main
History Download
Ray Publish 0.1.0 9ca0f87

HTPS76330DBVR

HXY MOSFET · Linear Voltage Regulators (LDO) · SOT-23-5L

HTPS76330DBVR from HXY MOSFET, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VIN power_in Power input pin, accepting 3.0V to 10V (absolute maximum -0.3 to +12V).
2 GND power_in Ground pin.
3 CE input ON/OFF enable control input that puts the circuit into sleep mode when disabled.
4 NC unconnected No connect pin with no internal function.
5 VOUT power_out Regulated output pin with 3.0-5.0V output range, up to 150mA output current.

Key specifications

Parameter Value
Manufacturer HXY MOSFET
Package SOT-23-5L
Category Power Management ICs
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage VOUT 2.94 3 3.06 V VIN=VOUT+2.0V, IOUT=10mA 3
Output Current IOUT 150 mA VIN=VOUT+2.0V 3
Load Regulation ΔVOUT 30 60 mV VIN=VOUT+2.0V, 1mA≤IOUT≤50mA 3
Voltage Drop VDIF 50 100 mV IOUT=1mA, ΔVOUT=2% 3
Quiescent Current ISS 8 11 μA No Load 3
Line Regulation ΔVOUT/VOUT*ΔVIN 0.2 %/V VOUT+1.0V≤VIN≤10V, IOUT=1mA 3
Input Voltage VIN 10 V 3
Temperature Coefficient ΔVOUT/ΔTA*VOUT 100 ppm/℃ VIN=VOUT+2.0V, IOUT=10mA, -40℃≤TA≤85℃ 3
Limit Power Voltage VIN -0.3 12 V 2
Storage Temperature Range TSTG -50 125 ℃ 2
Operating Free-air Temperature Range TA -30 85 ℃ 2
Power dissipation PW 200 mW 2
Thermal resistance θJA 500 ℃/W 2

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: HTPS76330DBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5L, generated on the KiCad land (body 1.625 x 2.935 mm, terminals on the pads, 1.25 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: htps76330dbvr-etched.step / htps76330dbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); htps76330dbvr.step / htps76330dbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HXY MOSFET datasheet (6 pp, sha256 9dcf8dbc68ab21d4, retrieved 2026-11-13, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF