main
Ray
Publish 0.1.0
aa7128b
HTD8236ESD
Jiaxing Heroic Elec Tech · Brushed DC Motor Drivers · ESOP-8
HTD8236ESD from Jiaxing Heroic Elec Tech, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Chip ground; the GND pin and the chip's exposed thermal pad must both be connected to power ground. |
| 2 | IN2 | input | Logic input that controls the H-bridge output state together with IN1 (IN1=0/IN2=0 coast/sleep, 1/0 forward, 0/1 reverse, 1/1 brake); VIH is 1.5 V to 5.25 V and VIL is 0.5 V to 0.7 V. |
| 3 | IN1 | input | Logic input that controls the H-bridge output state together with IN2, with an internal 100 kΩ pull-down resistor; VIH is 1.5 V to 5.25 V and VIL is 0.5 V to 0.7 V. |
| 4 | VREF | power_in | Reference voltage input for the HTD8236 that sets the drive peak current; recommended range is 0.5 V to 4 V (the HTD8236N instead fixes VREF internally at 3.3 V). |
| 5 | VM | power_in | Chip and motor supply; recommended 5.5 V to 36 V with an absolute maximum of 40 V, requiring power filtering and at least 47 µF electrolytic capacitance to ground placed close to the device. |
| 6 | OUT1 | output | H-bridge output 1; forward current is defined as flowing from OUT1 to OUT2, with an output peak current rating of ±6 A. |
| 7 | ISEN | input | H-bridge current-sense input: connect the sense resistor from this pin to ground, or tie it directly to ground if current limiting is not needed; the sense voltage absolute range is -0.3 V to 0.5 V. |
| 8 | OUT2 | output | H-bridge output 2; forward current is defined as flowing from OUT1 to OUT2, with an output peak current rating of ±6 A. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Jiaxing Heroic Elec Tech |
| Package | ESOP-8 |
| Category | Motor Driver ICs |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Logic input voltage | VIN | -0.7 | 7 | V | 3 | ||
| Power supply voltage | VM | -0.3 | 40 | V | 3 | ||
| Output peak current | IPEAK | -6 | 6 | A | 3 | ||
| Sense voltage | VSENSE | -0.3 | 0.5 | V | 3 | ||
| Operating temperature | TA | -40 | 85 | °C | HTD8236ESD | 3 | |
| Maximum junction temperature | TJ(max) | 150 | °C | 3 | |||
| Storage temperature | Tstg | -55 | 150 | °C | 3 | ||
| Power supply voltage (recommended) | VM | 5.5 | 36 | V | 3 | ||
| Continuous output current | IOUT | 0 | 3 | A | 3 | ||
| Peak output current (recommended) | IPEAK | 0 | 4.5 | A | 3 | ||
| Logic input voltage (recommended) | VIN | 0 | 5.25 | V | 3 | ||
| Logic input frequency | fPWM | 0 | 100 | kHZ | 3 | ||
| Reference voltage | VREF | 0.5 | 4 | V | 3 | ||
| VM quiescent operating current | IVM | 4.5 | 6 | mA | fPWM < 50 kHz | 4 | |
| VM undervoltage lockout threshold | VUVLO | 4.7 | 5 | V | VM 上升 | 4 | |
| Logic input low voltage | VIL | 0.5 | 0.7 | V | 4 | ||
| Logic input high voltage | VIH | 1.5 | 5.25 | V | 4 | ||
| Logic input current, low level | IIL | -0.2 | 0.2 | uA | VIN = 0 V | 4 | |
| Logic input current, high level | IIH | 33 | 100 | uA | VIN = 3.3 V | 4 | |
| Output off-state leakage current | IOFF | -1 | 1 | uA | 4 | ||
| Delay to enter SLEEP state | tSLEEP | 0.7 | 1 | ms | 4 | ||
| Overcurrent threshold | IOCP | 6 | 7 | 10 | A | 4 | |
| Thermal shutdown threshold (junction temperature) | TSD | 140 | 150 | 160 | °C | 4 | |
| Junction-to-ambient thermal resistance | θJA | 35 | °C/W | ESOP 8PINS | 3 |
CAD (KiCad official)
- Symbol:
HTD8236ESD - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm - 3D model: ESOP-8 (KiCad packages3D, STEP)
- 3D model files:
htd8236esd-etched.step/htd8236esd-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);htd8236esd.step/htd8236esd.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Jiaxing Heroic Elec Tech datasheet (10 pp, sha256
a554d5325ceca3dd, retrieved 2026-11-07, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HTD8236ESD
