main
Ray
Publish 0.1.0
671bd20
HV6810WG-G
Microchip Tech · LCD Drivers · SOIC-20-300mil
HV6810WG-G from Microchip Tech, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Q8 | output | High-voltage DMOS latched driver output Q8, rated for 80V output voltage with 25 mA source-current capability. |
| 2 | Q7 | output | High-voltage DMOS latched driver output Q7, rated for 80V output voltage with 25 mA source-current capability. |
| 3 | Q6 | output | High-voltage DMOS latched driver output Q6, rated for 80V output voltage with 25 mA source-current capability. |
| 4 | CLOCK | input | Clock input; data are shifted into the data shift register on the positive edge of the clock, with a minimum clock-high pulse width of 100 ns and a maximum clock frequency of 5 MHz. |
| 5 | VSS | power_in | Ground connection, usually 0V; all voltages in the datasheet are referenced to VSS. |
| 6 | N/C | unconnected | No connection. |
| 7 | VDD | power_in | Low-voltage logic power supply, 4.5V to 5.5V. |
| 8 | LE (STROBE) | input | Latch enable strobe; parallel data pass to the Q outputs while LE is high and are held in the latches when LE is low, with a minimum LE-high pulse width of 100 ns. |
| 9 | Q5 | output | High-voltage DMOS latched driver output Q5, rated for 80V output voltage with 25 mA source-current capability. |
| 10 | Q4 | output | High-voltage DMOS latched driver output Q4, rated for 80V output voltage with 25 mA source-current capability. |
| 11 | Q3 | output | High-voltage DMOS latched driver output Q3, rated for 80V output voltage with 25 mA source-current capability. |
| 12 | Q2 | output | High-voltage DMOS latched driver output Q2, rated for 80V output voltage with 25 mA source-current capability. |
| 13 | Q1 | output | High-voltage DMOS latched driver output Q1, rated for 80V output voltage with 25 mA source-current capability. |
| 14 | BLANKING | input | When blanking is high, all Q outputs are forced low regardless of the data in each channel. |
| 15 | DATA IN | input | Serial data input to the input shift register. |
| 16 | VBB | power_in | High-voltage driver supply, 20V to 80V, which should not drop below VDD or float during operation. |
| 17 | SERIAL DATA OUT | output | Serial output of the shift register, used to cascade additional devices for larger displays. |
| 18 | N/C | unconnected | No connection. |
| 19 | Q10 | output | High-voltage DMOS latched driver output Q10, rated for 80V output voltage with 25 mA source-current capability. |
| 20 | Q9 | output | High-voltage DMOS latched driver output Q9, rated for 80V output voltage with 25 mA source-current capability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-20-300mil |
| Category | Display Modules / LED Drivers / Display Drivers |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Logic Supply Voltage | VDD | 4.5 | 5.5 | V | 3 | ||
| High Supply Voltage | VBB | 20 | 80 | V | 3 | ||
| High-level Input Voltage (for VDD = 5V) | VIH | 3.5 | 5.3 | V | for VDD = 5V | 3 | |
| Low-level Input Voltage | VIL | -0.3 | 0.8 | V | 3 | ||
| Continuous High-level Q Output Current | IOH | 25 | mA | 3 | |||
| Clock Frequency | fCLK | 5 | MHz | 3 | |||
| Operating Ambient Temperature | TA | -40 | 85 | °C | 3 | ||
| High-level Output Voltage, Q Outputs | VOH | 57.5 | 58 | V | IO = +25 mA | 3 | |
| High-level Output Voltage, Serial Output | VOH | 4 | 4.5 | V | VDD = +4.5V, IOL = +100 µA | 3 | |
| Low-level Output Voltage, Q Outputs | VOL | 0.15 | 1 | V | IO = -100 µA, blanking input at VDD | 3 | |
| Low-level Output Voltage, Serial Output | VOL | 0.05 | 0.1 | V | VDD = +4.5V, IO = -100 µA | 3 | |
| Low-level Q Output Current (Pull-down Current) | IOL | 60 | 80 | µA | TA = Max, VOL = +0.7V (Note 1) | 3 | |
| Off-state Output Current | IO(OFF) | -1 | -15 | µA | VO = 0V, blanking input at VDD (Note 1) | 3 | |
