← Commit history

Publish 0.1.1

Ray ·349008be22 · ·parent 983f09d
4 files changed +711−710
README.md+35−41
@@ -9,29 +9,29 @@ HV513WG-G from Microchip Tech, in a SOIC-24-300mil. Pinout and pin descriptions | Pin | Name | Type | Function | |---|---|---|---| | 1 | NC | unconnected | No connection. |-| 2 | VDD | power_in | Logic supply voltage, recommended 4.5V to 5.5V (absolute maximum -0.5V to +6V). |-| 3 | DOUT | output | Data output buffer for cascading devices, VOH min VDD-1V at -0.1 mA. |-| 4 | BL | input | Blanking input; a logic low sets all HVOUTs low, with an internal 20 kΩ pull-up resistor. |-| 5 | POL | input | Polarity bar input logic that selects output polarity, with an internal 20 kΩ pull-up resistor. |-| 6 | CLK | input | Clock input; the shift register shifts data on the rising edge, up to 8 MHz. |-| 7 | LE | input | Latch enable bar input logic; data transfers from shift register to latches when high and is stored when low, with an internal 20 kΩ pull-up resistor. |-| 8 | SHORT | output | Short-circuit detect output; a logic 0 is asserted if an output does not reach its required state. |-| 9 | Hi-Z | input | High-impedance control; a logic input low sets all outputs in a high-impedance state, with an internal 20 kΩ pull-up resistor. |+| 2 | VDD | power_in | Logic supply voltage, recommended 4.5V to 5.5V (typ. 5V). |+| 3 | DOUT | output | Data output buffer for cascading to the next HV513; VOH is VDD-1V minimum at 0.1 mA and VOL is 1V maximum at 0.1 mA. |+| 4 | BL | input | Blanking input with internal 20 kΩ pull-up; a logic low sets all HVOUTs low. |+| 5 | POL | input | Active-low polarity input logic with internal 20 kΩ pull-up resistor. |+| 6 | CLK | input | Clock input; shift register shifts data on the low-to-high transition, up to 8 MHz at VDD = 5V. |+| 7 | LE | input | Active-low latch enable input with internal 20 kΩ pull-up; the latch stores data when LE is low and transfers the shift register to the latch when high. |+| 8 | SHORT | output | Short-circuit detect output that goes to logic 0 if an output does not reach its required state; it pulses low during normal output transitions. |+| 9 | Hi-Z | input | High-impedance control input with internal 20 kΩ pull-up; a logic low sets all outputs to a high-impedance state. | | 10 | DIN | input | Serial data input to the 8-bit shift register. |-| 11 | LGND | power_in | Low-voltage (logic) ground. |+| 11 | LGND | power_in | Low-voltage ground. | | 12 | NC | unconnected | No connection. |-| 13 | HVGND | power_in | High-voltage ground; connection to all power and ground pins is required. |-| 14 | HVGND | power_in | High-voltage ground; connection to all power and ground pins is required. |-| 15 | HVOUT1 | output | High-voltage push-pull output, up to 250V. |-| 16 | HVOUT2 | output | High-voltage push-pull output, up to 250V. |-| 17 | HVOUT3 | output | High-voltage push-pull output, up to 250V. |-| 18 | HVOUT4 | output | High-voltage push-pull output, up to 250V. |-| 19 | HVOUT5 | output | High-voltage push-pull output, up to 250V. |-| 20 | HVOUT6 | output | High-voltage push-pull output, up to 250V. |-| 21 | HVOUT7 | output | High-voltage push-pull output, up to 250V. |-| 22 | HVOUT8 | output | High-voltage push-pull output, up to 250V. |-| 23 | VPP | power_in | High-voltage supply, recommended 50V to 250V (absolute maximum 275V). |-| 24 | VPP | power_in | High-voltage supply, recommended 50V to 250V (absolute maximum 275V). |+| 13 | HVGND | power_in | High-voltage ground; connection to all power and ground pads is required. |+| 14 | HVGND | power_in | High-voltage ground; connection to all power and ground pads is required. |+| 15 | HVOUT1 | output | High-voltage push-pull output; with VPP = 200V and 20 mA source it sits at 140V minimum high, and with VDD = 4.5V and 20 mA sink it is 60V maximum low. |+| 16 | HVOUT2 | output | High-voltage push-pull output; with VPP = 200V and 20 mA source it sits at 140V minimum high, and with VDD = 4.5V and 20 mA sink it is 60V maximum low. |+| 17 | HVOUT3 | output | High-voltage push-pull output; with VPP = 200V and 20 mA source it sits at 140V minimum high, and with VDD = 4.5V and 20 mA sink it is 60V maximum low. |+| 18 | HVOUT4 | output | High-voltage push-pull output; with VPP = 200V and 20 mA source it sits at 140V minimum high, and with VDD = 4.5V and 20 mA sink it is 60V maximum low. |+| 19 | HVOUT5 | output | High-voltage push-pull output; with VPP = 200V and 20 mA source it sits at 140V minimum high, and with VDD = 4.5V and 20 mA sink it is 60V maximum low. |+| 20 | HVOUT6 | output | High-voltage push-pull output; with VPP = 200V and 20 mA source it sits at 140V minimum high, and with VDD = 4.5V and 20 mA sink it is 60V maximum low. |+| 21 | HVOUT7 | output | High-voltage push-pull output; with VPP = 200V and 20 mA source it sits at 140V minimum high, and with VDD = 4.5V and 20 mA sink it is 60V maximum low. |+| 22 | HVOUT8 | output | High-voltage push-pull output; with VPP = 200V and 20 mA source it sits at 140V minimum high, and with VDD = 4.5V and 20 mA sink it is 60V maximum low. |+| 23 | VPP | power_in | High-voltage supply, recommended 50V to 250V; the output may not switch below the minimum VPP. |+| 24 | VPP | power_in | High-voltage supply, recommended 50V to 250V; the output may not switch below the minimum VPP. |  ## Key specifications @@ -48,19 +48,18 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Logic