component

HX074-S

Public Made by Adom

by adom

ZHHXDZ Operational Amplifier, SOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentamplifiers-comparatorshx074-sfactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Datasheet

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

HX074-S

ZHHXDZ · Operational Amplifier · SOP-14

HX074-S from ZHHXDZ, in a SOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT1 output Output of amplifier 1.
2 IN1(-) input Inverting input of amplifier 1; input common-mode range -0.3 V to 32 V.
3 IN1(+) input Non-inverting input of amplifier 1; input common-mode range -0.3 V to 32 V.
4 VCC power_in Positive supply, 3 V to 32 V single supply (or ±1.5 V to ±16 V split), absolute maximum 32 V.
5 IN2(+) input Non-inverting input of amplifier 2; input common-mode range -0.3 V to 32 V.
6 IN2(-) input Inverting input of amplifier 2; input common-mode range -0.3 V to 32 V.
7 OUT2 output Output of amplifier 2.
8 OUT3 output Output of amplifier 3.
9 IN3(-) input Inverting input of amplifier 3; input common-mode range -0.3 V to 32 V.
10 IN3(+) input Non-inverting input of amplifier 3; input common-mode range -0.3 V to 32 V.
11 GND power_in Ground / negative supply (V- when split supplies are used).
12 IN4(+) input Non-inverting input of amplifier 4; input common-mode range -0.3 V to 32 V.
13 IN4(-) input Inverting input of amplifier 4; input common-mode range -0.3 V to 32 V.
14 OUT4 output Output of amplifier 4.

Key specifications

Parameter Value
Manufacturer ZHHXDZ
Package SOP-14
Category Amplifiers/Comparators
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Maximum Input Offset Voltage VIO 7 mV VO=1.4V VCC=5.0- 2
Input Offset Voltage drift ΔVIO/ΔT 7 μV/C RS=0Ω, VCC=30V 2
Maximum Input Offset Current IIO 150 nA VCC=5.0V 2
Input Offset Current Drift ΔIIO/ΔT 10 pA/C RS=0Ω, VCC=30V 2
Maximum Input Bias Current IIB 500 nA VCC=5.0V 2
Input Common Mode Voltage Range VICR 0 28 V VCC=30V 2
Maximum Power Supply Current ICC 3 mA RL=,VCC=30V,V0=0V 2
Maximum Power Supply Current ICC 1.2 mA RL=,VCC=5V,V0=0V 2
Minimum Large Signal Open-Loop Voltage Gain AVOL 15 25 V/mV VCC=15V, RL2KΩ 2
Minimum Output High-Level Voltage Swing VOH 26 V VCC=30V,RL=2KΩ 2
Minimum Output High-Level Voltage Swing VOH 27 V VCC=30V,RL=10KΩ 2
Maximum Output Low-Level Voltage VOL 20 mV VCC=5V,RL=10KΩ 2
Maximum Output Short Circuit to GND ISC 60 mA VCC=5.0V 2
Minimum Output Source Current Isource 20 mA VIN+=1V, VIN-=0V 2
Minimum Output Sink Current Isink 5 mA VIN+=0V, VIN-=1V 2
DC Supply Voltage (operating temperature range) TA -40 105 °C All Package Types 1
Power Supply Voltages, single supply VCC 32 V Single Supply 2
Power Supply Voltages, split supplies VCC -16 16 V Split Supplies 2
Input Differential Voltage Range VIDR -32 32 V 2
Input Common Mode Voltage Range VICR -0.3 32 V 2
Junction Temperature TJ 150 °C 2
Storage Temperature Tstg -55 125 °C Plastic Packages 2
Input Current, per pin IIN 50 mA Per pin; note b: VIN<-0.3V 2
Lead Temperature TL 260 °C 1mm from case for 10 seconds 2

CAD (KiCad official)

  • Symbol: HX074-S
  • Footprint: Package_SO:SOIC-14_3.9x8.7mm_P1.27mm
  • 3D model: SOP-14 (KiCad packages3D, STEP)
  • 3D model files: hx074-s-etched.step / hx074-s-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hx074-s.step / hx074-s.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: ZHHXDZ datasheet (5 pp, sha256 bdaaa7e8bfa9923f, retrieved 2026-10-18, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF