main
Ray
Publish 0.1.0
afb59e3
HV830LG-G
Microchip Tech · Other Lighting Drivers · SOIC-8
HV830LG-G from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Supply input, 2.0 to 9.5V operating range (absolute maximum -0.5 to +10V), also the node to which the RSW and REL resistors and the inductor connect. |
| 2 | RSW-Osc | input | Switching converter oscillator input; an external RSW resistor to VDD sets the switching frequency (about 65kHz typical with 1.0MΩ) and tying it to VDD enables the chip while GND disables it. |
| 3 | CS | passive | High-voltage output storage node where a 0.01µF to 0.1µF, 200V capacitor to GND stores energy from the inductor, regulated to about 100V typical (absolute maximum -0.5 to +120V). |
| 4 | LX | passive | Switching MOSFET connection for the external inductor (220µH typical) that is connected between LX and VDD, with on-resistance 2.0Ω typical. |
| 5 | GND | power_in | Ground reference for the device; all voltages are referenced to device ground. |
| 6 | VB | power_in | H-bridge EL lamp output B, switched opposite to VA to give 200V peak-to-peak across the lamp connected between VA and VB. |
| 7 | VA | output | H-bridge EL lamp output A, switched opposite to VB to give 200V peak-to-peak across the lamp connected between VA and VB. |
| 8 | REL-Osc | input | EL lamp driver oscillator input; an external REL resistor to VDD sets the lamp frequency (220 to 280Hz with 3.3MΩ) and tying it to VDD enables the chip while GND disables it. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| On resistance of switching transistor | RDS(ON) | 2 | 4 | Ω | I = 100mA | 2 | |
| Output voltage - regulation | VCS | 90 | 100 | 110 | V | VDD = 2.0V to 9.5V | 2 |
| Output peak-to-peak voltage | VA - VB | 180 | 200 | 220 | V | VDD = 2.0V to 9.5V | 2 |
| VDD supply current | IDD | 100 | 150 | µA | VDD = 3.0V. See Fig.1 | 2 | |
| Input current including inductor current | IIN | 35 | 40 | mA | VDD = 3.0V. See Fig.1 | 2 | |
| VA - VB output drive frequency | fEL | 220 | 250 | 280 | Hz | VDD = 3.0V. See Fig.1 | 2 |
| Inductor switching frequency | fSW | 55 | 65 | 75 | KHz | VDD = 3.0V. See Fig.1 | 2 |
| Supply voltage | VDD | 2 | 9.5 | V | 2 | ||
| VA-B output drive frequency | fEL | 1.5 | KHz | 2 | |||
| Operating temperature | TA | -25 | 85 | °C | 2 | ||
| Supply voltage | VDD | -0.5 | 10 | V | 2 | ||
| Output voltage | VCS | -0.5 | 120 | V | 2 | ||
| Power dissipation | 400 | mW | 2 | ||||
| Storage temperature | -65 | 150 | °C | 2 | |||
| Operating temperature | -25 | 85 | °C | 2 | |||
| Thermal resistance, 8-Lead SOIC | θja | 101 | °C/W | Typical | 2 | ||
| Quiescent VDD current - disabled | IDDQ | 30 | nA | RSW-Osc = Low | 2 | ||
| Output voltage on VCS | VCS | 95 | V | VDD = 3.0V. See Fig.1 | 2 | ||
| Switching transistor duty cycle | D | 88 | % | 2 |
CAD (KiCad official)
- Symbol:
HV830LG-G - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
hv830lg-g-etched.step/hv830lg-g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hv830lg-g.step/hv830lg-g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (6 pp, sha256
3f37ab53976c076b, retrieved 2026-10-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HV830LG-G
**Microchip Tech** · Other Lighting Drivers · SOIC-8
HV830LG-G from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Supply input, 2.0 to 9.5V operating range (absolute maximum -0.5 to +10V), also the node to which the RSW and REL resistors and the inductor connect. |
| 2 | RSW-Osc | input | Switching converter oscillator input; an external RSW resistor to VDD sets the switching frequency (about 65kHz typical with 1.0MΩ) and tying it to VDD enables the chip while GND disables it. |
| 3 | CS | passive | High-voltage output storage node where a 0.01µF to 0.1µF, 200V capacitor to GND stores energy from the inductor, regulated to about 100V typical (absolute maximum -0.5 to +120V). |
| 4 | LX | passive | Switching MOSFET connection for the external inductor (220µH typical) that is connected between LX and VDD, with on-resistance 2.0Ω typical. |
| 5 | GND | power_in | Ground reference for the device; all voltages are referenced to device ground. |
| 6 | VB | power_in | H-bridge EL lamp output B, switched opposite to VA to give 200V peak-to-peak across the lamp connected between VA and VB. |
| 7 | VA | output | H-bridge EL lamp output A, switched opposite to VB to give 200V peak-to-peak across the lamp connected between VA and VB. |
| 8 | REL-Osc | input | EL lamp driver oscillator input; an external REL resistor to VDD sets the lamp frequency (220 to 280Hz with 3.3MΩ) and tying it to VDD enables the chip while GND disables it. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| On resistance of switching transistor | RDS(ON) | | 2 | 4 | Ω | I = 100mA | 2 |
| Output voltage - regulation | VCS | 90 | 100 | 110 | V | VDD = 2.0V to 9.5V | 2 |
| Output peak-to-peak voltage | VA - VB | 180 | 200 | 220 | V | VDD = 2.0V to 9.5V | 2 |
| VDD supply current | IDD | | 100 | 150 | µA | VDD = 3.0V. See Fig.1 | 2 |
| Input current including inductor current | IIN | | 35 | 40 | mA | VDD = 3.0V. See Fig.1 | 2 |
| VA - VB output drive frequency | fEL | 220 | 250 | 280 | Hz | VDD = 3.0V. See Fig.1 | 2 |
| Inductor switching frequency | fSW | 55 | 65 | 75 | KHz | VDD = 3.0V. See Fig.1 | 2 |
| Supply voltage | VDD | 2 | | 9.5 | V | | 2 |
| VA-B output drive frequency | fEL | | | 1.5 | KHz | | 2 |
| Operating temperature | TA | -25 | | 85 | °C | | 2 |
| Supply voltage | VDD | -0.5 | | 10 | V | | 2 |
| Output voltage | VCS | -0.5 | | 120 | V | | 2 |
| Power dissipation | | | | 400 | mW | | 2 |
| Storage temperature | | -65 | | 150 | °C | | 2 |
| Operating temperature | | -25 | | 85 | °C | | 2 |
| Thermal resistance, 8-Lead SOIC | θja | | 101 | | °C/W | Typical | 2 |
| Quiescent VDD current - disabled | IDDQ | | 30 | | nA | RSW-Osc = Low | 2 |
| Output voltage on VCS | VCS | | 95 | | V | VDD = 3.0V. See Fig.1 | 2 |
| Switching transistor duty cycle | D | | 88 | | % | | 2 |
## CAD (KiCad official)
- Symbol: `HV830LG-G`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `hv830lg-g-etched.step` / `hv830lg-g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hv830lg-g.step` / `hv830lg-g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/hv830lg-g-datasheet.pdf) (6 pp, sha256 `3f37ab53976c076b`, retrieved 2026-10-30, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hv830lg-g-datasheet.pdf)