main
History Download
Ray Publish 0.1.0 a801bf4

HV2901K6-G

Microchip Tech · Analog Switches, Multiplexers · QFN-64-EP(9x9)

HV2901K6-G from Microchip Tech, in a QFN-64-EP(9x9). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SW30 passive Analog switch 30 terminal; the analog signal must stay between VNN and VPP.
2 Y3031 passive Common terminal shared by analog switches 30 and 31; the analog signal must stay between VNN and VPP.
3 SW31 passive Analog switch 31 terminal; the analog signal must stay between VNN and VPP.
4 NC unconnected No connection.
5 CLR input Clear logic input; it overrides all other inputs and opens all switches when high, and logic inputs accept 3.3 V or 5 V CMOS levels (VIH min 0.9×VDD, VIL max 0.1×VDD).
6 NC unconnected No connection.
7 LE input Latch-enable logic input, active low; the logic input accepts 3.3 V or 5 V CMOS levels (VIH min 0.9×VDD, VIL max 0.1×VDD).
8 CLK input Clock logic input for the shift register, with data clocked in on the rising edge; the maximum clock frequency is 20 MHz at VDD = 5 V and 8 MHz at VDD = 3 V.
9 VDD power_in Logic supply voltage, 3 V to 5.5 V.
10 DIN input Serial data input to the 32-bit shift register; the logic input accepts 3.3 V or 5 V CMOS levels (VIH min 0.9×VDD, VIL max 0.1×VDD).
11 GND power_in Ground reference for the logic circuitry.
12 DOUT output Serial data output of the shift register; it is high when register bit 31 is high.
13 NC unconnected No connection.
14 SW0 passive Analog switch 0 terminal; the analog signal must stay between VNN and VPP.
15 Y01 passive Common terminal shared by analog switches 0 and 1; the analog signal must stay between VNN and VPP.
16 SW1 passive Analog switch 1 terminal; the analog signal must stay between VNN and VPP.
17 SW2 passive Analog switch 2 terminal; the analog signal must stay between VNN and VPP.
18 Y23 passive Common terminal shared by analog switches 2 and 3; the analog signal must stay between VNN and VPP.
19 SW3 passive Analog switch 3 terminal; the analog signal must stay between VNN and VPP.
20 SW4 passive Analog switch 4 terminal; the analog signal must stay between VNN and VPP.
21 Y45 passive Common terminal shared by analog switches 4 and 5; the analog signal must stay between VNN and VPP.
22 SW5 passive Analog switch 5 terminal; the analog signal must stay between VNN and VPP.
23 SW6 passive Analog switch 6 terminal; the analog signal must stay between VNN and VPP.
24 Y67 passive Common terminal shared by analog switches 6 and 7; the analog signal must stay between VNN and VPP.
25 SW7 passive Analog switch 7 terminal; the analog signal must stay between VNN and VPP.
26 SW8 passive Analog switch 8 terminal; the analog signal must stay between VNN and VPP.
27 Y89 passive Common terminal shared by analog switches 8 and 9; the analog signal must stay between VNN and VPP.
28 SW9 passive Analog switch 9 terminal; the analog signal must stay between VNN and VPP.
29 SW10 passive Analog switch 10 terminal; the analog signal must stay between VNN and VPP.
30 Y1011 passive Common terminal shared by analog switches 10 and 11; the analog signal must stay between VNN and VPP.
31 SW11 passive Analog switch 11 terminal; the analog signal must stay between VNN and VPP.
32 SW12 passive Analog switch 12 terminal; the analog signal must stay between VNN and VPP.