**Jiaxing Heroic Elec Tech** · Brushed DC Motor Drivers · ESOP-8
HTD8236ESD from Jiaxing Heroic Elec Tech, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Chip ground; the GND pin and the chip's exposed thermal pad must both be connected to power ground. |
| 2 | IN2 | input | Logic input that controls the H-bridge output state together with IN1 (IN1=0/IN2=0 coast/sleep, 1/0 forward, 0/1 reverse, 1/1 brake); VIH is 1.5 V to 5.25 V and VIL is 0.5 V to 0.7 V. |
| 3 | IN1 | input | Logic input that controls the H-bridge output state together with IN2, with an internal 100 kΩ pull-down resistor; VIH is 1.5 V to 5.25 V and VIL is 0.5 V to 0.7 V. |
| 4 | VREF | power_in | Reference voltage input for the HTD8236 that sets the drive peak current; recommended range is 0.5 V to 4 V (the HTD8236N instead fixes VREF internally at 3.3 V). |
| 5 | VM | power_in | Chip and motor supply; recommended 5.5 V to 36 V with an absolute maximum of 40 V, requiring power filtering and at least 47 µF electrolytic capacitance to ground placed close to the device. |
| 6 | OUT1 | output | H-bridge output 1; forward current is defined as flowing from OUT1 to OUT2, with an output peak current rating of ±6 A. |
| 7 | ISEN | input | H-bridge current-sense input: connect the sense resistor from this pin to ground, or tie it directly to ground if current limiting is not needed; the sense voltage absolute range is -0.3 V to 0.5 V. |
| 8 | OUT2 | output | H-bridge output 2; forward current is defined as flowing from OUT1 to OUT2, with an output peak current rating of ±6 A. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Jiaxing Heroic Elec Tech |
| Package | ESOP-8 |
| Category | Motor Driver ICs |
| Pins | 9 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Logic input voltage | VIN | -0.7 | | 7 | V | | 3 |
| Power supply voltage | VM | -0.3 | | 40 | V | | 3 |
| Output peak current | IPEAK | -6 | | 6 | A | | 3 |
| Sense voltage | VSENSE | -0.3 | | 0.5 | V | | 3 |
| Operating temperature | TA | -40 | | 85 | °C | HTD8236ESD | 3 |
| Maximum junction temperature | TJ(max) | | | 150 | °C | | 3 |
| Storage temperature | Tstg | -55 | | 150 | °C | | 3 |
| Power supply voltage (recommended) | VM | 5.5 | | 36 | V | | 3 |
| Continuous output current | IOUT | 0 | | 3 | A | | 3 |
| Peak output current (recommended) | IPEAK | 0 | | 4.5 | A | | 3 |
| Logic input voltage (recommended) | VIN | 0 | | 5.25 | V | | 3 |
| Logic input frequency | fPWM | 0 | | 100 | kHZ | | 3 |
| Reference voltage | VREF | 0.5 | | 4 | V | | 3 |
| VM quiescent operating current | IVM | | 4.5 | 6 | mA | fPWM < 50 kHz | 4 |
| VM undervoltage lockout threshold | VUVLO | | 4.7 | 5 | V | VM 上升 | 4 |
| Logic input low voltage | VIL | | 0.5 | 0.7 | V | | 4 |
| Logic input high voltage | VIH | 1.5 | | 5.25 | V | | 4 |
| Logic input current, low level | IIL | -0.2 | | 0.2 | uA | VIN = 0 V | 4 |
| Logic input current, high level | IIH | | 33 | 100 | uA | VIN = 3.3 V | 4 |
| Output off-state leakage current | IOFF | -1 | | 1 | uA | | 4 |
| Delay to enter SLEEP state | tSLEEP | | 0.7 | 1 | ms | | 4 |
| Overcurrent threshold | IOCP | 6 | 7 | 10 | A | | 4 |
| Thermal shutdown threshold (junction temperature) | TSD | 140 | 150 | 160 | °C | | 4 |
| Junction-to-ambient thermal resistance | θJA | | 35 | | °C/W | ESOP 8PINS | 3 |
## CAD (KiCad official)
- Symbol: `HTD8236ESD`
- Footprint: `Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm`
- 3D model: ESOP-8 (KiCad packages3D, STEP)
- 3D model files: `htd8236esd-etched.step` / `htd8236esd-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `htd8236esd.step` / `htd8236esd.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Jiaxing Heroic Elec Tech datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8602845992420974592) (10 pp, sha256 `a554d5325ceca3dd`, retrieved 2026-11-07, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/htd8236esd-datasheet.pdf)