| High-level Input Current | IIH | 1 | µA | VlN = VDD | 3 | ||
| Supply Current from VDD (Standby) | IDD | 10 | 50 | µA | All inputs at 0V, one Q output high | 3 | |
| Supply Current from VBB | IBB | 0.05 | 0.1 | mA | All outputs low, all Q outputs open | 4 | |
| Pulse Duration, Clock High | tW(CKH) | 100 | ns | 4 | |||
| Pulse Duration, Latch Enable High | tW(LEH) | 100 | ns | 4 | |||
| Setup Time, Data before Clock | tSU(D) | 50 | ns | 4 | |||
| Hold Time, Data after Clock | tH(D) | 50 | ns | 4 | |||
| Delay Time, Clock to Latch Enable High | tCKH-LEH | 50 | ns | 4 | |||
| Absolute Maximum Logic Supply Voltage | VDD | 7.5 | V | Note 2: referenced to VSS | 3 | ||
| Absolute Maximum Driver Supply Voltage | VBB | 90 | V | Note 2: referenced to VSS | 3 | ||
| Absolute Maximum Output Voltage | 90 | V | Note 2: referenced to VSS | 3 | |||
| Absolute Maximum Input Voltage | -0.3 | V | to VDD +0.3V (Note 2) | 3 | |||
| Absolute Maximum Operating Ambient Temperature | TA | -45 | 85 | °C | Note 1: over operating free-air temperature | 3 | |
| Continuous Total Power Dissipation at 25°C Free-air Temperature, 20-lead SOW | 1500 | mW | at 25°C free-air temperature (Note 3) | 3 | |||
| Thermal Resistance, Junction to Ambient, 20-lead SOW | θJA | 66 | °C/W | 4 | |||
| Propagation Delay Time, Latch Enable to Output | tPD | 300 | ns | Switching characteristics, VBB = 60V, TA = 25°C (Note 1) | 4 |
CAD (KiCad official)
- Symbol:
HV6810WG-G - Footprint:
Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm - 3D model: SOIC-20-300mil (KiCad packages3D, STEP)
- 3D model files:
hv6810wg-g-etched.step/hv6810wg-g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hv6810wg-g.step/hv6810wg-g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (14 pp, sha256
fa954c9d7f374544, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HV6810WG-G
**Microchip Tech** · LCD Drivers · SOIC-20-300mil
HV6810WG-G from Microchip Tech, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Q8 | output | High-voltage DMOS latched driver output Q8, rated for 80V output voltage with 25 mA source-current capability. |
| 2 | Q7 | output | High-voltage DMOS latched driver output Q7, rated for 80V output voltage with 25 mA source-current capability. |
| 3 | Q6 | output | High-voltage DMOS latched driver output Q6, rated for 80V output voltage with 25 mA source-current capability. |
| 4 | CLOCK | input | Clock input; data are shifted into the data shift register on the positive edge of the clock, with a minimum clock-high pulse width of 100 ns and a maximum clock frequency of 5 MHz. |
| 5 | VSS | power_in | Ground connection, usually 0V; all voltages in the datasheet are referenced to VSS. |
| 6 | N/C | unconnected | No connection. |
| 7 | VDD | power_in | Low-voltage logic power supply, 4.5V to 5.5V. |
| 8 | LE (STROBE) | input | Latch enable strobe; parallel data pass to the Q outputs while LE is high and are held in the latches when LE is low, with a minimum LE-high pulse width of 100 ns. |
| 9 | Q5 | output | High-voltage DMOS latched driver output Q5, rated for 80V output voltage with 25 mA source-current capability. |
| 10 | Q4 | output | High-voltage DMOS latched driver output Q4, rated for 80V output voltage with 25 mA source-current capability. |
| 11 | Q3 | output | High-voltage DMOS latched driver output Q3, rated for 80V output voltage with 25 mA source-current capability. |
| 12 | Q2 | output | High-voltage DMOS latched driver output Q2, rated for 80V output voltage with 25 mA source-current capability. |
| 13 | Q1 | output | High-voltage DMOS latched driver output Q1, rated for 80V output voltage with 25 mA source-current capability. |
| 14 | BLANKING | input | When blanking is high, all Q outputs are forced low regardless of the data in each channel. |
| 15 | DATA IN | input | Serial data input to the input shift register. |
| 16 | VBB | power_in | High-voltage driver supply, 20V to 80V, which should not drop below VDD or float during operation. |
| 17 | SERIAL DATA OUT | output | Serial output of the shift register, used to cascade additional devices for larger displays. |
| 18 | N/C | unconnected | No connection. |
| 19 | Q10 | output | High-voltage DMOS latched driver output Q10, rated for 80V output voltage with 25 mA source-current capability. |
| 20 | Q9 | output | High-voltage DMOS latched driver output Q9, rated for 80V output voltage with 25 mA source-current capability. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-20-300mil |
| Category | Display Modules / LED Drivers / Display Drivers |
| Pins | 20 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Logic Supply Voltage | VDD | 4.5 | | 5.5 | V | | 3 |
| High Supply Voltage | VBB | 20 | | 80 | V | | 3 |
| High-level Input Voltage (for VDD = 5V) | VIH | 3.5 | | 5.3 | V | for VDD = 5V | 3 |
| Low-level Input Voltage | VIL | -0.3 | | 0.8 | V | | 3 |
| Continuous High-level Q Output Current | IOH | 25 | | | mA | | 3 |
| Clock Frequency | fCLK | | | 5 | MHz | | 3 |
| Operating Ambient Temperature | TA | -40 | | 85 | °C | | 3 |
| High-level Output Voltage, Q Outputs | VOH | 57.5 | 58 | | V | IO = +25 mA | 3 |
| High-level Output Voltage, Serial Output | VOH | 4 | 4.5 | | V | VDD = +4.5V, IOL = +100 µA | 3 |
| Low-level Output Voltage, Q Outputs | VOL | | 0.15 | 1 | V | IO = -100 µA, blanking input at VDD | 3 |
| Low-level Output Voltage, Serial Output | VOL | | 0.05 | 0.1 | V | VDD = +4.5V, IO = -100 µA | 3 |
| Low-level Q Output Current (Pull-down Current) | IOL | 60 | 80 | | µA | TA = Max, VOL = +0.7V (Note 1) | 3 |
| Off-state Output Current | IO(OFF) | | -1 | -15 | µA | VO = 0V, blanking input at VDD (Note 1) | 3 |
| High-level Input Current | IIH | | | 1 | µA | VlN = VDD | 3 |
| Supply Current from VDD (Standby) | IDD | | 10 | 50 | µA | All inputs at 0V, one Q output high | 3 |
| Supply Current from VBB | IBB | | 0.05 | 0.1 | mA | All outputs low, all Q outputs open | 4 |
| Pulse Duration, Clock High | tW(CKH) | 100 | | | ns | | 4 |
| Pulse Duration, Latch Enable High | tW(LEH) | 100 | | | ns | | 4 |
| Setup Time, Data before Clock | tSU(D) | 50 | | | ns | | 4 |
| Hold Time, Data after Clock | tH(D) | 50 | | | ns | | 4 |
| Delay Time, Clock to Latch Enable High | tCKH-LEH | 50 | | | ns | | 4 |
| Absolute Maximum Logic Supply Voltage | VDD | | | 7.5 | V | Note 2: referenced to VSS | 3 |
| Absolute Maximum Driver Supply Voltage | VBB | | | 90 | V | Note 2: referenced to VSS | 3 |
| Absolute Maximum Output Voltage | | | | 90 | V | Note 2: referenced to VSS | 3 |
| Absolute Maximum Input Voltage | | -0.3 | | | V | to VDD +0.3V (Note 2) | 3 |
| Absolute Maximum Operating Ambient Temperature | TA | -45 | | 85 | °C | Note 1: over operating free-air temperature | 3 |
| Continuous Total Power Dissipation at 25°C Free-air Temperature, 20-lead SOW | | | | 1500 | mW | at 25°C free-air temperature (Note 3) | 3 |
| Thermal Resistance, Junction to Ambient, 20-lead SOW | θJA | | 66 | | °C/W | | 4 |
| Propagation Delay Time, Latch Enable to Output | tPD | | 300 | | ns | Switching characteristics, VBB = 60V, TA = 25°C (Note 1) | 4 |
## CAD (KiCad official)
- Symbol: `HV6810WG-G`
- Footprint: `Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm`
- 3D model: SOIC-20-300mil (KiCad packages3D, STEP)
- 3D model files: `hv6810wg-g-etched.step` / `hv6810wg-g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hv6810wg-g.step` / `hv6810wg-g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/hv6810wg-g-datasheet.pdf) (14 pp, sha256 `fa954c9d7f374544`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hv6810wg-g-datasheet.pdf)