Supply Voltage | VDD | -0.5 |  | 6 | V |  | 4 |-| High-Voltage Supply | VPP |  |  | 275 | V | VDD to +275V | 4 |-| Logic Input Levels |  | -0.5 |  | 5.5 | V | -0.5V to VDD +0.5V (max shown for VDD=5V) | 4 |-| Ground Current |  |  |  | 0.3 | A | Connection to all power and ground pads required | 4 |-| High-Voltage Supply Current |  |  |  | 0.25 | A | Connection to all power and ground pads required | 4 |-| Maximum Junction Temperature | TJ(MAX) |  |  | 125 | °C |  | 4 |-| Storage Temperature | TS | -65 |  | 150 | °C |  | 4 |-| Continuous Total Power Dissipation, 24-lead SOW |  |  |  | 750 | mW | Derate linearly to 85°C at 12 mW/°C above 25°C ambient | 4 | | Logic Supply Voltage | VDD | 4.5 | 5 | 5.5 | V |  | 4 |-| High-Voltage Supply Voltage | VPP | 50 |  | 250 | V | Output may not switch below the minimum VPP | 4 |-| High-Level Input Voltage | VIH | -0.9 |  | 5 | V | VDD-0.9V to VDD (min shown as offset from VDD) | 4 |+| High-Voltage Supply Voltage | VPP | 50 |  | 250 | V | Note 1 | 4 | | Low-Level Input Voltage | VIL | 0 |  | 0.9 | V |  | 4 | | Operating Junction Temperature | TJ | -40 |  | 85 | °C |  | 4 |+| Logic Supply Voltage | VDD | -0.5 |  | 6 | V |  | 4 |+| High-Voltage Supply | VPP |  |  | 275 | V |  | 4 |+| Logic Input Levels |  | -0.5 |  |  | V |  | 4 |+| Ground Current |  |  |  | 0.3 | A | Note 1 | 4 |+| High-Voltage Supply Current |  |  |  | 0.25 | A | Note 1 | 4 |+| Maximum Junction Temperature | TJ(MAX) |  |  | 125 | °C |  | 4 |+| Storage Temperature | TS | -65 |  | 150 | °C |  | 4 |+| Continuous Total Power Dissipation, 24-lead SOW |  |  |  | 750 | mW | Note 2 | 4 | | VDD Supply Current | IDD |  |  | 4 | mA | fCLK = 8 MHz, LE = Low | 5 | | Quiescent VDD Supply Current | IDDQ |  |  | 0.1 | mA | All VIN = VDD | 5 | | Quiescent VDD Supply Current | IDDQ |  |  | 2 | mA | All VIN = 0V | 5 |@@ -68,13 +67,11 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Quiescent VPP Supply Voltage | IPPQ |  |  | 100 | µA | VPP = 240V, outputs are static | 5 | | High-Level Logic Input Current | IIH |  |  | 10 | µA | VIH = VDD | 5 | | Low-Level Logic Input Current | IIL |  |  | -10 | µA | VIL = 0V | 5 |-| Low-Level Logic Input Current (pull-up inputs) | IIL |  |  | -350 | µA | VIL = 0V, for inputs with pull-up resistors | 5 |+| Low-Level Logic Input Current, inputs with pull-up resistors | IIL |  |  | -350 | µA | VIL = 0V, for inputs with pull-up resistors | 5 | | High-Level Output HVOUT | VOH | 140 |  |  | V | VPP = 200V, IHVOUT = -20 mA | 5 |-| High-Level Output Data Out | VOH | -1 |  |  | V | IDOUT = -0.1 mA; min is VDD -1V | 5 |+| Data Out (Low-Level Output) | VOL |  |  | 1 | V | IDOUT = -0.1 mA | 5 | | Low-Level Output HVOUT | VOL |  |  | 60 | V | VDD = 4.5V, IHVOUT = 20 mA | 5 |-| Low-Level Output Data Out | VOL |  |  | 1 | V | IDOUT = -0.1 mA | 5 | | Clock Frequency | fCLK | 0 |  | 8 | MHz |  | 5 |-| Output Switching Frequency (SOA Limited) | fOUT |  | 300 |  | Hz | CL = 50 nF, VPP = 200V | 5 | | Clock Width High and Low | tWL, tWH | 62 |  |  | ns |  | 5 | | Data Set-Up Time before Clock Rises | tSU | 15 |  |  | ns |  | 5 | | Data Hold Time after Clock Rises | tH | 30 |  |  | ns |  | 5 |@@ -85,14 +82,11 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Delay Time for Output to Start Rise/Fall | tdON/OFF |  |  | 500 | ns |  | 5 | | Delay Time Clock to Data Low to High | tDLH |  |  | 110 | ns | CL = 15 pF | 5 | | Delay Time Clock to Data High to Low | tDHL |  |  | 110 | ns | CL = 15 pF | 5 |-| All Logic Inputs rise/fall time | tr, tf |  |  | 5 | ns |  | 5 |+| All Logic Inputs Rise/Fall Time | tr, tf |  |  | 5 | ns |  | 5 | | Output Short-Circuit Detection | tSD |  |  | 500 | ns | CL = 15 pF, short to output fall of SHORT | 5 | | Output Short-Circuit Clear | tSC |  |  | 3000 | ns | Short clear to output rise of SHORT | 5 | | Output High-Z State | tHI-Z |  |  | 500 | ns |  | 5 |-| Operating Junction Temperature | TJ | -40 |  | 85 | °C |  | 6 |-| Maximum Junction Temperature | TJ(MAX) |  |  | 125 | °C |  | 6 |-| Storage Temperature | TS | -65 |  | 150 | °C |  | 6 |-| Package Thermal Resistance, 24-lead SOW | θJA |  | 44 |  | °C/W |  | 6 |+| Thermal resistance, junction to ambient, 24-lead SOW | θJA |  | 44 |  | °C/W |  | 6 |  ## CAD (KiCad official) @@ -106,7 +100,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries Data extracted from the manufacturer datasheet, not a distributor listing:  - **Datasheet:** [Microchip Tech datasheet](docs/hv513wg-g-datasheet.pdf) (18 pp, sha256 `5548f5efe1a70740`, retrieved 2026-11-12, tier: manufacturer)-- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).  [Datasheet PDF](docs/hv513wg-g-datasheet.pdf)
hv513wg-g-hero.overlay.json+615−610
