main
Ray
Publish 0.1.0
c30ce94
HV98100T-E
Microchip Tech · LED Drivers · SOT-23-6
HV98100T-E from Microchip Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IND | input | Input from the LED string anode for valley detection and over-voltage protection; the pin is maintained at approximately 4.3V and over-voltage is detected if the sourced current exceeds 450 μA. |
| 2 | GND | power_in | Ground pin of the IC; the VDD capacitor and COMP network connect to this pin, and the GND pin connects to the sense resistor. |
| 3 | COMP | output | Output of the internal transconductance amplifier; a compensation network between COMP and GND stabilizes the closed-loop LED current control. |
| 4 | CS | input | Current sense input that senses the inductor current to derive the output LED current and protect the inductor from saturation. |
| 5 | PVDD | power_in | Power supply pin for the IC; a minimum of 4.7 μF capacitor must be connected between PVDD and GND for stability of the internal shunt regulator. |
| 6 | GATE | output | Gate drive output of the IC used to control the switching of the external FET. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-6 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage PVDD to GND | -0.3 | 20 | V | 3 | |||
| GATE to GND | -0.3 | V | max is (PVDD +0.5V) | 3 | |||
| CS, COMP, IND to GND | -0.3 | 4.5 | V | 3 | |||
| Operating Junction Temperature | TJ | -40 | 125 | °C | 3 | ||
| Storage Temperature | TA | -65 | 150 | °C | 3 | ||
| ESD Protection on all pins (HBM) | 2 | kV | 3 | ||||
| PVDD Clamp Voltage | PVDD,clamp | 15.5 | 17 | 18.5 | V | Current into PVDD = 4.0 mA; CGATE = 500 pF; fsw = 100 kHz; | 3 |
| VDD Start Voltage | VDD,ON | 14.5 | 16 | 17.5 | V | GATE starts switching | 3 |
| VDD Stop Voltage | VDD,OFF | 6.5 | 8 | 9.5 | V | GATE stops switching | 3 |
| Current into clamp | IDD,max | 5 | mA | Note 1 | 3 | ||
| Current drawn by IC before start | IDD,Q | 200 | μA | Measured at PVDD = 12V after PVDD rises from 0V to 12V | 3 | ||
| Current drawn by IC during operation | IDD,OP | 4.3 | mA | CGATE = 500 pF; fsw = 100 kHz; COMP = 3V; I_INDSINK = 200 μA; I_INDSOURCE = 250 μA | 3 | ||
| GATE Driver Sourcing Current | ISOURCE | 0.3 | A | Note 2 | 3 | ||
| Gate Driver Sinking Current | ISINK | 0.6 | A | Note 2 | 3 | ||
| Gate Rise Time (10%-90%) | TRISE | 45 | ns | CGATE = 500 pF | 3 | ||
| Gate Fall Time (10%-90%) | TFALL | 23 | ns | CGATE = 500 pF | 3 | ||
| Internal Reference Voltage | CSREF | 194 | 204 | 214 | mV | Note 2 | 3 |
| OTA Offset Voltage | VOFFSET | -7.5 | 7.5 | mV | Note 2 | 3 | |
| Open Loop DC Gain | AV | 55 | dB | 1V COMP 4V; Output open Note 1 | 3 | ||
| Small Signal Transconductance | gm | 160 | 230 | 300 | μA/V | 1V COMP 4V; Note 1 | 3 |
| Gain Bandwidth Product | GBW | 0.16 | 0.24 | MHz | CCOMP = 150 pF (Note 2) | 3 | |
| RON of COMP Reset FET | RCOMP | 300 | 400 | 500 | 4 | ||
| Start-up Clock | Fstart | 6.25 | 10 | 15 | kHz | 4 | |
| Maximum Frequency Limit | Fmax | 217 | 320 | 480 | kHz | Note 1 | 4 |
| Current into IND pin | IIND | 600 | μA | Note 2 | 4 | ||
| Voltage at IND pin | VIND | 3.87 | 4.3 | 4.73 | V | IIND = 250 μA | 4 |
| Comparator Delay Time | Tdelay | 50 | ns | Note 2 | 4 | ||
| GATE On-time (HV98100) | TON | 6.83 | 7.35 | 7.89 | μs | Ext Clk = 50 kHz; COMP = 2V | 4 |
| Over Voltage Protection Current Threshold | IOVP | 350 | 450 | 550 | μA | GATE = LOW | 4 |
| Over Current Protection Reference | OCPREF | 2.2 | 2.35 | 2.5 | V | 4 | |
| Over Current Protection Blanking Time | TBLNKOCP | 150 | 250 | ns | Note 2 | 4 | |
| Detect time for Over Current Protection | TDETOCP | 150 | 250 | ns | After TBLNKOCP (Note 2) | 4 | |
| Over Current Comparator Delay | OCPDLY | 50 | 100 | ns | 100 mV overdrive (Note 2) | 4 | |
| Internal Voltage for Timing (HV98100) | VTref | 2 | V | HV98100 | 4 | ||
| Internal Timing Constant | KT | 1.25 | μs | 4 | |||
| Thermal Resistance, 6L-SOT-23 junction to ambient | JA | 124 | °C/W | 4 | |||
| Thermal Resistance, 6L-SOT-23 junction to case | JC | 74 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
HV98100T-E - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
hv98100t-e-etched.step/hv98100t-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hv98100t-e.step/hv98100t-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (26 pp, sha256
57b1ab83c03e78b9, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HV98100T-E
**Microchip Tech** · LED Drivers · SOT-23-6
HV98100T-E from Microchip Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IND | input | Input from the LED string anode for valley detection and over-voltage protection; the pin is maintained at approximately 4.3V and over-voltage is detected if the sourced current exceeds 450 μA. |
| 2 | GND | power_in | Ground pin of the IC; the VDD capacitor and COMP network connect to this pin, and the GND pin connects to the sense resistor. |
| 3 | COMP | output | Output of the internal transconductance amplifier; a compensation network between COMP and GND stabilizes the closed-loop LED current control. |
| 4 | CS | input | Current sense input that senses the inductor current to derive the output LED current and protect the inductor from saturation. |
| 5 | PVDD | power_in | Power supply pin for the IC; a minimum of 4.7 μF capacitor must be connected between PVDD and GND for stability of the internal shunt regulator. |
| 6 | GATE | output | Gate drive output of the IC used to control the switching of the external FET. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-6 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage PVDD to GND | | -0.3 | | 20 | V | | 3 |
| GATE to GND | | -0.3 | | | V | max is (PVDD +0.5V) | 3 |
| CS, COMP, IND to GND | | -0.3 | | 4.5 | V | | 3 |
| Operating Junction Temperature | TJ | -40 | | 125 | °C | | 3 |
| Storage Temperature | TA | -65 | | 150 | °C | | 3 |
| ESD Protection on all pins (HBM) | | | | 2 | kV | | 3 |
| PVDD Clamp Voltage | PVDD,clamp | 15.5 | 17 | 18.5 | V | Current into PVDD = 4.0 mA; CGATE = 500 pF; fsw = 100 kHz; | 3 |
| VDD Start Voltage | VDD,ON | 14.5 | 16 | 17.5 | V | GATE starts switching | 3 |
| VDD Stop Voltage | VDD,OFF | 6.5 | 8 | 9.5 | V | GATE stops switching | 3 |
| Current into clamp | IDD,max | | | 5 | mA | Note 1 | 3 |
| Current drawn by IC before start | IDD,Q | | | 200 | μA | Measured at PVDD = 12V after PVDD rises from 0V to 12V | 3 |
| Current drawn by IC during operation | IDD,OP | | | 4.3 | mA | CGATE = 500 pF; fsw = 100 kHz; COMP = 3V; I_INDSINK = 200 μA; I_INDSOURCE = 250 μA | 3 |
| GATE Driver Sourcing Current | ISOURCE | 0.3 | | | A | Note 2 | 3 |
| Gate Driver Sinking Current | ISINK | 0.6 | | | A | Note 2 | 3 |
| Gate Rise Time (10%-90%) | TRISE | | | 45 | ns | CGATE = 500 pF | 3 |
| Gate Fall Time (10%-90%) | TFALL | | | 23 | ns | CGATE = 500 pF | 3 |
| Internal Reference Voltage | CSREF | 194 | 204 | 214 | mV | Note 2 | 3 |
| OTA Offset Voltage | VOFFSET | -7.5 | | 7.5 | mV | Note 2 | 3 |
| Open Loop DC Gain | AV | 55 | | | dB | 1V COMP 4V; Output open Note 1 | 3 |
| Small Signal Transconductance | gm | 160 | 230 | 300 | μA/V | 1V COMP 4V; Note 1 | 3 |
| Gain Bandwidth Product | GBW | 0.16 | 0.24 | | MHz | CCOMP = 150 pF (Note 2) | 3 |
| RON of COMP Reset FET | RCOMP | 300 | 400 | 500 | | | 4 |
| Start-up Clock | Fstart | 6.25 | 10 | 15 | kHz | | 4 |
| Maximum Frequency Limit | Fmax | 217 | 320 | 480 | kHz | Note 1 | 4 |
| Current into IND pin | IIND | | | 600 | μA | Note 2 | 4 |
| Voltage at IND pin | VIND | 3.87 | 4.3 | 4.73 | V | IIND = 250 μA | 4 |
| Comparator Delay Time | Tdelay | | | 50 | ns | Note 2 | 4 |
| GATE On-time (HV98100) | TON | 6.83 | 7.35 | 7.89 | μs | Ext Clk = 50 kHz; COMP = 2V | 4 |
| Over Voltage Protection Current Threshold | IOVP | 350 | 450 | 550 | μA | GATE = LOW | 4 |
| Over Current Protection Reference | OCPREF | 2.2 | 2.35 | 2.5 | V | | 4 |
| Over Current Protection Blanking Time | TBLNKOCP | 150 | | 250 | ns | Note 2 | 4 |
| Detect time for Over Current Protection | TDETOCP | 150 | | 250 | ns | After TBLNKOCP (Note 2) | 4 |
| Over Current Comparator Delay | OCPDLY | | 50 | 100 | ns | 100 mV overdrive (Note 2) | 4 |
| Internal Voltage for Timing (HV98100) | VTref | | 2 | | V | HV98100 | 4 |
| Internal Timing Constant | KT | | 1.25 | | μs | | 4 |
| Thermal Resistance, 6L-SOT-23 junction to ambient | JA | | 124 | | °C/W | | 4 |
| Thermal Resistance, 6L-SOT-23 junction to case | JC | | 74 | | °C/W | | 4 |
## CAD (KiCad official)
- Symbol: `HV98100T-E`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `hv98100t-e-etched.step` / `hv98100t-e-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hv98100t-e.step` / `hv98100t-e.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/hv98100t-e-datasheet.pdf) (26 pp, sha256 `57b1ab83c03e78b9`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hv98100t-e-datasheet.pdf)