main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs hv9910blg-g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
hv9910blg-g-etched.fit.json hv9910blg-g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
hv9910blg-g-etched.glb hv9910blg-g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
hv9910blg-g-etched.step hv9910blg-g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
hv9910blg-g.glb Publish 0.1.0 · Ray
hv9910blg-g.kicad_mod Publish 0.1.0 · Ray
hv9910blg-g.kicad_sym Publish 0.1.0 · Ray
hv9910blg-g.lbr rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect an… · Ray
hv9910blg-g.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
pads.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
page.json hv9910blg-g: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md hv9910blg-g: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

HV9910BLG-G

Microchip · LED Drivers · SOIC-8

HV9910BLG-G from Microchip, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Input to the internal 8.0-450V linear regulator that supplies VDD. Absolute maximum 470V to GND; typical operating range 8.0-450V DC.
2 CS input Current sense input. Senses the external FET current across a sense resistor RCS; when this pin exceeds the lower of the internal 250mV reference or the LD pin voltage, GATE goes low. Blanking interval 150-280ns.
3 GND power_in Ground return for all internal circuitry. Must be electrically connected to the ground of the power train.
4 GATE output Output gate driver for an external N-channel power MOSFET. Sourcing/sinking capability 165mA, rise/fall time 30-50ns into 500pF at VDD=7.5V.
5 PWMD input PWM dimming input. When pulled to GND, the GATE driver is disabled; when pulled high (>=2.0V), GATE operates normally. Internal pull-down of 50-150kΩ. Tie to VDD to disable PWM dimming.
6 VDD power_out Internally regulated 7.5V supply for all internal circuits. Must be bypassed with a low-ESR capacitor (>=0.1µF) to GND. Can be externally driven above the internal regulator voltage but must not exceed 12V.
7 LD input Linear dimming input. Sets the current-sense threshold when the pin voltage is less than 250mV (typ); tie to VDD to use the internal 250mV reference. Accepts a 0-250mV analog control signal for LED current adjustment.
8 RT passive Oscillator timing resistor pin. Resistor from RT to GND sets constant-frequency operation; resistor from RT to GATE sets constant off-time mode. tOSC(µs) = (RT(kΩ)+22)/25.

Key specifications

Parameter Value
Manufacturer Microchip
Package SOIC-8
Category LED-drv
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • HV9910BLG-G
  • HV9910BLG-GNG-G

CAD (KiCad official)

  • Symbol: HV9910BLG-G
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: hv9910blg-g-etched.step / hv9910blg-g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hv9910blg-g.step / hv9910blg-g.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
hv9910blg-g.step 122 KB You want the bare part, or you mark your own boards.
hv9910blg-g-etched.step 2.2 MB You want the part with HV9910BLG-G already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 538 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip datasheet (15 pp, sha256 69b6d679b136d563, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF