main
History Download
Ray Publish 0.1.0 fd4e968

HVDA551QDRQ1

Texas Instruments · CAN Transceivers · SOIC-8

HVDA551QDRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 TXD input CAN transmit data input, low for a dominant bus state and high for a recessive bus state, and the TXD pin is pulled up to VIO on the HVDA551 so a floating TXD is recessive.
2 GND power_in Ground connection for the transceiver, to which all voltages except differential bus voltages are referenced.
3 VCC power_in Transceiver 5-V supply voltage with a recommended range of 4.68 V to 5.33 V and undervoltage detection on VCC forcing standby mode between 3.2 V and 4 V.
4 RXD output CAN receive data output, low in the dominant bus state and high in the recessive bus state, with recommended output current limits of −2 mA (IOH) and 2 mA (IOL).
5 VIO power_in Transceiver logic-level (I/O) supply voltage with a recommended range of 3 V to 5.33 V, and undervoltage detection on VIO forcing standby mode between 1.9 V and 2.95 V.
6 CANL bidirectional Low-level CAN bus line, which withstands bus-fault voltages from −27 V to 40 V and has ±12 kV HBM ESD protection on the bus pins.
7 CANH bidirectional High-level CAN bus line, which withstands bus-fault voltages from −27 V to 40 V and has ±12 kV HBM ESD protection on the bus pins.
8 STB input Standby mode select input where high selects low-power standby with RXD wake-up request and low selects normal mode, with an internal pull-up to VIO on the HVDA551.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Interface
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC -0.3 6 V 4
I/O supply voltage VIO -0.3 6 V 4
Voltage at bus terminals (CANH, CANL) -27 40 V 4
Receiver output current (RXD) IO 20 mA 4
Voltage input (TXD, STB, S) VI -0.3 6 V HVDA55x; VI ≤ VIO + 0.3 4
Operating virtual-junction temperature TJ -40 150 °C 4
Storage temperature Tstg 150 °C 4
Supply voltage VCC 4.68 5.33 V 5
I/O supply voltage VIO 3 5.33 V 5
Voltage at any bus terminal (separately or common mode) VI or VIC -12 12 V 5
Low-level input voltage, TXD, STB VIL 0 V for HVD553, VIO = VCC 5
Differential input voltage, bus (between CANH and CANL) VID -6 6 V 5
High-level output current, RXD IOH -2 mA 5
Low-level output current, RXD IOL 2 mA 5
Operating ambient free-air temperature TA -40 125 °C 5
ICC 5-V supply current, normal mode (dominant) ICC 50 70 mA Normal mode (dominant), TXD at 0 V, 60-Ω load, STB at 0 V 5
ICC 5-V supply current, normal mode (recessive) ICC 6.75 10 mA Normal mode (recessive), TXD at VIO, no load, STB at 0 V 5
IIO I/O supply current, standby mode IIO 6.5 15 µA Standby mode (HVDA551 only), STB at VIO, VCC = 5.33 V or 0 V, RXD floating, TXD at VIO, TA = -40°C, 25°C, 125°C 5
IIO I/O supply current, normal mode (dominant) IIO 85 300 µA Normal mode (dominant), VCC = 5.33 V, RXD floating, TXD at 0 V 5
IIO I/O supply current, normal mode (recessive) IIO 70 300 µA Normal mode (recessive), VCC = 5.33 V, RXD floating, TXD at VIO 5
Undervoltage detection on VCC for forced standby mode UVVCC 3.2 3.6 4 V 5
Undervoltage detection on VIO for forced standby mode UVVIO 1.9 2.45 2.95 V 5
Bus output voltage (dominant), CANH VO(D) 2.9 4.5 V CANH, VI = 0 V, STB at 0 V, RL = 60 Ω 6
Bus output voltage (dominant), CANL VO(D) 0.8 1.75 V CANL, VI = 0 V, STB at 0 V, RL = 60 Ω 6
Bus output voltage (recessive) VO(R) 2 2.5 3 V VI = VIO, VIO = 3 V, STB at 0 V, RL = 60 Ω 6
Bus output voltage (standby mode) VO(STBY) -0.1 0.1 V Standby mode (HVDA551 only), STB at VIO, RL = 60 Ω 6
Differential output voltage (dominant), RL = 60 Ω VOD(D) 1.5 3 V VI = 0 V, RL = 60 Ω, STB at 0 V 6
Differential output voltage (dominant), RL = 45 Ω VOD(D) 1.4 3 V VI = 0 V, RL = 45 Ω, STB at 0 V 6