33 Y1213 passive Common terminal shared by analog switches 12 and 13; the analog signal must stay between VNN and VPP.
34 SW13 passive Analog switch 13 terminal; the analog signal must stay between VNN and VPP.
35 VPP power_in Positive high-voltage supply, +40 V to VNN+200 V, with VPP-VNN not exceeding 220 V.
36 RGND power_in Ground return for the HV2901 output bleed resistors (20 to 50 kΩ); this pin is NC on the HV2801.
37 VNN power_in Negative high-voltage supply, -160 V to -40 V.
38 SW14 passive Analog switch 14 terminal; the analog signal must stay between VNN and VPP.
39 Y1415 passive Common terminal shared by analog switches 14 and 15; the analog signal must stay between VNN and VPP.
40 SW15 passive Analog switch 15 terminal; the analog signal must stay between VNN and VPP.
41 SW16 passive Analog switch 16 terminal; the analog signal must stay between VNN and VPP.
42 Y1617 passive Common terminal shared by analog switches 16 and 17; the analog signal must stay between VNN and VPP.
43 SW17 passive Analog switch 17 terminal; the analog signal must stay between VNN and VPP.
44 VNN power_in Negative high-voltage supply, -160 V to -40 V.
45 RGND power_in Ground return for the HV2901 output bleed resistors (20 to 50 kΩ); this pin is NC on the HV2801.
46 VPP power_in Positive high-voltage supply, +40 V to VNN+200 V, with VPP-VNN not exceeding 220 V.
47 SW18 passive Analog switch 18 terminal; the analog signal must stay between VNN and VPP.
48 Y1819 passive Common terminal shared by analog switches 18 and 19; the analog signal must stay between VNN and VPP.
49 SW19 passive Analog switch 19 terminal; the analog signal must stay between VNN and VPP.
50 SW20 passive Analog switch 20 terminal; the analog signal must stay between VNN and VPP.
51 Y2021 passive Common terminal shared by analog switches 20 and 21; the analog signal must stay between VNN and VPP.
52 SW21 passive Analog switch 21 terminal; the analog signal must stay between VNN and VPP.
53 SW22 passive Analog switch 22 terminal; the analog signal must stay between VNN and VPP.
54 Y2223 passive Common terminal shared by analog switches 22 and 23; the analog signal must stay between VNN and VPP.
55 SW23 passive Analog switch 23 terminal; the analog signal must stay between VNN and VPP.
56 SW24 passive Analog switch 24 terminal; the analog signal must stay between VNN and VPP.
57 Y2425 passive Common terminal shared by analog switches 24 and 25; the analog signal must stay between VNN and VPP.
58 SW25 passive Analog switch 25 terminal; the analog signal must stay between VNN and VPP.
59 SW26 passive Analog switch 26 terminal; the analog signal must stay between VNN and VPP.
60 Y2627 passive Common terminal shared by analog switches 26 and 27; the analog signal must stay between VNN and VPP.
61 SW27 passive Analog switch 27 terminal; the analog signal must stay between VNN and VPP.
62 SW28 passive Analog switch 28 terminal; the analog signal must stay between VNN and VPP.
63 Y2829 passive Common terminal shared by analog switches 28 and 29; the analog signal must stay between VNN and VPP.
64 SW29 passive Analog switch 29 terminal; the analog signal must stay between VNN and VPP.
65 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package QFN-64-EP(9x9)
Category Interface
Pins 65

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Logic Power Supply Voltage VDD -0.5 6.5 V 3
Differential Supply Voltage VPP-VNN 220 V 3
High-Voltage Positive Supply VPP -0.5 V 3
High-Voltage Negative Supply VNN -200 0.5 V 3
Logic Input Voltage -0.5 V 3
Peak Analog Signal Current per Channel 3 A 3
Storage Temperature TS -65 150 °C 3
Power Dissipation, 64-lead QFN 1.5 W 3
Logic Power Supply Voltage VDD 3 5.5 V Note 1, Note 3 3
High-Voltage Positive Supply VPP 40 V Note 1, Note 3 3
High-Voltage Negative Supply VNN -160 -40 V Note 1, Note 3 3
Low-Level Input Voltage VIL 0 V 3
Operating Ambient Temperature TA 0 70 °C 7
Small Signal Switch On-Resistance RONS 26 38 Ω +25°C; ISIG = 5 mA, VPP = +40V, VNN = -160V 4
Small Signal Switch On-Resistance RONS 22 27 Ω +25°C; ISIG = 200 mA, VPP = +40V, VNN = -160V 4
Small Signal Switch On-Resistance RONS 18 24 Ω +25°C; ISIG = 200 mA, VPP = +100V, VNN = -100V 4
Small Signal Switch On-Resistance RONS 20 25 Ω +25°C; ISIG = 5 mA, VPP = +160V, VNN = -40V 4
Small Signal Switch On-Resistance RONS 16 25 Ω +25°C; ISIG = 200 mA, VPP = +160V, VNN = -40V 4
Small Signal Switch On-Resistance Matching ΔRONS 5 20 % +25°C; ISIG = 5 mA, VPP = +100V, VNN = -100V 4
Output Bleed Resistor (HV2901 only) RINT 20 35 50 kΩ +25°C; Output Switch to RGND, IRINT = 0.5 mA 4
Switch-Off Leakage per Switch ISOL 1 10 μA +25°C; VSIG = VPP-10V, VNN +10V 4
DC Offset Switch Off VOS 100 300 mV +25°C; No load (For HV2901) 4
DC Offset Switch On VOS 100 500 mV +25°C; No load (For HV2901) 4
Quiescent VPP Supply Current, all switches off IPPQ 10 50 μA +25°C; All switches off 4
Quiescent VNN Supply Current, all switches off INNQ -10 -50 μA +25°C; All switches off 4
Quiescent VPP Supply Current, all switches on IPPQ 10 50 μA +25°C; All switches on, ISW = 5 mA 4
Quiescent VNN Supply Current, all switches on INNQ -10 -50 μA +25°C; All switches on, ISW = 5 mA 4
Switch Output Peak Current ISW 3 2 A +25°C; VSIG duty cycle < 0.1% 4
Output Switching Frequency fSW 50 kHz +25°C; Duty cycle = 50% 4
Average VPP Supply Current IPP 20 mA +25°C; VPP = +40V, VNN = -160V; 50 kHz switching, no load 4
Average VPP Supply Current IPP 14 mA +25°C; VPP = +100V, VNN = -100V; 50 kHz switching, no load 4
Average VNN Supply Current INN 20 mA +25°C; VPP = +40V, VNN = -160V; 50 kHz switching, no load 4
Average VNN Supply Current INN 14 mA +25°C; VPP = +100V, VNN = -100V; 50 kHz switching, no load 4
Average VDD Supply Current IDD 8 mA +25°C; fCLK = 5 MHz, VDD = 5V 5
Quiescent VDD Supply Current IDDQ 10 μA +25°C; All logic inputs are static 5
Data Out Source Current ISOR 0.45 0.7 mA +25°C; VOUT = VDD-0.7V 5
Data Out Sink Current ISINK 0.45 0.7 mA +25°C; VOUT = 0.7V 5
Logic Input Capacitance CIN 10 pF +25°C 5
Set-Up Time Before LE Rises tSD 25 ns +25°C; VDD = 5V, tr = tf ≤ 5 ns, CLOAD = 20 pF (table note) 5
Time Width of LE tWLE 56 ns +25°C; VDD = 3V 5
Time Width of LE tWLE 12 ns +25°C; VDD = 5V 5
Clock Delay Time to Data Out tDO 8 19 40 ns +25°C; VDD = 3V 5
Clock Delay Time to Data Out tDO 8 15 30 ns +25°C; VDD = 5V 5
Time Width of CLR tWCLR 55 ns +25°C 5
Set-Up Time Data to Clock tSU 21 ns +25°C; VDD = 3V 5
Set-Up Time Data to Clock tSU 7 ns +25°C; VDD = 5V 5
Hold Time Data from Clock tH 5 ns +25°C; VDD = 3V 5
Hold Time Data from Clock tH 7 ns +25°C; VDD = 5V 5
Clock Frequency fCLK 8 MHz +25°C; VDD = 3V 5
Clock Frequency fCLK 20 MHz +25°C; VDD = 5V 5
Clock Rise and Fall Times tr, tf 50 ns +25°C 5
Turn-On Time tON 5 μs +25°C; VSIG = VPP-10V, RLOAD = 10 kΩ 5
Turn-Off Time tOFF 5 μs +25°C; VSIG = VPP-10V, RLOAD = 10 kΩ 5
Maximum VSIG Slew Rate dv/dt 20 V/ns +25°C; VPP = +40V, VNN = -160V 5
Package Thermal Resistance, 64-lead QFN JA 21 °C/W 7

CAD (KiCad official)

  • Symbol: HV2901K6-G
  • Footprint: Package_DFN_QFN:QFN-64-1EP_9x9mm_P0.5mm_EP6x6mm
  • 3D model: QFN-64-EP(9x9) (KiCad packages3D, STEP)
  • 3D model files: hv2901k6-g-etched.step / hv2901k6-g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hv2901k6-g.step / hv2901k6-g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (20 pp, sha256 08858e659e6260c4, retrieved 2026-10-18, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF