main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers hv9961lg-g: viewers · Ray
hv9961lg-g-etched.glb Publish 0.1.0 · Ray
hv9961lg-g-etched.step hv9961lg-g: factory component page (tier=mfr) · Ray
hv9961lg-g-hero.glb hv9961lg-g: hero GLB from the etched model (keeps the MPN mark) · Ray
hv9961lg-g-hero.overlay.json Publish 0.1.0 · Ray
hv9961lg-g.glb Publish 0.1.0 · Ray
hv9961lg-g.kicad_mod Publish 0.1.0 · Ray
hv9961lg-g.kicad_sym Publish 0.1.0 · Ray
hv9961lg-g.lbr Publish 0.1.0 · Ray
hv9961lg-g.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

HV9961LG-G

Microchip Tech · LED Drivers · SOIC-8

HV9961LG-G from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Input of an 8V-450V linear regulator that powers the IC and maintains 7.5V at VDD.
2 CS input Current sense pin used to sense the FET current with an external sense resistor; hiccup short-circuit protection trips when CS exceeds 0.44V.
3 GND power_in Ground return for all internal circuitry, which must be electrically connected to the ground of the power train.
4 GATE output Output of the gate driver for driving an external N-channel power MOSFET.
5 PWMD input PWM dimming input: pulled to GND turns the gate driver off, pulled high the gate driver operates normally (low ≤0.8V, high ≥2.2V).
6 VDD power_out Power supply pin for all internal circuits (7.5V regulated, externally drivable up to under 12V), to be bypassed with a low ESR capacitor of at least 0.1 µF to GND.
7 LD input Linear dimming input that sets the current sense threshold while below 1.5V; gate output is disabled below 150 mV and recovers at 200 mV.
8 RT passive A resistor connected between this pin and GND programs the gate off-time (30 kΩ ≤ RT ≤ 1 MΩ).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-8
Category Display Modules / LED Drivers / Display Drivers
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input DC Supply Voltage Range VINDC 8 450 V DC input voltage (Note 1 and Note 2) 4
Shutdown Mode Supply Current IINSD 0.5 1 mA Pin PWMD connected to GND (Note 2) 4
Internally Regulated Voltage VDD 7.25 7.5 7.75 V VIN = 8V, IDD(EXT) = 0 mA, 500 pF at gate, RT = 226 kΩ 4
Line Regulation of VDD ΔVDD, line 0 1 V VIN = 8V-450V, IDD(EXT) = 0 mA, 500 pF at gate, RT = 226 kΩ 4
Load Regulation of VDD ΔVDD, load 0 100 mV IDD(EXT) = 0 mA-1 mA, 500 pF at gate, RT = 226 kΩ 4
VDD Undervoltage Lockout Upper Threshold VUVLO 6.45 6.7 6.95 V VIN rising (Note 2) 4
VDD Undervoltage Lockout Hysteresis ΔVUVLO 500 mV VIN falling 4
Maximum Input Current (Limited by UVLO) IIN, MAX 3.5 mA VIN = 8V, TA = 25°C (Note 3) 4
Maximum Input Current (Limited by UVLO) IIN, MAX 1.5 mA VIN = 8V, TA = 125°C (Note 3) 4
PWMD Input Low Voltage VPWMD(LO) 0.8 V VIN = 8V-450V (Note 2) 4
PWMD Input High Voltage VPWMD(HI) 2.2 V VIN = 8V-450V (Note 2) 4
PWMD Pull-down Resistance RPWMD 50 100 150 kΩ VPWMD = 5V 4
Current Sense Reference Voltage VCST 268 275 286 mV VLD = 1.5V 4
LD-to-CS Voltage Ratio AV(LD) 0.182 0.185 0.188 VLD = 1.2V 4
LD-to-CS Voltage Offset AV x VLD(OFFSET) 0 10 mV Offset = VCS- AV(LD) x VLD, VLD = 1.2V 4
CS Threshold Temperature Regulation ΔVCST(TEMP) 5 mV (Note 2) 5
Current Sense Blanking Interval TBLANK 150 320 ns (Note 2) 5
Minimum On-time TON(MIN) 1000 ns VCS = VCST + 30 mV 5
Maximum Steady-state Duty Cycle DMAX 75 % Reduction in output LED current may occur beyond this duty cycle 5
Hiccup Threshold Voltage VCSH 410 440 470 mV 5
Current Limit Delay CS-to-Gate TDELAY 150 ns VCS = VCSH + 30 mV 5
Short-circuit Hiccup Time THICCUP 350 400 550 μs 5
Minimum On-time (Short-circuit) TON(MIN),SC 430 ns VCS = VDD 5
Off-time TOFF 32 40 48 μs RT = 1 MΩ 5
Off-time TOFF 8 10 12 μs RT = 226 kΩ 5
Gate Sourcing Current ISOURCE 0.165 A VGATE = 0V, VDD = 7.5V 5
Gate Sinking Current ISINK 0.165 A VGATE = VDD, VDD = 7.5V 5
Gate Output Rise Time tr 30 50 ns CGATE = 500 pF, VDD = 7.5V 5
Gate Output Fall Time tf 30 50 ns CGATE = 500 pF, VDD = 7.5V 5
Operating Ambient Temperature TA -40 125 °C 5
Maximum Junction Temperature TJ(MAX) 150 °C 5
Storage Temperature TS -65 150 °C 5
Package Thermal Resistance, 8-lead SOIC θJA 101 °C/W 8-lead SOIC 5
VIN to GND VIN -0.5 470 V 4
VDD to GND VDD 12 V 4
CS, LD, PWMD, Gate, RT to GND -0.3 V Max is VDD+0.3V 4
Junction Temperature TJ -40 150 °C 4
Storage Temperature TS -65 150 °C 4
Continuous Power Dissipation, 8-lead SOIC 650 mW TA = +25°C 4
LD Input Shutdown Threshold Voltage VLD(OFF) 150 mV VLD falling 5
LD Input Enable Threshold Voltage VLD(EN) 200 mV VLD rising 5

CAD (KiCad official)

  • Symbol: HV9961LG-G
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: hv9961lg-g-etched.step / hv9961lg-g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hv9961lg-g.step / hv9961lg-g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (16 pp, sha256 2a448a9b0d6f8478, retrieved 2026-10-26, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF