component

HX082A-P

Public Made by Adom

by adom

ZHHXDZ Operational Amplifier, DIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentamplifiers-comparatorshx082a-pfactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Datasheet

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

HX082A-P

ZHHXDZ · Operational Amplifier · DIP-8

HX082A-P from ZHHXDZ, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT1 output Output of amplifier 1.
2 IN1(-) input Inverting input of amplifier 1.
3 IN1(+) input Non-inverting input of amplifier 1.
4 GND power_in Ground / negative supply; supply range is 3V to 32V single or ±1.5V to ±16V split.
5 IN2(+) input Non-inverting input of amplifier 2.
6 IN2(-) input Inverting input of amplifier 2.
7 OUT2 output Output of amplifier 2.
8 VCC power_in Positive supply voltage, 3V to 32V (or ±1.5V to ±16V); absolute maximum 32V single supply.

Key specifications

Parameter Value
Manufacturer ZHHXDZ
Package DIP-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Maximum Input Offset Voltage VIO 9 mV VO=1.4V, VCC=5.0-30V, RS=0Ω, VICM=0V to VCC-1.7V; TA=0 to +70°C 2
Maximum Input Offset Current IIO 150 nA VCC=5.0V; TA=0 to +70°C 2
Maximum Input Bias Current IIB -500 nA VCC=5.0V; TA=0 to +70°C 2
Input Offset Current Drift ΔIIO/ΔT 10 pA/°C RS=0Ω, VCC=30V; TA=0 to +70°C 2
Input Offset Voltage Drift ΔVIO/ΔT 7 μV/°C RS=0Ω, VCC=30V; TA=0 to +70°C 2
Input Common Mode Voltage Range VICR 0 28 V VCC=30V; TA=0 to +70°C 2
Maximum Power Supply Current ICC 3 mA RL=…, VCC=30V, V0=0V; RL=…, VCC=5V, V0=0V; TA=0 to +70°C 2
Minimum Large Signal Open-Loop Voltage Gain AVOL 15 V/mV VCC=15V, RL≥2KΩ; TA=0 to +70°C 2
Minimum Output High-Level Voltage Swing VOH 26 V VCC=30V, RL=2KΩ; TA=0 to +70°C 2
Minimum Output High-Level Voltage Swing VOH 27 V VCC=30V, RL=10KΩ; TA=0 to +70°C 2
Maximum Output Low-Level Voltage Swing VOL 20 mV VCC=5V, RL=10KΩ; TA=0 to +70°C 2
Common Mode Rejection CMR 65 dB VCC=30V, RS=10KΩ; @25°C 2
Power Supply Rejection PSR 65 dB VCC=30V; TA=0 to +70°C 2
Channel Separation CS -120 dB f=1KHz to 20KHz, VCC=30V; @25°C 2
Maximum Output Short Circuit to GND ISC 60 mA VCC=5.0V; TA=0 to +70°C 2
Minimum Source Output Current Isource 10 mA VIN+=1V, VIN-=0V, VCC=15V, V0=0V; TA=0 to +70°C 2
Minimum Output Sink Current Isink 5 mA VIN+=0V, VIN-=1V, VCC=15V, V0=15V; TA=0 to +70°C 2
Minimum Output Sink Current Isink 12 μA VIN+=0V, VIN-=1V, VCC=15V, V0=0.2V; @25°C 2
Power Supply Voltage (single supply) VCC 32 V Single supply 2
Power Supply Voltage (split supply) VCC 16 V Split supply, ±16 V as printed 2
Input Differential Voltage Range VIDR 32 V Printed ±32 V; note a: split power supplies 2
Input Common Mode Voltage Range VICR -0.3 32 V Printed -0.3 to 32 V 2
Junction Temperature TJ 150 °C 2
Storage Temperature Tstg -55 125 °C Printed -55 to +125 °C 2
Input Current, per pin IIN 50 mA Note b: VIN<-0.3V 2
Lead Temperature TL 260 °C 1mm from case for 10 seconds 2
DC Supply Voltage VCC 2.5 30 V Printed min ±2.5 or 5.0; max ±15 or 30 (split or single supply) 1
Operating Temperature, All Package Types TA 0 70 °C Printed for all package types; product table lists HX082A-P at -40°C~85°C (see review) 1

CAD (KiCad official)

  • Symbol: HX082A-P
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: DIP-8 (KiCad packages3D, STEP)
  • 3D model files: hx082a-p-etched.step / hx082a-p-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hx082a-p.step / hx082a-p.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: ZHHXDZ datasheet (5 pp, sha256 b03677d615ea166f, retrieved 2026-10-13, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF