0 V, RL = 3.0 kOhm | 5 | ||
| Transmitter output low voltage | VOL | -5 | V | -40℃ to 85℃; VCC = 4.5 V, VIH = 2.0 V, RL = 3.0 kOhm | 5 | ||
| Transmitter output high voltage | VOH | 5.2 | V | 25℃; VCC = 4.5 V, VIL = 0.8 V, RL = 3.0 kOhm | 5 | ||
| Transmitter output high voltage | VOH | 5 | V | -40℃ to 85℃; VCC = 4.5 V, VIL = 0.8 V, RL = 3.0 kOhm | 5 | ||
| Input low current | IIL | -1 | mkA | 25℃; VCC =5.5 V, VIL = 0 V | 5 | ||
| Input low current | IIL | -10 | mkA | -40℃ to 85℃; VCC =5.5 V, VIL = 0 V | 5 | ||
| Input high current | IIH | 1 | 10 | mkA | VCC =5.5 V, VIH = VCC | 5 | |
| Speed of output front change | SR | 3 | 30 | V/mks | 25℃; VCC =5.0 V, CL =50 - 1000 pF, RL = 3.0 - 7.0 kOhm | 5 | |
| Speed of output front change | SR | 2.7 | 27 | V/mks | -40℃ to 85℃; VCC =5.0 V, CL =50 - 1000 pF, RL = 3.0 - 7.0 kOhm | 5 | |
| Output resistance | RO | 350 | Ohm | 25℃; VCC = V+ = V- = 0V, VO = 2 V | 5 | ||
| Output resistance | RO | 300 | Ohm | -40℃ to 85℃; VCC = V+ = V- = 0V, VO = 2 V | 5 | ||
| Short circuit output current | ISC | -50 | 50 | mA | 25℃; VCC =5.5 V, VO = 0V, VI = VCC VI = 0V | 5 | |
| Short circuit output current | ISC | -60 | 60 | mA | -40℃ to 85℃; VCC =5.5 V, VO = 0V, VI = VCC VI = 0V | 5 | |
| Speed of information transmission | ST | 140 | kbit/с | 25℃; VCC =4.5 V, CL = 1000pF, RL = 3.0 kOhm, tW = 7mks (for extreme -tW = 8mks) | 5 | ||
| Speed of information transmission | ST | 120 | kbit/с | -40℃ to 85℃; VCC =4.5 V, CL = 1000pF, RL = 3.0 kOhm, tW = 7mks (for extreme -tW = 8mks) | 5 | ||
| Signal propagation delay time when switching on (off) | tPHLR (tPLHR) | 9.7 | mks | 25℃; VCC = 4.5 V, CL = 150 pF, VIL = 0 V, VIH = 3.0 V, tLH = tHL≦10 ns | 6 | ||
| Signal propagation delay time when switching on (off) | tPHLR (tPLHR) | 10 | mks | -40℃ to 85℃; VCC = 4.5 V, CL = 150 pF, VIL = 0 V, VIH = 3.0 V, tLH = tHL≦10 ns | 6 | ||
| Signal propagation delay time when switching on (off) | tPHLT (tPLHT) | 5 | mks | 25℃; VCC = 4.5 V, CL = 2500 pF, VIL = 0 V, VIH = 3.0 V, RL = 3 kOhm, tLH = tHL≦10 ns | 6 | ||
| Signal propagation delay time when switching on (off) | tPHLT (tPLHT) | 6 | mks | -40℃ to 85℃; VCC = 4.5 V, CL = 2500 pF, VIL = 0 V, VIH = 3.0 V, RL = 3 kOhm, tLH = tHL≦10 ns | 6 | ||
| Input capacitance | CIN | 9 | pF | VCC = 5.0 V | 6 | ||
| Dynamic capacitance | CPD | 90 | pF | 6 |
CAD (KiCad official)
- Symbol:
HX232EIDRG - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files:
hx232eidrg-etched.step/hx232eidrg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hx232eidrg.step/hx232eidrg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HANSCHIP semiconductor datasheet (11 pp, sha256
3c7e7120eb8ee705, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HX232EIDRG
**HANSCHIP semiconductor** · RS232 ICs · SOP-16
HX232EIDRG from HANSCHIP semiconductor, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Output of external capacitance of the positive voltage multiplier unit; connects to the external charge-pump capacitor. |
| 2 | V+ | power_out | Output of positive voltage of the multiplier unit; transmitter high output voltage is specified at 5.0 V minimum. |
| 3 | C1- | passive | Output of external capacitance of the positive voltage multiplier unit; connects to the external charge-pump capacitor. |
