component
HVLED001A
Public Made by Adomby adom
STMicroelectronics LED Drivers, SOP-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+46@@ -0,0 +1,46 @@+# HVLED001A++**STMicroelectronics** · LED Drivers · SOP-10++HVLED001A from STMicroelectronics, in a SOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | HVSU | input | High-voltage startup and input-voltage sense pin, rated to withstand 800 V, intended to be tied to the input voltage through a low-value resistor (1 k typ.). |+| 2 | N.C. | unconnected | Not connected pin. |+| 3 | TOFF | input | Applying a voltage to this pin sets the zero-voltage-detection blanking time, leaving it unconnected gives the minimum blanking time, with an operating voltage of 0 to 3.3 V and a maximum applied voltage of 7 V. |+| 4 | FB | input | Loop-regulation input driven directly by the optocoupler phototransistor and/or connected to the primary-side regulation compensation network, with an absolute maximum voltage of -0.3 V to 3.6 V. |+| 5 | CTRL | input | Disables the IC and generates the soft-start ramp, with a maximum injected current of 1 mA and an absolute maximum voltage of -0.3 V to VCC in stop mode. |+| 6 | ZCD | input | Multi-function pin for zero-current detection, primary-side output-voltage sensing and input-voltage brownout sensing, with a negative source current limited to 1 mA and a maximum pin voltage of 7 V. |+| 7 | CS | input | Input to the current-sense comparator for power regulation, with an applied voltage of -0.3 V to 7 V, where a second-level overcurrent (OCP) threshold detects abnormal currents. |+| 8 | GND | power_in | Reference ground pin for the IC; bulk and high-frequency VCC capacitors return to this pin. |+| 9 | GD | output | Gate driver output able to drive power MOSFET and IGBT gates, with a maximum swing from -0.3 V up to VCC. |+| 10 | VCC | power_in | IC supply pin with internal UVLO, absolute maximum supply voltage of 18 V, requiring a bulk capacitor (around 10 µF) and a 100 nF ceramic capacitor to GND. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | SOP-10 |+| Category | LED Drivers |+| Pins | 10 |++## CAD (KiCad official)++- Symbol: `HVLED001A`+- Footprint: `Package_SO:SOIC-10_3.9x4.9mm_P1mm`+- 3D model: SOP-10, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.75 mm nominal SOIC height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)+- 3D model files: `hvled001a-etched.step` / `hvled001a-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hvled001a.step` / `hvled001a.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/hvled001a.pdf) (30 pp, sha256 `af5a2daa962fe1f8`, retrieved 2026-10-08, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/hvled001a-datasheet.pdf)
page.jsonadded+210@@ -0,0 +1,210 @@+{+ "slug": "hvled001a",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics LED Drivers, SOP-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "led drivers",+ "hvled001a",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "hvled001a.kicad_sym",+ "hvled001a.kicad_mod",+ "hvled001a.glb",+ "hvled001a.step",+ "hvled001a.lbr",+ "docs/hero.png",+ "docs/hvled001a-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "hvled001a-hero.glb",+ "hvled001a-hero.overlay.json"+ ],+ "component": {+ "mpn": "HVLED001A",+ "manufacturer": "STMicroelectronics",+ "package": "SOP-10",+ "pin_count": 10,+ "category": "LED Drivers",+ "subcategory": "LED Drivers",+ "datasheet": "https://www.st.com/resource/en/datasheet/hvled001a.pdf",+ "parts": {+ "symbol": "hvled001a.kicad_sym",+ "footprint": "hvled001a.kicad_mod",+ "model_3d": "hvled001a-hero.glb",+ "model_3d_plain": "hvled001a.glb",+ "model_3d_step": "hvled001a-etched.step",+ "model_3d_step_plain": "hvled001a.step",+ "lbr": "hvled001a.lbr"+ },+ "distributor_links": {+ "lcsc": "C5267700",+ "mouser": "511-HVLED001A"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T01:51:57Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": null,+ "status": "no match"+ },+ "mouser": {+ "pn": "511-HVLED001A",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "HVSU",+ "type": "input",+ "description": "High-voltage startup and input-voltage sense pin, rated to withstand 800 V, intended to be tied to the input voltage through a low-value resistor (1 k typ.)."+ },+ {+ "number": "2",+ "name": "N.C.",+ "type": "unconnected",+ "description": "Not connected pin."+ },+ {+ "number": "3",+ "name": "TOFF",+ "type": "input",+ "description": "Applying a voltage to this pin sets the zero-voltage-detection blanking time, leaving it unconnected gives the minimum blanking time, with an operating voltage of 0 to 3.3 V and a maximum applied voltage of 7 V."+ },+ {+ "number": "4",+ "name": "FB",+ "type": "input",+ "description": "Loop-regulation input driven directly by the optocoupler phototransistor and/or connected to the primary-side regulation compensation network, with an absolute maximum voltage of -0.3 V to 3.6 V."+ },+ {+ "number": "5",+ "name": "CTRL",+ "type": "input",+ "description": "Disables the IC and generates the soft-start ramp, with a maximum injected current of 1 mA and an absolute maximum voltage of -0.3 V to VCC in stop mode."+ },+ {+ "number": "6",+ "name": "ZCD",+ "type": "input",+ "description": "Multi-function pin for zero-current detection, primary-side output-voltage sensing and input-voltage brownout sensing, with a negative source current limited to 1 mA and a maximum pin voltage of 7 V."+ },+ {+ "number": "7",+ "name": "CS",+ "type": "input",+ "description": "Input to the current-sense comparator for power regulation, with an applied voltage of -0.3 V to 7 V, where a second-level overcurrent (OCP) threshold detects abnormal currents."+ },+ {+ "number": "8",+ "name": "GND",+ "type": "power_in",+ "description": "Reference ground pin for the IC; bulk and high-frequency VCC capacitors return to this pin."+ },+ {+ "number": "9",+ "name": "GD",+ "type": "output",+ "description": "Gate driver output able to drive power MOSFET and IGBT gates, with a maximum swing from -0.3 V up to VCC."+ },+ {+ "number": "10",+ "name": "VCC",+ "type": "power_in",+ "description": "IC supply pin with internal UVLO, absolute maximum supply voltage of 18 V, requiring a bulk capacitor (around 10 µF) and a 100 nF ceramic capacitor to GND."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Pin numbers and names were taken from Table 2 (Pin description) because the pin-connection figure (F; The datasheet lists only the SSO10 package for this MPN (tube and tape-and-reel ordering codes share; Pin types are inferred for KiCad ERC classes (the datasheet does not classify pins). HVSU, TOFF, FB,"+ ],+ "pages_sent": 30,+ "cost_usd": 0.0929,+ "at": "2026-10-08T01:51:36"+ },+ "datasheet": {+ "url": "https://www.st.com/resource/en/datasheet/hvled001a.pdf",+ "pages": 30,+ "sha256": "af5a2daa962fe1f8",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 10,+ "described": 10,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "hvled001a.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.06,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "48b2085e35bf0fef4e09ffee9e424e1096e23cc9e78abb8cd8c2c04aa116bb29",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "hvled001a-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.06,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "dda6c4947becb29202908de34c3ed1b68d60e220af532b77519ac3114d03b88b",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}