component
HV9910BLG-G
Public Made by Adomby adom
Microchip LED Drivers, SOIC-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+7−4@@ -56,13 +56,13 @@ "number": "5", "name": "PWMD", "type": "input",- "description": "PWM dimming input. When pulled to GND, the GATE driver is disabled; when pulled high (>=2.0V), GATE operates normally. Internal pull-down of 50-150k\u03a9. Tie to VDD to disable PWM dimming."+ "description": "PWM dimming input. When pulled to GND, the GATE driver is disabled; when pulled high (>=2.0V), GATE operates normally. Internal pull-down of 50-150kΩ. Tie to VDD to disable PWM dimming." }, { "number": "6", "name": "VDD", "type": "power_out",- "description": "Internally regulated 7.5V supply for all internal circuits. Must be bypassed with a low-ESR capacitor (>=0.1\u00b5F) to GND. Can be externally driven above the internal regulator voltage but must not exceed 12V."+ "description": "Internally regulated 7.5V supply for all internal circuits. Must be bypassed with a low-ESR capacitor (>=0.1µF) to GND. Can be externally driven above the internal regulator voltage but must not exceed 12V." }, { "number": "7",@@ -74,7 +74,7 @@ "number": "8", "name": "RT", "type": "passive",- "description": "Oscillator timing resistor pin. Resistor from RT to GND sets constant-frequency operation; resistor from RT to GATE sets constant off-time mode. tOSC(\u00b5s) = (RT(k\u03a9)+22)/25."+ "description": "Oscillator timing resistor pin. Resistor from RT to GND sets constant-frequency operation; resistor from RT to GATE sets constant off-time mode. tOSC(µs) = (RT(kΩ)+22)/25." } ], "provenance": {@@ -138,5 +138,8 @@ "docs/hv9910blg-g-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }