component
HVLED001A
Public Made by Adomby adom
STMicroelectronics LED Drivers, SOP-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownHVLED001A
STMicroelectronics · LED Drivers · SOP-10
HVLED001A from STMicroelectronics, in a SOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | HVSU | input | High-voltage startup and input-voltage sense pin, rated to withstand 800 V, intended to be tied to the input voltage through a low-value resistor (1 k typ.). |
| 2 | N.C. | unconnected | Not connected pin. |
| 3 | TOFF | input | Applying a voltage to this pin sets the zero-voltage-detection blanking time, leaving it unconnected gives the minimum blanking time, with an operating voltage of 0 to 3.3 V and a maximum applied voltage of 7 V. |
| 4 | FB | input | Loop-regulation input driven directly by the optocoupler phototransistor and/or connected to the primary-side regulation compensation network, with an absolute maximum voltage of -0.3 V to 3.6 V. |
| 5 | CTRL | input | Disables the IC and generates the soft-start ramp, with a maximum injected current of 1 mA and an absolute maximum voltage of -0.3 V to VCC in stop mode. |
| 6 | ZCD | input | Multi-function pin for zero-current detection, primary-side output-voltage sensing and input-voltage brownout sensing, with a negative source current limited to 1 mA and a maximum pin voltage of 7 V. |
| 7 | CS | input | Input to the current-sense comparator for power regulation, with an applied voltage of -0.3 V to 7 V, where a second-level overcurrent (OCP) threshold detects abnormal currents. |
| 8 | GND | power_in | Reference ground pin for the IC; bulk and high-frequency VCC capacitors return to this pin. |
| 9 | GD | output | Gate driver output able to drive power MOSFET and IGBT gates, with a maximum swing from -0.3 V up to VCC. |
| 10 | VCC | power_in | IC supply pin with internal UVLO, absolute maximum supply voltage of 18 V, requiring a bulk capacitor (around 10 µF) and a 100 nF ceramic capacitor to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOP-10 |
| Category | LED Drivers |
| Pins | 10 |
CAD (KiCad official)
- Symbol:
HVLED001A - Footprint:
Package_SO:SOIC-10_3.9x4.9mm_P1mm - 3D model: SOP-10, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.75 mm nominal SOIC height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
hvled001a-etched.step/hvled001a-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hvled001a.step/hvled001a.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (30 pp, sha256
af5a2daa962fe1f8, retrieved 2026-10-08, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).