| 4 | C2+ | passive | Output of external capacitance of the negative voltage multiplier unit; connects to the external charge-pump capacitor. |
| 5 | C2- | passive | Output of external capacitance of the negative voltage multiplier unit; connects to the external charge-pump capacitor. |
| 6 | V- | power_out | Output of negative voltage of the multiplier unit; transmitter low output voltage is specified at -5.0 V maximum. |
| 7 | T2OUT | output | Transmitter data output at RS-232 levels; short-circuit output current is limited to ±60 mA. |
| 8 | R2IN | input | Receiver data input at RS-232 levels; receiver input voltage range is -30 V to 30 V. |
| 9 | R2OUT | output | Receiver data output at TTL/CMOS levels, inverting the RS-232 input (high on R2IN gives low on R2OUT). |
| 10 | T2IN | input | Transmitter data input at TTL/CMOS levels; transmitter input voltage range is 0 V to VCC. |
| 11 | T1IN | input | Transmitter data input at TTL/CMOS levels; transmitter input voltage range is 0 V to VCC. |
| 12 | R1OUT | output | Receiver data output at TTL/CMOS levels, inverting the RS-232 input (high on R1IN gives low on R1OUT). |
| 13 | R1IN | input | Receiver data input at RS-232 levels; receiver input voltage range is -30 V to 30 V. |
| 14 | T1OUT | output | Transmitter data output at RS-232 levels; short-circuit output current is limited to ±60 mA. |
| 15 | GND | power_in | Common ground reference for the device. |
| 16 | VCC | power_in | Supply voltage input; recommended range is 4.5 V to 5.5 V and absolute maximum is 6.0 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HANSCHIP semiconductor |
| Package | SOP-16 |
| Category | Interface |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | -0.3 | | 6 | V | | 3 |
| Transmitter high output voltage | V+ | | | 14 | V | | 3 |
| Transmitter low output voltage | V- | -0.3 | | -14 | V | | 3 |
| Transmitter input voltage | VTIN | -0.3 | | | V | | 3 |
| Receiver input voltage | VRIN | -30 | | 30 | V | | 3 |
| Dissipated power | PD | | | 762 | mW | SOP package | 3 |
| Ambient temperature | Ta | -60 | | 150 | ℃ | | 3 |
| Lead temperature | TL | | | 245 | ℃ | Soldering, 10 seconds | 3 |
| Supply voltage | VCC | 4.5 | | 5.5 | V | | 3 |
| Transmitter output high voltage | V+ | 5 | | | V | | 3 |
| Transmitter output low voltage | V- | -5 | | | V | | 3 |
| Transmitter input voltage | VTIN | 0 | | | V | | 3 |
| Receiver input voltage | VRIN | -30 | | 30 | V | | 3 |
| Transmitter short circuit output current | ISC | -60 | | 60 | mA | | 3 |
| Ambient temperature | Ta | -40 | | 85 | ℃ | | 3 |
| Consumption current static | ICC | | | 10 | mA | 25℃; VCC =5.5 V, VIL = 0 V | 5 |
| Consumption current static | ICC | | | 14 | mA | -40℃ to 85℃; VCC =5.5 V, VIL = 0 V | 5 |
| Hysteresis voltage | Vh | 0.2 | | 0.9 | V | 25℃; VCC =5.0 V | 5 |
| Hysteresis voltage | Vh | 0.2 | | 1 | V | -40℃ to 85℃; VCC =5.0 V | 5 |
| On (operation) voltage | VOn | | | 2.4 | V | 25℃; VO≦0.1 V, IOL≦20 mkA | 5 |
| On (operation) voltage | VOn | | | 2.3 | V | -40℃ to 85℃; VO≦0.1 V, IOL≦20 mkA | 5 |
| Off (dropout) voltage | Voff | 0.8 | | | V | 25℃; VO ≧VCC -0.1 V, IOH ≦-20 mkA | 5 |
| Off (dropout) voltage | Voff | 0.9 | | | V | -40℃ to 85℃; VO ≧VCC -0.1 V, IOH ≦-20 mkA | 5 |
| Receiver output low voltage | VOL | | | 0.3 | V | 25℃; IOL = 3.2 mA, VCC = 4.5 V, VIH = 2.4 V | 5 |
| Receiver output low voltage | VOL | | | 0.4 | V | -40℃ to 85℃; IOL = 3.2 mA, VCC = 4.5 V, VIH = 2.4 V | 5 |
| Receiver output high voltage | VOH | 3.6 | | | V | 25℃; IOH = -1.0 mA, VCC = 4.5 V, VIL = 0.8 V | 5 |
| Receiver output high voltage | VOH | 3.5 | | | V | -40℃ to 85℃; IOH = -1.0 mA, VCC = 4.5 V, VIL = 0.8 V | 5 |
| Input resistance | RI | 3 | | 7 | kOhm | 25℃; VCC = 5.0 V | 5 |
| Transmitter output low voltage | VOL | | | -5.2 | V | 25℃; VCC = 4.5 V, VIH = 2.0 V, RL = 3.0 kOhm | 5 |
| Transmitter output low voltage | VOL | | | -5 | V | -40℃ to 85℃; VCC = 4.5 V, VIH = 2.0 V, RL = 3.0 kOhm | 5 |
| Transmitter output high voltage | VOH | 5.2 | | | V | 25℃; VCC = 4.5 V, VIL = 0.8 V, RL = 3.0 kOhm | 5 |
| Transmitter output high voltage | VOH | 5 | | | V | -40℃ to 85℃; VCC = 4.5 V, VIL = 0.8 V, RL = 3.0 kOhm | 5 |
| Input low current | IIL | | | -1 | mkA | 25℃; VCC =5.5 V, VIL = 0 V | 5 |
| Input low current | IIL | | | -10 | mkA | -40℃ to 85℃; VCC =5.5 V, VIL = 0 V | 5 |
| Input high current | IIH | 1 | | 10 | mkA | VCC =5.5 V, VIH = VCC | 5 |
| Speed of output front change | SR | 3 | | 30 | V/mks | 25℃; VCC =5.0 V, CL =50 - 1000 pF, RL = 3.0 - 7.0 kOhm | 5 |
| Speed of output front change | SR | 2.7 | | 27 | V/mks | -40℃ to 85℃; VCC =5.0 V, CL =50 - 1000 pF, RL = 3.0 - 7.0 kOhm | 5 |
| Output resistance | RO | 350 | | | Ohm | 25℃; VCC = V+ = V- = 0V, VO = 2 V | 5 |
| Output resistance | RO | 300 | | | Ohm | -40℃ to 85℃; VCC = V+ = V- = 0V, VO = 2 V | 5 |
| Short circuit output current | ISC | -50 | | 50 | mA | 25℃; VCC =5.5 V, VO = 0V, VI = VCC VI = 0V | 5 |
| Short circuit output current | ISC | -60 | | 60 | mA | -40℃ to 85℃; VCC =5.5 V, VO = 0V, VI = VCC VI = 0V | 5 |
| Speed of information transmission | ST | 140 | | | kbit/с | 25℃; VCC =4.5 V, CL = 1000pF, RL = 3.0 kOhm, tW = 7mks (for extreme -tW = 8mks) | 5 |
| Speed of information transmission | ST | 120 | | | kbit/с | -40℃ to 85℃; VCC =4.5 V, CL = 1000pF, RL = 3.0 kOhm, tW = 7mks (for extreme -tW = 8mks) | 5 |
| Signal propagation delay time when switching on (off) | tPHLR (tPLHR) | | | 9.7 | mks | 25℃; VCC = 4.5 V, CL = 150 pF, VIL = 0 V, VIH = 3.0 V, tLH = tHL≦10 ns | 6 |
| Signal propagation delay time when switching on (off) | tPHLR (tPLHR) | | | 10 | mks | -40℃ to 85℃; VCC = 4.5 V, CL = 150 pF, VIL = 0 V, VIH = 3.0 V, tLH = tHL≦10 ns | 6 |
| Signal propagation delay time when switching on (off) | tPHLT (tPLHT) | | | 5 | mks | 25℃; VCC = 4.5 V, CL = 2500 pF, VIL = 0 V, VIH = 3.0 V, RL = 3 kOhm, tLH = tHL≦10 ns | 6 |
| Signal propagation delay time when switching on (off) | tPHLT (tPLHT) | | | 6 | mks | -40℃ to 85℃; VCC = 4.5 V, CL = 2500 pF, VIL = 0 V, VIH = 3.0 V, RL = 3 kOhm, tLH = tHL≦10 ns | 6 |
| Input capacitance | CIN | | 9 | | pF | VCC = 5.0 V | 6 |
| Dynamic capacitance | CPD | | 90 | | pF | | 6 |
## CAD (KiCad official)
- Symbol: `HX232EIDRG`
- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`
- 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files: `hx232eidrg-etched.step` / `hx232eidrg-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hx232eidrg.step` / `hx232eidrg.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HANSCHIP semiconductor datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590921482170421248) (11 pp, sha256 `3c7e7120eb8ee705`, retrieved 2026-10-19, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hx232eidrg-datasheet.pdf)