@@ -1,612 +1,617 @@ {-  "spec": "adom-hero 1.4",-  "mpn": "HV513WG-G",-  "kind": "component + footprint reference art",-  "board_use": false,-  "plane_z_mm": -0.02,-  "units": "metre",-  "upAxis": "Z",-  "layers": {-    "pad_outlines": {-      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",-      "rgba": [-        0.0,-        0.902,-        0.863,-        0.5-      ],-      "pads": 24,-      "span_mm": 14.57,-      "dash_mm": 0.3642,-      "gap_mm": 0.2186,-      "pad_stroke_mm": 0.0874-    },-    "silkscreen": {-      "material": "Silkscreen reference lines - 30 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.3-      ],-      "footprint_items": 7,-      "pin1": {-        "source": "footprint silkscreen",-        "pad": "1"-      }-    },-    "signal_names": {-      "material": "Signal names - 50 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.5-      ],-      "font": "DejaVu Sans Mono",-      "labels": 24,-      "sides": "top + mirrored underside (single-sided)",-      "fallback_to_pad_number": 0-    }-  },-  "align": {-    "ok": true,-    "centre_offset_mm": 0.0,-    "tolerance_mm": 1.166,-    "orientation_flipped": false,-    "contacts_bbox_mm": [-      -5.15,-      5.15,-      -7.19,-      7.19-    ],-    "pads_bbox_mm": [-      -5.675,-      5.675,-      -7.285,-      7.285-    ],-    "seating_z_mm": -0.0-  },-  "sources": {-    "glb": "hv513wg-g-etched.glb",-    "glb_sha256": "ec3f6cc9bad7a28b07337fe0b9334789a6038f4fd37a6d7db66dee64164fc7ff",-    "footprint": "hv513wg-g.kicad_mod",-    "footprint_sha256": "499be855ffcd749fbc39d91b24052baf2b824c942c7e4ba277e1bd88f7018ee0",-    "pins": "page.json component.pins",-    "pins_sha256": "6fe7203109483946402f86996bd32d792fac33f00b17d9bd112d5d86ae7d8176"-  },-  "generator": "adom-wiki 1.8.22 (component_hero)",-  "labels": [-    {-      "pad": "1",-      "text": "NC",-      "x": -5.825,-      "y": -6.985,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "2",-      "text": "VDD",-      "x": -5.825,-      "y": -5.715,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "3",-      "text": "DOUT",-      "x": -5.825,-      "y": -4.445,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "4",-      "text": "BL",-      "x": -5.825,-      "y": -3.175,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "5",-      "text": "POL",-      "x": -5.825,-      "y": -1.905,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "6",-      "text": "CLK",-      "x": -5.825,-      "y": -0.635,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "7",-      "text": "LE",-      "x": -5.825,-      "y": 0.635,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "8",-      "text": "SHORT",-      "x": -5.825,-      "y": 1.905,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "9",-      "text": "Hi-Z",-      "x": -5.825,-      "y": 3.175,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "10",-      "text": "DIN",-      "x": -5.825,-      "y": 4.445,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "11",-      "text": "LGND",-      "x": -5.825,-      "y": 5.715,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "12",-      "text": "NC",-      "x": -5.825,-      "y": 6.985,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "13",-      "text": "HVGND",-      "x": 5.825,-      "y": 6.985,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "14",-      "text": "HVGND",-      "x": 5.825,-      "y": 5.715,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "15",-      "text": "HVOUT1",-      "x": 5.825,-      "y": 4.445,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "16",-      "text": "HVOUT2",-      "x": 5.825,-      "y": 3.175,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "17",-      "text": "HVOUT3",-      "x": 5.825,-      "y": 1.905,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "18",-      "text": "HVOUT4",-      "x": 5.825,-      "y": 0.635,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "19",-      "text": "HVOUT5",-      "x": 5.825,-      "y": -0.635,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "20",-      "text": "HVOUT6",-      "x": 5.825,-      "y": -1.905,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "21",-      "text": "HVOUT7",-      "x": 5.825,-      "y": -3.175,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "22",-      "text": "HVOUT8",-      "x": 5.825,-      "y": -4.445,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "23",-      "text": "VPP",-      "x": 5.825,-      "y": -5.715,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "24",-      "text": "VPP",-      "x": 5.825,-      "y": -6.985,-      "align": "left",-      "vertical": false,-      "h": 0.6-    }+ "spec": "adom-hero 1.4",+ "mpn": "HV513WG-G",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+  "pad_outlines": {+   "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+   "rgba": [+    0.0,+    0.902,+    0.863,+    0.5+   ],+   "pads": 24,+   "span_mm": 14.57,+   "dash_mm": 0.3643,+   "gap_mm": 0.2185,+   "pad_stroke_mm": 0.0874+  },+  "silkscreen": {+   "material": "Silkscreen reference lines - 30 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.3+   ],+   "footprint_items": 7,+   "pin1": {+    "source": "footprint silkscreen",+    "pad": "1"+   }+  },+  "signal_names": {+   "material": "Signal names - 50 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.5+   ],+   "font": "DejaVu Sans Mono",+   "labels": 24,+   "sides": "top + mirrored underside (single-sided)",+   "omitted": null,+   "fallback_to_pad_number": 0+  }+ },+ "align": {+  "ok": true,+  "board_underside": true,+  "electrical_pads_without_contact": [],+  "mounting_pads_left_out": [],+  "centre_offset_mm": 0.0,+  "over_pads": true,+  "tolerance_mm": 1.166,+  "orientation_flipped": false,+  "contacts_bbox_mm": [+   -5.15,+   5.15,+   -7.19,+   7.19   ],-  "pads": [-    {-      "number": "1",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        -6.985-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "2",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        -5.715-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "3",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        -4.445-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "4",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        -3.175-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "5",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        -1.905-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "6",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        -0.635-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "7",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        0.635-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "8",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        1.905-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "9",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        3.175-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "10",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        4.445-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "11",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        5.715-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "12",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        6.985-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "13",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        6.985-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "14",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        5.715-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "15",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        4.445-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "16",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        3.175-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "17",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        1.905-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "18",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        0.635-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "19",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        -0.635-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "20",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        -1.905-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "21",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        -3.175-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "22",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        -4.445-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "23",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        -5.715-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "24",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        -6.985-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    }-  ]-}+  "pads_bbox_mm": [+   -5.675,+   5.675,+   -7.285,+   7.285+  ],+  "seating_z_mm": -0.0+ },+ "sources": {+  "glb": "hv513wg-g-etched.glb",+  "glb_sha256": "ec3f6cc9bad7a28b07337fe0b9334789a6038f4fd37a6d7db66dee64164fc7ff",+  "footprint": "hv513wg-g.kicad_mod",+  "footprint_sha256": "499be855ffcd749fbc39d91b24052baf2b824c942c7e4ba277e1bd88f7018ee0",+  "pins": "page.json component.pins",+  "pins_sha256": "6fe7203109483946402f86996bd32d792fac33f00b17d9bd112d5d86ae7d8176"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+  {+   "pad": "1",+   "text": "NC",+   "x": -5.825,+   "y": -6.985,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "2",+   "text": "VDD",+   "x": -5.825,+   "y": -5.715,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "3",+   "text": "DOUT",+   "x": -5.825,+   "y": -4.445,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "4",+   "text": "BL",+   "x": -5.825,+   "y": -3.175,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "5",+   "text": "POL",+   "x": -5.825,+   "y": -1.905,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "6",+   "text": "CLK",+   "x": -5.825,+   "y": -0.635,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "7",+   "text": "LE",+   "x": -5.825,+   "y": 0.635,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "8",+   "text": "SHORT",+   "x": -5.825,+   "y": 1.905,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "9",+   "text": "Hi-Z",+   "x": -5.825,+   "y": 3.175,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "10",+   "text": "DIN",+   "x": -5.825,+   "y": 4.445,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "11",+   "text": "LGND",+   "x": -5.825,+   "y": 5.715,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "12",+   "text": "NC",+   "x": -5.825,+   "y": 6.985,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "13",+   "text": "HVGND",+   "x": 5.825,+   "y": 6.985,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "14",+   "text": "HVGND",+   "x": 5.825,+   "y": 5.715,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "15",+   "text": "HVOUT1",+   "x": 5.825,+   "y": 4.445,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "16",+   "text": "HVOUT2",+   "x": 5.825,+   "y": 3.175,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "17",+   "text": "HVOUT3",+   "x": 5.825,+   "y": 1.905,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "18",+   "text": "HVOUT4",+   "x": 5.825,+   "y": 0.635,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "19",+   "text": "HVOUT5",+   "x": 5.825,+   "y": -0.635,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "20",+   "text": "HVOUT6",+   "x": 5.825,+   "y": -1.905,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "21",+   "text": "HVOUT7",+   "x": 5.825,+   "y": -3.175,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "22",+   "text": "HVOUT8",+   "x": 5.825,+   "y": -4.445,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "23",+   "text": "VPP",+   "x": 5.825,+   "y": -5.715,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "24",+   "text": "VPP",+   "x": 5.825,+   "y": -6.985,+   "align": "left",+   "vertical": false,+   "h": 0.6+  }+ ],+ "pads": [+  {+   "number": "1",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    -6.985+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "2",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    -5.715+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "3",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    -4.445+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "4",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    -3.175+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "5",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    -1.905+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "6",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    -0.635+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "7",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    0.635+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "8",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    1.905+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "9",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    3.175+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "10",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    4.445+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "11",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    5.715+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "12",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    6.985+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "13",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    6.985+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "14",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    5.715+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "15",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    4.445+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "16",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    3.175+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "17",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    1.905+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "18",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    0.635+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "19",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    -0.635+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "20",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    -1.905+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "21",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    -3.175+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "22",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    -4.445+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "23",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    -5.715+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "24",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    -6.985+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  }+ ]+}\ No newline at end of file
package.json+29−29
@@ -1,6 +1,6 @@ {   "slug": "hv513wg-g",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "Microchip Tech Registers, SOIC-24-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -54,7 +54,7 @@       "mouser": "689-HV513WG-G"     },     "distributor_check": {-      "checked_at": "2026-11-12T04:55:51Z",+      "checked_at": "2026-11-12T07:58:33Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "HV513WG-GTR-ND",@@ -76,49 +76,49 @@         "number": "2",         "name": "VDD",         "type": "power_in",-        "description": "Logic supply voltage, recommended 4.5V to 5.5V (absolute maximum -0.5V to +6V)."+        "description": "Logic supply voltage, recommended 4.5V to 5.5V (typ. 5V)."       },       {         "number": "3",         "name": "DOUT",         "type": "output",-        "description": "Data output buffer for cascading devices, VOH min VDD-1V at -0.1 mA."+        "description": "Data output buffer for cascading to the next HV513; VOH is VDD-1V minimum at 0.1 mA and VOL is 1V maximum at 0.1 mA."       },       {         "number": "4",         "name": "BL",         "type": "input",-        "description": "Blanking input; a logic low sets all HVOUTs low, with an internal 20 kΩ pull-up resistor."+        "description": "Blanking input with internal 20 kΩ pull-up; a logic low sets all HVOUTs low."       },       {         "number": "5",         "name": "POL",         "type": "input",-        "description": "Polarity bar input logic that selects output polarity, with an internal 20 kΩ pull-up resistor."+        "description": "Active-low polarity input logic with internal 20 kΩ pull-up resistor."       },       {         "number": "6",         "name": "CLK",         "type": "input",-        "description": "Clock input; the shift register shifts data on the rising edge, up to 8 MHz."+        "description": "Clock input; shift register shifts data on the low-to-high transition, up to 8 MHz at VDD = 5V."       },       {         "number": "7",         "name": "LE",         "type": "input",-        "description": "Latch enable bar input logic; data transfers from shift register to latches when high and is stored when low, with an internal 20 kΩ pull-up resistor."+        "description": "Active-low latch enable input with internal 20 kΩ pull-up; the latch stores data when LE is low and transfers the shift register to the latch when high."       },       {         "number": "8",         "name": "SHORT",         "type": "output",-        "description": "Short-circuit detect output; a logic 0 is asserted if an output does not reach its required state."+        "description": "Short-circuit detect output that goes to logic 0 if an output does not reach its required state; it pulses low during normal output transitions."       },       {         "number": "9",         "name": "Hi-Z",         "type": "input",-        "description": "High-impedance control; a logic input low sets all outputs in a high-impedance state, with an internal 20 kΩ pull-up resistor."+        "description": "High-impedance control input with internal 20 kΩ pull-up; a logic low sets all outputs to a high-impedance state."       },       {         "number": "10",@@ -130,7 +130,7 @@         "number": "11",         "name": "LGND",         "type": "power_in",-        "description": "Low-voltage (logic) ground."+        "description": "Low-voltage ground."       },       {         "number": "12",@@ -142,73 +142,73 @@         "number": "13",         "name": "HVGND",         "type": "power_in",-        "description": "High-voltage ground; connection to all power and ground pins is required."+        "description": "High-voltage ground; connection to all power and ground pads is required."       },       {         "number": "14",         "name": "HVGND",         "type": "power_in",-        "description": "High-voltage ground; connection to all power and ground pins is required."+        "description": "High-voltage ground; connection to all power and ground pads is required."       },       {         "number": "15",         "name": "HVOUT1",         "type": "output",-        "description": "High-voltage push-pull output, up to 250V."+        "description": "High-voltage push-pull output; with VPP = 200V and 20 mA source it sits at 140V minimum high, and with VDD = 4.5V and 20 mA sink it is 60V maximum low."       },       {         "number": "16",         "name": "HVOUT2",         "type": "output",-        "description": "High-voltage push-pull output, up to 250V."+        "description": "High-voltage push-pull output; with VPP = 200V and 20 mA source it sits at 140V minimum high, and with VDD = 4.5V and 20 mA sink it is 60V maximum low."       },       {         "number": "17",         "name": "HVOUT3",         "type": "output",-        "description": "High-voltage push-pull output, up to 250V."+        "description": "High-voltage push-pull output; with VPP = 200V and 20 mA source it sits at 140V minimum high, and with VDD = 4.5V and 20 mA sink it is 60V maximum low."       },       {         "number": "18",         "name": "HVOUT4",         "type": "output",-        "description": "High-voltage push-pull output, up to 250V."+        "description": "High-voltage push-pull output; with VPP = 200V and 20 mA source it sits at 140V minimum high, and with VDD = 4.5V and 20 mA sink it is 60V maximum low."       },       {         "number": "19",         "name": "HVOUT5",         "type": "output",-        "description": "High-voltage push-pull output, up to 250V."+        "description": "High-voltage push-pull output; with VPP = 200V and 20 mA source it sits at 140V minimum high, and with VDD = 4.5V and 20 mA sink it is 60V maximum low."       },       {         "number": "20",         "name": "HVOUT6",         "type": "output",-        "description": "High-voltage push-pull output, up to 250V."+        "description": "High-voltage push-pull output; with VPP = 200V and 20 mA source it sits at 140V minimum high, and with VDD = 4.5V and 20 mA sink it is 60V maximum low."       },       {         "number": "21",         "name": "HVOUT7",         "type": "output",-        "description": "High-voltage push-pull output, up to 250V."+        "description": "High-voltage push-pull output; with VPP = 200V and 20 mA source it sits at 140V minimum high, and with VDD = 4.5V and 20 mA sink it is 60V maximum low."       },       {         "number": "22",         "name": "HVOUT8",         "type": "output",-        "description": "High-voltage push-pull output, up to 250V."+        "description": "High-voltage push-pull output; with VPP = 200V and 20 mA source it sits at 140V minimum high, and with VDD = 4.5V and 20 mA sink it is 60V maximum low."       },       {         "number": "23",         "name": "VPP",         "type": "power_in",-        "description": "High-voltage supply, recommended 50V to 250V (absolute maximum 275V)."+        "description": "High-voltage supply, recommended 50V to 250V; the output may not switch below the minimum VPP."       },       {         "number": "24",         "name": "VPP",         "type": "power_in",-        "description": "High-voltage supply, recommended 50V to 250V (absolute maximum 275V)."+        "description": "High-voltage supply, recommended 50V to 250V; the output may not switch below the minimum VPP."       }     ],     "provenance": {@@ -216,17 +216,17 @@       "factory_chain": {         "factory": "2.0.0",         "extractor": "extract_pins 0.3",-        "primary_model": "claude-sonnet-5-5",+        "primary_model": "claude-haiku-5-5",         "primary_mode": "text",         "consensus_model": "claude-sonnet-5-5",         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: Datasheet names the package 24-lead SOW (wide body, 7.50 mm body width, MS-013); the SOIC-24-300mil ; Pin types for DOUT and SHORT are inferred from the descriptions (data output, flag asserted low); th"+          "extractor flagged: Datasheet lists these pins as no connection (NC) in the 24-lead SOW table; typed as unconnected.; Datasheet does not state whether SHORT is push-pull or open-drain; typed as output based on its logi; DOUT limits are given only as VOH/VOL at ±0.1 mA; VDD–1V and 1V values are quoted from the DC table."         ],         "pages_sent": 18,-        "cost_usd": 0.1362,-        "at": "2026-11-12T04:55:27"+        "cost_usd": 0.0738,+        "at": "2026-11-12T07:58:04"       },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/883e10431043329bbc4eb9583f5220fa.pdf",@@ -281,13 +281,13 @@         "zmin_mm": -0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "3e8ca57f3e48305f54772e7bd0090e3f9ca2a68fc0ed1fb97278c2dedd4738af",+        "sha256": "b89cc7034c99e176a1cfb3b8000ff2e63268dabaa384b8ab578b30cc87f1b8f2",         "checked": "2026-11-12",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],     "package_dims": {-      "package_code": "WG",+      "package_code": "WG (24-Lead SOW)",       "source_page": 13,       "D": {         "nom_mm": 15.4,
page.json+32−30
@@ -4,7 +4,7 @@   "slug": "hv513wg-g",   "title": "HV513WG-G",   "brief": "Microchip Tech Registers, SOIC-24-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.1.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -36,7 +36,7 @@       "mouser": "689-HV513WG-G"     },     "distributor_check": {-      "checked_at": "2026-11-12T04:55:51Z",+      "checked_at": "2026-11-12T07:58:33Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "HV513WG-GTR-ND",@@ -58,49 +58,49 @@         "number": "2",         "name": "VDD",         "type": "power_in",-        "description": "Logic supply voltage, recommended 4.5V to 5.5V (absolute maximum -0.5V to +6V)."+        "description": "Logic supply voltage, recommended 4.5V to 5.5V (typ. 5V)."       },       {         "number": "3",         "name": "DOUT",         "type": "output",-        "description": "Data output buffer for cascading devices, VOH min VDD-1V at -0.1 mA."+        "description": "Data output buffer for cascading to the next HV513; VOH is VDD-1V minimum at 0.1 mA and VOL is 1V maximum at 0.1 mA."       },       {         "number": "4",         "name": "BL",         "type": "input",-        "description": "Blanking input; a logic low sets all HVOUTs low, with an internal 20 kΩ pull-up resistor."+        "description": "Blanking input with internal 20 kΩ pull-up; a logic low sets all HVOUTs low."       },       {         "number": "5",         "name": "POL",         "type": "input",-        "description": "Polarity bar input logic that selects output polarity, with an internal 20 kΩ pull-up resistor."+        "description": "Active-low polarity input logic with internal 20 kΩ pull-up resistor."       },       {         "number": "6",         "name": "CLK",         "type": "input",-        "description": "Clock input; the shift register shifts data on the rising edge, up to 8 MHz."+        "description": "Clock input; shift register shifts data on the low-to-high transition, up to 8 MHz at VDD = 5V."       },       {         "number": "7",         "name": "LE",         "type": "input",-        "description": "Latch enable bar input logic; data transfers from shift register to latches when high and is stored when low, with an internal 20 kΩ pull-up resistor."+        "description": "Active-low latch enable input with internal 20 kΩ pull-up; the latch stores data when LE is low and transfers the shift register to the latch when high."       },       {         "number": "8",         "name": "SHORT",         "type": "output",-        "description": "Short-circuit detect output; a logic 0 is asserted if an output does not reach its required state."+        "description": "Short-circuit detect output that goes to logic 0 if an output does not reach its required state; it pulses low during normal output transitions."       },       {         "number": "9",         "name": "Hi-Z",         "type": "input",-        "description": "High-impedance control; a logic input low sets all outputs in a high-impedance state, with an internal 20 kΩ pull-up resistor."+        "description": "High-impedance control input with internal 20 kΩ pull-up; a logic low sets all outputs to a high-impedance state."       },       {         "number": "10",@@ -112,7 +112,7 @@         "number": "11",         "name": "LGND",         "type": "power_in",-        "description": "Low-voltage (logic) ground."+        "description": "Low-voltage ground."       },       {         "number": "12",@@ -124,73 +124,73 @@         "number": "13",         "name": "HVGND",         "type": "power_in",-        "description": "High-voltage ground; connection to all power and ground pins is required."+        "description": "High-voltage ground; connection to all power and ground pads is required."       },       {         "number": "14",         "name": "HVGND",         "type": "power_in",-        "description": "High-voltage ground; connection to all power and ground pins is required."+        "description": "High-voltage ground; connection to all power and ground pads is required."       },       {         "number": "15",         "name": "HVOUT1",         "type": "output",-        "description": "High-voltage push-pull output, up to 250V."+        "description": "High-voltage push-pull output; with VPP = 200V and 20 mA source it sits at 140V minimum high, and with VDD = 4.5V and 20 mA sink it is 60V maximum low."       },       {         "number": "16",         "name": "HVOUT2",         "type": "output",-        "description": "High-voltage push-pull output, up to 250V."+        "description": "High-voltage push-pull output; with VPP = 200V and 20 mA source it sits at 140V minimum high, and with VDD = 4.5V and 20 mA sink it is 60V maximum low."       },       {         "number": "17",         "name": "HVOUT3",         "type": "output",-        "description": "High-voltage push-pull output, up to 250V."+        "description": "High-voltage push-pull output; with VPP = 200V and 20 mA source it sits at 140V minimum high, and with VDD = 4.5V and 20 mA sink it is 60V maximum low."       },       {         "number": "18",         "name": "HVOUT4",         "type": "output",-        "description": "High-voltage push-pull output, up to 250V."+        "description": "High-voltage push-pull output; with VPP = 200V and 20 mA source it sits at 140V minimum high, and with VDD = 4.5V and 20 mA sink it is 60V maximum low."       },       {         "number": "19",         "name": "HVOUT5",         "type": "output",-        "description": "High-voltage push-pull output, up to 250V."+        "description": "High-voltage push-pull output; with VPP = 200V and 20 mA source it sits at 140V minimum high, and with VDD = 4.5V and 20 mA sink it is 60V maximum low."       },       {         "number": "20",         "name": "HVOUT6",         "type": "output",-        "description": "High-voltage push-pull output, up to 250V."+        "description": "High-voltage push-pull output; with VPP = 200V and 20 mA source it sits at 140V minimum high, and with VDD = 4.5V and 20 mA sink it is 60V maximum low."       },       {         "number": "21",         "name": "HVOUT7",         "type": "output",-        "description": "High-voltage push-pull output, up to 250V."+        "description": "High-voltage push-pull output; with VPP = 200V and 20 mA source it sits at 140V minimum high, and with VDD = 4.5V and 20 mA sink it is 60V maximum low."       },       {         "number": "22",         "name": "HVOUT8",         "type": "output",-        "description": "High-voltage push-pull output, up to 250V."+        "description": "High-voltage push-pull output; with VPP = 200V and 20 mA source it sits at 140V minimum high, and with VDD = 4.5V and 20 mA sink it is 60V maximum low."       },       {         "number": "23",         "name": "VPP",         "type": "power_in",-        "description": "High-voltage supply, recommended 50V to 250V (absolute maximum 275V)."+        "description": "High-voltage supply, recommended 50V to 250V; the output may not switch below the minimum VPP."       },       {         "number": "24",         "name": "VPP",         "type": "power_in",-        "description": "High-voltage supply, recommended 50V to 250V (absolute maximum 275V)."+        "description": "High-voltage supply, recommended 50V to 250V; the output may not switch below the minimum VPP."       }     ],     "provenance": {@@ -198,17 +198,17 @@       "factory_chain": {         "factory": "2.0.0",         "extractor": "extract_pins 0.3",-        "primary_model": "claude-sonnet-5-5",+        "primary_model": "claude-haiku-5-5",         "primary_mode": "text",         "consensus_model": "claude-sonnet-5-5",         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: Datasheet names the package 24-lead SOW (wide body, 7.50 mm body width, MS-013); the SOIC-24-300mil ; Pin types for DOUT and SHORT are inferred from the descriptions (data output, flag asserted low); th"+          "extractor flagged: Datasheet lists these pins as no connection (NC) in the 24-lead SOW table; typed as unconnected.; Datasheet does not state whether SHORT is push-pull or open-drain; typed as output based on its logi; DOUT limits are given only as VOH/VOL at ±0.1 mA; VDD–1V and 1V values are quoted from the DC table."         ],         "pages_sent": 18,-        "cost_usd": 0.1362,-        "at": "2026-11-12T04:55:27"+        "cost_usd": 0.0738,+        "at": "2026-11-12T07:58:04"       },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/883e10431043329bbc4eb9583f5220fa.pdf",@@ -263,13 +263,13 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "3e8ca57f3e48305f54772e7bd0090e3f9ca2a68fc0ed1fb97278c2dedd4738af",+        "sha256": "b89cc7034c99e176a1cfb3b8000ff2e63268dabaa384b8ab578b30cc87f1b8f2",         "checked": "2026-11-12",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],     "package_dims": {-      "package_code": "WG",+      "package_code": "WG (24-Lead SOW)",       "source_page": 13,       "D": {         "nom_mm": 15.4,@@ -911,5 +911,7 @@   ],   "visibility": {     "public": true-  }+  },+  "description": "Microchip Tech Registers, SOIC-24-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file