# HV1E567M0810PZ

**Honor Elec** · Polymer Aluminum Capacitors · CP_Elec_8x10.5

HV1E567M0810PZ from Honor Elec, in a CP_Elec_8x10.5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | + | passive | Positive terminal (pad 1 of the CP_ footprint; symbol and 3D mark the + end). |
| 2 | - | passive | Negative terminal. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Honor Elec |
| Package | CP_Elec_8x10.5 |
| Category | Capacitors |
| Pins | 2 |

## Electrical characteristics

Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).

| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Capacitance tolerance (M = ±20%) |  | -20 |  | 20 | % | 120Hz, +20°C | 1 |
| Leakage current (≤0.2CV) | LC |  |  | 2800 | µA | +20°C, 2 min after rated voltage applied | 2 |
| Dissipation factor tanδ | tanδ |  |  | 0.12 |  | 20°C, 120Hz | 2 |
| ESR | ESR |  |  | 28 | mΩ | 20°C, 100kHz | 2 |
| Rated ripple current |  |  |  | 3050 | mArms | 105°C, 100kHz | 2 |
| Rated working voltage |  |  |  | 25 | V | DC voltage plus peak AC voltage must not exceed rated voltage; no reverse charging | 10 |
| Surge voltage |  |  |  | 28.8 | V | 105°C; surge DC voltage with 1000Ω series resistor, 1000 charge/discharge cycles | 11 |
| Operating temperature range |  | -55 |  | 105 | °C |  | 1 |
| Capacitance change after endurance |  | -20 |  | 20 | % | 105°C, 2000 h at rated voltage; relative to value before test | 1 |
| ESR after endurance | ESR |  |  | 150 | % of specified value | 105°C, 2000 h at rated voltage | 1 |
| Dissipation factor after endurance | tanδ |  |  | 150 | % of specified value | 105°C, 2000 h at rated voltage | 1 |
| Capacitance change after moisture resistance |  | -20 |  | 20 | % | 60°C, RH 90-95%, 2000 h; relative to value before test | 1 |
| ESR after moisture resistance | ESR |  |  | 150 | % of specified value | 60°C, RH 90-95%, 2000 h | 1 |
| Dissipation factor after moisture resistance | tanδ |  |  | 150 | % of specified value | 60°C, RH 90-95%, 2000 h | 1 |
| ESR ratio at low temperature | Z(-55℃)/Z(20℃) |  |  | 2.5 |  | -55°C±3°C, 2 h storage step | 12 |
| ESR ratio at high temperature | Z(+105℃)/Z(20℃) |  |  | 1.25 |  | 105°C±3°C, 2 h storage step | 12 |
| Leakage current ratio at high temperature | LC(105℃)/LC(SPEC) |  |  | 12.5 |  | 105°C±3°C, 2 h storage step; LC(SPEC) = initial specified value | 12 |
| Capacitance change after vibration |  | -5 |  | 5 | % | 10-55 Hz, 0.75 mm amplitude, 2 h per direction (X, Y, Z); relative to initial value | 13 |
| Capacitance change after solder heat resistance |  | -5 |  | 5 | % | Solder bath 260±5°C 10±1 s or iron 400±10°C 3+1/-0 s; relative to initial value | 14 |
| Reflow peak temperature |  |  |  | 255 | °C | Lead-free reflow, ≤30 s at 230-255°C | 14 |
| Storage temperature |  |  |  | 35 | °C | Storage at normal temperature, humidity below 75%RH | 19 |
| Rated capacitance | C |  | 560 |  | µF | 120Hz, +20°C | 3 |

## Materials and finish

As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).

| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts |  | tin | pins have no broken and loose 12> 可焊性试验 Solderability test 焊料： 约 25%松香/乙醇溶液，焊料 Sn-Ag-Cu | 13 |

## CAD (KiCad official)

- Symbol: `HV1E567M0810PZ`
- Footprint: `Capacitor_SMD:CP_Elec_8x10.5`
- 3D model: CP_Elec_8x10.5 (KiCad packages3D, STEP)
- 3D model files: `hv1e567m0810pz-etched.step` / `hv1e567m0810pz-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hv1e567m0810pz.step` / `hv1e567m0810pz.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Honor Elec datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8757305667776319488) (20 pp, sha256 `86964f0a7151ff28`, retrieved 2026-11-06, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins`, primary `two-terminal convention` (convention), consensus `off` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/hv1e567m0810pz-datasheet.pdf)