Differential output voltage (recessive), RL = 60 Ω VOD(R) -0.012 0.012 V VI = 3 V, STB at 0 V, RL = 60 Ω 6
Differential output voltage (recessive), no load VOD(R) -0.5 0.05 V VI = 3 V, STB at 0 V, no load 6
Steady-state common-mode output voltage VOC(SS) 2 2.5 3 V STB at 0 V, RL = 60 Ω 6
Short-circuit steady-state output current, dominant (CANH) IOS(SS)_DOM -100 mA VCANH = 0 V, CANL open, TXD = low 6
Short-circuit steady-state output current, dominant (CANL) IOS(SS)_DOM 100 mA VCANL = 32 V, CANH open, TXD = low 6
Short-circuit steady-state output current, recessive (CANH) IOS(SS)_REC -10 10 mA -20 V ≤ VCANH ≤ 32 V, CANL open, TXD = high 6
Short-circuit steady-state output current, recessive (CANL) IOS(SS)_REC -10 10 mA -20 V ≤ VCANL ≤ 32 V, CANH open, TXD = high 6
Positive-going input threshold voltage VIT+ 800 900 mV Normal mode, STB at 0 V 6
Negative-going input threshold voltage VIT- 500 650 mV Normal mode, STB at 0 V 6
Input threshold voltage (standby) VIT(STBY) 400 1150 mV HVDA551 only, standby mode, STB at VIO 6
Differential input resistance RID 29 80 kΩ HVDA551: TXD at VIO, VIO = 3.3 V, STB at 0 V 7
Input resistance (CANH or CANL) RIN 14.5 25 40 kΩ HVDA551: TXD at VIO, VIO = 3.3 V, STB at 0 V 7
Input resistance matching RI(M) -3 0 3 % [1, RIN(CANH) / RIN(CANL)] × 100%, V(CANH) = V(CANL) 7
High-level input current, TXD IIH -2 2 µA HVDA551: TXD at VIO 7
Low-level input current, TXD IIL -100 -7 µA TXD at 0 V 7
High-level input current, STB IIH -2 2 µA HVDA551: STB at VIO 7
Total loop delay 1 (TXD to RXD, recessive to dominant) tPROP(LOOP1) 70 230 ns Driver input (TXD) to receiver output (RXD), recessive to dominant, see Figure 9, STB at 0 V 8
Total loop delay 2 (TXD to RXD, dominant to recessive) tPROP(LOOP2) 70 230 ns Driver input (TXD) to receiver output (RXD), dominant to recessive, see Figure 9, STB at 0 V 8
Dominant time-out t(DOM) 1200 2000 2800 µs See Figure 10 8
Dominant time required on bus for wake-up from standby tBUS 1.5 5 µs HVDA551 only, STB at VIO, see Figure 18 and Figure 19 8
Recessive time to clear standby receiver output tCLEAR 1.5 5 µs HVDA551 only, STB at VIO, see Figure 18 and Figure 19 8
5-V supply current, standby mode (HVDA551 only) ICC 5 µA Standby mode (HVDA551 only), STB at VIO, VCC = 5.33 V, VIO = 3 V, TXD at VIO 5
Hysteresis voltage, undervoltage detection on VCC for standby mode VHYS(UVVCC) 200 mV For undervoltage detection on UVVCC for standby mode 5
Hysteresis voltage (receiver) Vhys 125 mV VIT+, VIT- 6
Power-off (unpowered) bus input leakage current II(OFF_LKG) 3 µA CANH = CANL = 5 V, VCC at 0 V, VIO at 0 V, TXD at 0 V 6
Input capacitance to ground (CANH or CANL) CI 13 pF HVDA551: TXD at VIO, VIO at 3.3 V 7
Average power dissipation (TJ = 27°C) PD 140 mW VCC = 5 V, VIO = VCC, TJ = 27°C, RL = 60 Ω, STB at 0 V, input to TXD at 500 kHz, 50% duty cycle, CL at RXD = 15 pF 7
Average power dissipation (TJ = 130°C) PD 215 mW VCC = 5.33 V, VIO = VCC, TJ = 130°C, RL = 60 Ω, STB at 0 V, input to TXD at 500 kHz, 50% duty cycle, CL at RXD = 15 pF 7
Thermal shutdown temperature 185 °C 7
Junction-to-ambient thermal resistance, low-K RθJA 140 °C/W Low-K thermal resistance 5
Junction-to-ambient thermal resistance, high-K RθJA 112 °C/W High-K thermal resistance 5
Junction-to-case (top) thermal resistance RθJC(top) 56 °C/W 5

CAD (KiCad official)

  • Symbol: HVDA551QDRQ1
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: hvda551qdrq1-etched.step / hvda551qdrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hvda551qdrq1.step / hvda551qdrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (32 pp, sha256 8a089a6f08466e5e, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF