Generated by kicad-footprint-generator · KiCad file format 20260206
HT9280ARSZ
HTCSEMI · Analog To Digital Converters (ADCs) · SSOP-28
HT9280ARSZ from HTCSEMI, in a SSOP-28. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AVSS | power_in | Analog ground for the converter; all analog circuitry returns to this pin. |
| 2 | DRVDD | power_in | Digital driver supply, specified at 2.7 V to 3.6 V (3.3 V typical). |
| 3 | NC | unconnected | No-connect pin, listed as NC in the pin function table. |
| 4 | NC | unconnected | No-connect pin, listed as NC in the pin function table. |
| 5 | D0 | output | Output data bit 0, the least significant bit of the straight-binary output word. |
| 6 | D1 | output | Output data bit 1 (B1) of the straight-binary output word. |
| 7 | D2 | output | Output data bit 2 (B2) of the straight-binary output word. |
| 8 | D3 | output | Output data bit 3 (B3) of the straight-binary output word. |
| 9 | D4 | output | Output data bit 4 (B4) of the straight-binary output word. |
| 10 | D5 | output | Output data bit 5 (B5) of the straight-binary output word. |
| 11 | D6 | output | Output data bit 6 (B6) of the straight-binary output word. |
| 12 | D7 | output | Output data bit 7, the most significant bit of the straight-binary output word. |
| 13 | OTR | output | Out-of-range indicator, set high when the input overflows the converter span. |
| 14 | DRVSS | power_in | Digital ground for the output drivers; digital signals are referenced to analog ground. |
| 15 | CLK | input | Sampling clock input; the converter samples on both rising and falling edges and supports up to 50 MSPS. |
| 16 | THREE-STATE | input | HI places the digital outputs in high-impedance state; LO for normal operation. |
| 17 | STBY | input | HI selects power-down mode (with clock held low); LO for normal operation. |
| 18 | REFSENSE | input | Reference select; connecting this pin to VDD disables the internal reference for external reference operation. |
| 19 | CLAMP | input | HI enables clamp mode (pulse applied to clamp the input to CLAMPIN level); LO for no clamp. |
| 20 | CLAMPIN | input | Clamp reference input; the allowable clamp voltage range is 0.5 V to 2.0 V. |
| 21 | REFTS | passive | Top reference; defines the maximum input voltage in single-ended operation (REFBS ≤ AIN ≤ REFTS). |
| 22 | REFTF | passive | Top reference decoupling pin; requires the decoupling network described in the datasheet. |
| 23 | MODE | input | Mode select strapped to AVDD, AVDD/2 or AVSS to choose the input span and reference configuration. |
| 24 | REFBF | passive | Bottom reference decoupling pin; requires the decoupling network described in the datasheet. |
| 25 | REFBS | passive | Bottom reference; defines the minimum input voltage in single-ended operation and is tied to ground in 1 V top/bottom mode. |
| 26 | VREF | power_in | Internal reference output (1 V or 2 V by strapping); an external reference may also be tied here. |
| 27 | AIN | input | Analog input; in single-ended operation the signal must lie between REFBS and REFTS. |
| 28 | AVDD | power_in | Analog supply, specified at 2.7 V to 3.6 V (3.3 V typical). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTCSEMI |
| Package | SSOP-28 |
| Category | ADC/DAC/Data Conversion |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Differential Nonlinearity (DNL) | DNL | -0.5 | 0.2 | 0.5 | LSB | AVDD=DVDD=3.3 V, FS=50 MHz, MODE=AVDD, 2 V span 0.5-2.5 V, external ref; REFTS=2.5 V, REFBS=0.5 V | 2 |
| Integral Nonlinearity (INL) | INL | -0.5 | 0.3 | 0.5 | LSB | AVDD=DVDD=3.3 V, FS=50 MHz, MODE=AVDD, 2 V span 0.5-2.5 V, external ref | 2 |
| Offset Error | -1.5 | 0.2 | 1.5 | % of FSR | AVDD=DVDD=3.3 V, FS=50 MHz, MODE=AVDD, 2 V span 0.5-2.5 V, external ref | 2 | |
| Gain Error (Without Internal Reference) | -4 | 1.2 | 4 | % of FSR | AVDD=DVDD=3.3 V, FS=50 MHz, MODE=AVDD, 2 V span 0.5-2.5 V, external ref | 2 | |
| Gain Error (With Internal Reference) | -5 | 1.2 | 5 | % of FSR | AVDD=DVDD=3.3 V, FS=50 MHz, MODE=AVDD, 2 V span 0.5-2.5 V, internal ref | 2 | |
| Operating Voltage, AVDD | AVDD | 2.7 | 3.3 | 3.6 | V | 2 | |
| Operating Voltage, DRVDD | DRVDD | 2.7 | 3.3 | 3.6 | V | 2 | |
| Analog Supply Current | IAVDD | 27.5 | 32 | mA | AVDD=DVDD=3.3 V, FS=50 MHz, 2 V span, external ref | 2 | |
| Power Consumption | PD | 82.7 | 96.5 | mW | AVDD=DVDD=3.3 V, FS=50 MHz, 2 V span, external ref | 2 | |
| Operating Range | -40 | 85 | ℃ | 2 | |||
| High-Z Leakage | -12 | 12 | uA | AVDD=DRVDD=3.3 V, AIN=0.5 dBFS | 3 | ||
| Maximum Output Update Rate | fCLOCK | 50 | MSPS | 3 | |||
| Allowable clamp voltage range | 0.5 | 2 | V | Clamp mode: CLAMPIN dc level, CLAMP pin pulsed | 12 | ||
| Series resistance at AIN | 20 | Ω | Series resistor between source and AIN to keep datasheet performance | 13 | |||
| Maximum reference drive current | 0.5 | mA | Internal reference, stated as about 0.5 mA | 11 |
CAD (KiCad official)
- Symbol:
HT9280ARSZ - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28 (KiCad packages3D, STEP)
- 3D model files:
ht9280arsz-etched.step/ht9280arsz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ht9280arsz.step/ht9280arsz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HTCSEMI datasheet (15 pp, sha256
2c842fc0c1cff8da, retrieved 2026-11-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).