# HV0E567M0605PZ

**Honor Elec** · Polymer Aluminum Capacitors · CP_Elec_6.3x5.8

HV0E567M0605PZ from Honor Elec, in a CP_Elec_6.3x5.8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | + | passive | Positive terminal (pad 1 of the CP_ footprint; symbol and 3D mark the + end). |
| 2 | - | passive | Negative terminal. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Honor Elec |
| Package | CP_Elec_6.3x5.8 |
| Category | Capacitors |
| Pins | 2 |

## Electrical characteristics

Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).

| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Capacitance tolerance (code M) |  | -20 |  | 20 | % | 120Hz, +20°C | 1 |
| Leakage current (max) | LC |  |  | 500 | µA | 20°C, rated voltage applied, 2 minutes | 2 |
| Dissipation factor (max) | tanδ |  |  | 0.1 | % | 20°C, 120Hz | 2 |
| ESR (max) | ESR |  |  | 25 | mΩ | 20°C, 100kHz | 2 |
| Rated ripple current (max) | RC |  |  | 2600 | mArms | 105°C, 100kHz | 2 |
| Operating temperature range |  | -55 |  | 105 | °C |  | 1 |
| Rated working voltage | WV |  |  | 2.5 | V | DC plus peak AC must not exceed rated voltage | 10 |
| Surge voltage |  |  |  | 2.9 | V | 105°C; 1000Ω series; 30 s charge / 5 min discharge; 1000 cycles | 11 |
| Negative ripple voltage (max reverse) |  | -10 |  |  | % of rated voltage | DC voltage low; negative ripple peak | 17 |
| Transient reverse voltage (max) |  | -20 |  |  | % of rated voltage | transient at power source cut-off | 17 |
| Reflow peak temperature (max) |  |  |  | 255 | °C | lead-free reflow peak | 14 |
| Reflow time at peak (max) |  |  |  | 30 | s | at 255°C peak | 14 |
| Preheat temperature (max) |  |  |  | 200 | °C | preheat, ≤90 s | 14 |
| Endurance capacitance change |  | -20 |  | 20 | % | 105°C, 2000 h at rated voltage | 1 |
| Endurance dissipation factor (max) | tanδ |  |  | 150 | % of specified value | 105°C, 2000 h at rated voltage | 1 |
| Endurance ESR (max) | ESR |  |  | 150 | % of specified value | 105°C, 2000 h at rated voltage | 1 |
| Endurance leakage current (max) | LC |  |  | 100 | % of specified value | 105°C, 2000 h at rated voltage | 1 |
| Moisture resistance capacitance change |  | -20 |  | 20 | % | 60°C, RH 90-95%, 2000 h | 1 |
| Moisture resistance dissipation factor (max) | tanδ |  |  | 150 | % of specified value | 60°C, RH 90-95%, 2000 h | 1 |
| Moisture resistance ESR (max) | ESR |  |  | 150 | % of specified value | 60°C, RH 90-95%, 2000 h | 1 |
| Moisture resistance leakage current (max) | LC |  |  | 100 | % of specified value | 60°C, RH 90-95%, 2000 h | 1 |
| ESR ratio Z(-55°C)/Z(20°C) (max) | Z |  |  | 2.5 |  | -55°C, 2 h storage step | 12 |
| ESR ratio Z(105°C)/Z(20°C) (max) | Z |  |  | 1.25 |  | 105°C, 2 h storage step | 12 |
| Leakage ratio LC(105°C)/LC(SPEC) (max) | LC |  |  | 12.5 |  | 105°C, 2 h storage step | 12 |
| Vibration capacitance change |  | -5 |  | 5 | % | 10-55 Hz, X/Y/Z, 2 h per direction | 13 |
| Solder heat capacitance change |  | -5 |  | 5 | % | solder bath 260°C 10 s or iron 400°C 3 s | 14 |
| Storage temperature (max) |  |  |  | 35 | °C | normal temperature storage, original packaging | 19 |
| Storage relative humidity (max) |  |  |  | 75 | %RH | normal humidity storage | 19 |
| Rated capacitance | C |  | 560 |  | µF | 120Hz, 20°C | 2 |

## Materials and finish

As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).

| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts |  | tin | pins have no broken and loose 12> 可焊性试验 Solderability test 焊料： 约 25%松香/乙醇溶液，焊料 Sn-Ag-Cu | 13 |

## CAD (KiCad official)

- Symbol: `HV0E567M0605PZ`
- Footprint: `Capacitor_SMD:CP_Elec_6.3x5.8`
- 3D model: CP_Elec_6.3x5.8 (KiCad packages3D, STEP)
- 3D model files: `hv0e567m0605pz-etched.step` / `hv0e567m0605pz-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hv0e567m0605pz.step` / `hv0e567m0605pz.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Honor Elec datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8757305659346309120) (20 pp, sha256 `86964f0a7151ff28`, retrieved 2026-11-06, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins`, primary `two-terminal convention` (convention), consensus `off` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/hv0e567m0605pz-datasheet.pdf)