component
HX084A-S
Public Made by Adomby adom
ZHHXDZ Operational Amplifier, SOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHX084A-S
ZHHXDZ · Operational Amplifier · SOP-14
HX084A-S from ZHHXDZ, in a SOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Output of amplifier 1. |
| 2 | IN1(-) | input | Inverting input of amplifier 1; input common-mode range -0.3V to 32V. |
| 3 | IN1(+) | input | Non-inverting input of amplifier 1; input common-mode range -0.3V to 32V. |
| 4 | VCC | power_in | Positive supply, 3V to 32V single supply (or ±1.5V to ±16V split); recommended 5.0V to 30V. |
| 5 | IN2(+) | input | Non-inverting input of amplifier 2; input common-mode range -0.3V to 32V. |
| 6 | IN2(-) | input | Inverting input of amplifier 2; input common-mode range -0.3V to 32V. |
| 7 | OUT2 | output | Output of amplifier 2. |
| 8 | OUT3 | output | Output of amplifier 3. |
| 9 | IN3(-) | input | Inverting input of amplifier 3; input common-mode range -0.3V to 32V. |
| 10 | IN3(+) | input | Non-inverting input of amplifier 3; input common-mode range -0.3V to 32V. |
| 11 | GND | power_in | Ground / negative supply (V- when split supplies are used). |
| 12 | IN4(+) | input | Non-inverting input of amplifier 4; input common-mode range -0.3V to 32V. |
| 13 | IN4(-) | input | Inverting input of amplifier 4; input common-mode range -0.3V to 32V. |
| 14 | OUT4 | output | Output of amplifier 4. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ZHHXDZ |
| Package | SOP-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| DC Supply Voltage (recommended) | VCC | 5 | 30 | V | Single supply; split supply printed as ±2.5 or 5.0 (min) and ±15 or 30 (max) | 1 | |
| Operating Temperature, All Package Types (recommended) | TA | -40 | 105 | °C | 1 | ||
| Power Supply Voltages (absolute maximum) | VCC | 32 | V | Single supply; split supplies ±16 V | 2 | ||
| Input Differential Voltage Range (absolute maximum) | VIDR | 32 | V | Printed as ±32 V | 2 | ||
| Input Common Mode Voltage Range (absolute maximum) | VICR | -0.3 | 32 | V | 2 | ||
| Input Current, per pin (absolute maximum) | IIN | 50 | mA | Per pin; applies when input voltage is driven below -0.3 V | 2 | ||
| Junction Temperature (absolute maximum) | TJ | 150 | °C | 2 | |||
| Storage Temperature, Plastic Packages (absolute maximum) | Tstg | -55 | 125 | °C | Plastic packages | 2 | |
| Lead Temperature (absolute maximum) | TL | 260 | °C | 1 mm from case for 10 seconds | 2 | ||
| Maximum Input Offset Voltage | VIO | 7 | mV | VO=1.4V, VCC=5.0V | 2 | ||
| Input Offset Voltage drift | ΔVIO/ΔT | 7 | μV/C | RS=0Ω, VCC=30V | 2 | ||
| Maximum Input Offset Current | IIO | 150 | nA | VCC=5.0V | 2 | ||
| Maximum Input Bias Current | IIB | 500 | nA | VCC=5.0V | 2 | ||
| Input Common Mode Voltage Range | VICR | 0 | 28 | V | VCC=30V | 2 | |
| Maximum Power Supply Current | ICC | 3 | mA | RL=, VCC=30V, V0=0V | 2 | ||
| Maximum Power Supply Current | ICC | 1.2 | mA | RL=, VCC=5V, V0=0V | 2 | ||
| Minimum Large Signal Open-Loop Voltage Gain | AVOL | 15 | 25 | V/mV | VCC=15V, RL≥2KΩ (printed RL2KΩ); typ value at 25°C (footnote a) | 2 | |
| Minimum Output High-Level Voltage Swing | VOH | 26 | V | VCC=30V, RL=2KΩ | 2 | ||
| Minimum Output High-Level Voltage Swing | VOH | 27 | V | VCC=30V, RL=10KΩ | 2 | ||
| Maximum Output Low-Level Voltage | VOL | 20 | mV | VCC=5V, RL=10KΩ | 2 | ||
| Common Mode Rejection | CMR | 65 | dB | VCC=30V, RS=10KΩ; footnote a (@25°C) | 2 | ||
| Power Supply Rejection | PSR | 65 | dB | VCC=30V | 2 | ||
| Channel Separation | CS | -120 | dB | f=1KHz to 20KHz, VCC=30V; footnote a (@25°C) | 2 | ||
| Maximum Output Short Circuit to GND | ISC | 60 | mA | VCC=5.0V; footnote a (@25°C) | 2 | ||
| Minimum Output Source Current | Isource | 20 | 50 | mA | VIN+=1V, VIN-=0V | 2 | |
| Minimum Output Sink Current | Isink | 5 | mA | VIN+=0V, VIN-=1V | 2 |
CAD (KiCad official)
- Symbol:
HX084A-S - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOP-14 (KiCad packages3D, STEP)
- 3D model files:
hx084a-s-etched.step/hx084a-s-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hx084a-s.step/hx084a-s.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ZHHXDZ datasheet (5 pp, sha256
c46d64e1cbaa54fb, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).