component
HTP4056
Public Made by Adomby adom
HXY MOSFET Battery Management, ESOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+9−6@@ -38,7 +38,7 @@ "number": "2", "name": "PROG", "type": "passive",- "description": "Charge current program pin. An external resistor from PROG to GND sets the constant-current charge level (VPROG \u2248 1.0 V; IBAT = 1000 mA with RPROG = 1.4 k\u03a9). Can also be used to monitor charge current."+ "description": "Charge current program pin. An external resistor from PROG to GND sets the constant-current charge level (VPROG ≈ 1.0 V; IBAT = 1000 mA with RPROG = 1.4 kΩ). Can also be used to monitor charge current." }, { "number": "3",@@ -56,19 +56,19 @@ "number": "5", "name": "BAT", "type": "power_out",- "description": "Battery charge output. Connects to the positive terminal of the single-cell Li-ion battery. Regulated float voltage 4.200 V; delivers up to ~1.0 A (ESOP-8) programmable charge current with \u22642 \u00b5A leakage when VCC is removed."+ "description": "Battery charge output. Connects to the positive terminal of the single-cell Li-ion battery. Regulated float voltage 4.200 V; delivers up to ~1.0 A (ESOP-8) programmable charge current with ≤2 µA leakage when VCC is removed." }, { "number": "6", "name": "STDBY", "type": "output",- "description": "Open-drain charge-complete (standby) status indicator. Pulls low when the charge cycle terminates and the part enters standby; high-impedance otherwise. VOL \u2264 0.3 V at 5 mA sink; typically drives an LED to GND through a pull-up."+ "description": "Open-drain charge-complete (standby) status indicator. Pulls low when the charge cycle terminates and the part enters standby; high-impedance otherwise. VOL ≤ 0.3 V at 5 mA sink; typically drives an LED to GND through a pull-up." }, { "number": "7", "name": "CHRG", "type": "output",- "description": "Open-drain charging status indicator. Pulls low while charging is in progress; high-impedance when charging is complete, in shutdown, or in fault. VOL \u2264 0.3 V at 5 mA sink; typically drives an LED to GND through a pull-up."+ "description": "Open-drain charging status indicator. Pulls low while charging is in progress; high-impedance when charging is complete, in shutdown, or in fault. VOL ≤ 0.3 V at 5 mA sink; typically drives an LED to GND through a pull-up." }, { "number": "8",@@ -80,7 +80,7 @@ "number": "EP", "name": "GND", "type": "power_in",- "description": "Exposed thermal pad on the underside of the ESOP-8 package. Must be soldered to the PCB ground plane for both electrical ground and heat sinking (\u03b8JA = 50 \u00b0C/W)."+ "description": "Exposed thermal pad on the underside of the ESOP-8 package. Must be soldered to the PCB ground plane for both electrical ground and heat sinking (θJA = 50 °C/W)." } ], "provenance": {@@ -144,5 +144,8 @@ "docs/htp4056-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }