← Commit history

Publish 0.1.2

Ray ·3ad028cdd2 · ·parent bf4366e
3 files changed +111−110
README.md+40−39
@@ -2,39 +2,39 @@  **HTCSEMI** · Analog To Digital Converters (ADCs) · SSOP-28 -HT9280ARSZ from HTCSEMI, in a SSOP-28. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.+HT9280ARSZ from HTCSEMI, in a SSOP-28. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.  ## Pinout  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | AVSS | power_in | Analog ground for the ADC; all digital signals are referenced to analog ground. |+| 1 | AVSS | power_in | Analog ground for the converter; all analog circuitry returns to this pin. | | 2 | DRVDD | power_in | Digital driver supply, specified at 2.7 V to 3.6 V (3.3 V typical). |-| 3 | NC | unconnected | No connect pin. |-| 4 | NC | unconnected | No connect pin. |-| 5 | D0 | output | Output data bit 0 (LSB) of the straight-binary 8-bit output word. |-| 6 | D1 | output | Output data bit 1 of the straight-binary 8-bit output word. |-| 7 | D2 | output | Output data bit 2 of the straight-binary 8-bit output word. |-| 8 | D3 | output | Output data bit 3 of the straight-binary 8-bit output word. |-| 9 | D4 | output | Output data bit 4 of the straight-binary 8-bit output word. |-| 10 | D5 | output | Output data bit 5 of the straight-binary 8-bit output word. |-| 11 | D6 | output | Output data bit 6 of the straight-binary 8-bit output word. |-| 12 | D7 | output | Output data bit 7 (MSB) of the straight-binary 8-bit output word. |-| 13 | OTR | output | Out-of-range indicator, set high when the analog input overflows the input span. |-| 14 | DRVSS | power_in | Digital ground for the output drivers. |-| 15 | CLK | input | Sampling clock input, up to 50 MSPS; the ADC operates on both rising and falling edges of this clock. |-| 16 | THREE-STATE | input | Output three-state control: HI puts the data outputs in high-impedance state, LO selects normal operation. |-| 17 | STBY | input | Power-down control: HI enables power-down mode (tie to AVDD with clock held low), LO selects normal operation. |-| 18 | REFSENSE | input | Reference select: connecting this pin to VDD disables the internal reference so an external reference can be used. |-| 19 | CLAMP | input | Clamp mode enable: HI enables clamp mode (pulse applied for AC-coupled clamping), LO selects no clamp. |+| 3 | NC | unconnected | No-connect pin, listed as NC in the pin function table. |+| 4 | NC | unconnected | No-connect pin, listed as NC in the pin function table. |+| 5 | D0 | output | Output data bit 0, the least significant bit of the straight-binary output word. |+| 6 | D1 | output | Output data bit 1 (B1) of the straight-binary output word. |+| 7 | D2 | output | Output data bit 2 (B2) of the straight-binary output word. |+| 8 | D3 | output | Output data bit 3 (B3) of the straight-binary output word. |+| 9 | D4 | output | Output data bit 4 (B4) of the straight-binary output word. |+| 10 | D5 | output | Output data bit 5 (B5) of the straight-binary output word. |+| 11 | D6 | output | Output data bit 6 (B6) of the straight-binary output word. |+| 12 | D7 | output | Output data bit 7, the most significant bit of the straight-binary output word. |+| 13 | OTR | output | Out-of-range indicator, set high when the input overflows the converter span. |+| 14 | DRVSS | power_in | Digital ground for the output drivers; digital signals are referenced to analog ground. |+| 15 | CLK | input | Sampling clock input; the converter samples on both rising and falling edges and supports up to 50 MSPS. |+| 16 | THREE-STATE | input | HI places the digital outputs in high-impedance state; LO for normal operation. |+| 17 | STBY | input | HI selects power-down mode (with clock held low); LO for normal operation. |+| 18 | REFSENSE | input | Reference select; connecting this pin to VDD disables the internal reference for external reference operation. |+| 19 | CLAMP | input | HI enables clamp mode (pulse applied to clamp the input to CLAMPIN level); LO for no clamp. | | 20 | CLAMPIN | input | Clamp reference input; the allowable clamp voltage range is 0.5 V to 2.0 V. |-| 21 | REFTS | passive | Top reference input; sets the upper end of the input range, with the input span limited to 1 V to 2 V in top/bottom modes. |-| 22 | REFTF | passive | Top reference decoupling node, requiring the decoupling capacitor network shown in the datasheet. |-| 23 | MODE | input | Mode select pin, strapped to AVDD, AVSS or AVDD/2 to configure the input span and reference mode. |-| 24 | REFBF | passive | Bottom reference decoupling node, requiring the decoupling capacitor network shown in the datasheet. |-| 25 | REFBS | passive | Bottom reference; sets the lower end of the input range and must be grounded for single-ended 1 V p-p top/bottom operation. |-| 26 | VREF | power_in | Internal reference output, 1 V or 2 V selectable by strapping, also usable as the reference node for an external divider. |-| 27 | AIN | input | Analog signal input; with REFTS and REFBS it defines the input span, with a series resistor of 20 Ω or less recommended. |+| 21 | REFTS | passive | Top reference; defines the maximum input voltage in single-ended operation (REFBS ≤ AIN ≤ REFTS). |+| 22 | REFTF | passive | Top reference decoupling pin; requires the decoupling network described in the datasheet. |+| 23 | MODE | input | Mode select strapped to AVDD, AVDD/2 or AVSS to choose the input span and reference configuration. |+| 24 | REFBF | passive | Bottom reference decoupling pin; requires the decoupling network described in the datasheet. |+| 25 | REFBS | passive | Bottom reference; defines the minimum input voltage in single-ended operation and is tied to ground in 1 V top/bottom mode. |+| 26 | VREF | power_in | Internal reference output (1 V or 2 V by strapping); an external reference may also be tied here. |+| 27 | AIN | input | Analog input; in single-ended operation the signal must lie between REFBS and REFTS. | | 28 | AVDD | power_in | Analog supply, specified at 2.7 V to 3.6 V (3.3 V typical). |  ## Key specifications@@ -52,20 +52,21 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Differential Nonlinearity (DNL) | DNL | -0.5 | 0.2 | 0.5 | LSB | REFTS = 2.5V, REFBS = 0.5V (note *) | 2 |-| Integral Nonlinearity (INL) | INL | -0.5 | 0.3 | 0.5 | LSB |  | 2 |-| Offset Error |  | -1.5 | 0.2 | 1.5 | % of FSR |  | 2 |-| Gain Error (Without Internal Reference) |  | -4 | 1.2 | 4 | % of FSR | Without internal reference | 2 |-| Gain Error (With Internal Reference) |  | -5 | 1.2 | 5 | % of FSR | With internal reference | 2 |+| Differential Nonlinearity (DNL) | DNL | -0.5 | 0.2 | 0.5 | LSB | AVDD=DVDD=3.3 V, FS=50 MHz, MODE=AVDD, 2 V span 0.5-2.5 V, external ref; REFTS=2.5 V, REFBS=0.5 V | 2 |+| Integral Nonlinearity (INL) | INL | -0.5 | 0.3 | 0.5 | LSB | AVDD=DVDD=3.3 V, FS=50 MHz, MODE=AVDD, 2 V span 0.5-2.5 V, external ref | 2 |+| Offset Error |  | -1.5 | 0.2 | 1.5 | % of FSR | AVDD=DVDD=3.3 V, FS=50 MHz, MODE=AVDD, 2 V span 0.5-2.5 V, external ref | 2 |+| Gain Error (Without Internal Reference) |  | -4 | 1.2 | 4 | % of FSR | AVDD=DVDD=3.3 V, FS=50 MHz, MODE=AVDD, 2 V span 0.5-2.5 V, external ref | 2 |+| Gain Error (With Internal Reference) |  | -5 | 1.2 | 5 | % of FSR | AVDD=DVDD=3.3 V, FS=50 MHz, MODE=AVDD, 2 V span 0.5-2.5 V, internal ref | 2 | | Operating Voltage, AVDD | AVDD | 2.7 | 3.3 | 3.6 | V |  | 2 | | Operating Voltage, DRVDD | DRVDD | 2.7 | 3.3 | 3.6 | V |  | 2 |-| Operating Range (temperature) |  | -40 |  | 85 | ℃ |  | 2 |-| High-Z Leakage |  | -12 |  | 12 | uA | Digital output, high-impedance | 3 |-| High Input Voltage |  | 2.4 |  |  | V |  | 3 |-| Low Input Voltage |  |  |  | 0.3 | V |  | 3 |-| Allowable clamp voltage range (CLAMPIN) |  | 0.5 |  | 2 | V | Clamp mode, CLAMPIN dc level | 12 |-| Series resistance at AIN |  |  |  | 20 | Ω | To maintain datasheet performance | 13 |-| Top/bottom reference points range |  | 1 |  | 2 | V | Top/bottom mode, REFTS and REFBS points; external divider voltage also 1 V to 2 V | 9 |+| Analog Supply Current | IAVDD |  | 27.5 | 32 | mA | AVDD=DVDD=3.3 V, FS=50 MHz, 2 V span, external ref | 2 |+| Power Consumption | PD |  | 82.7 | 96.5 | mW | AVDD=DVDD=3.3 V, FS=50 MHz, 2 V span, external ref | 2 |+| Operating Range |  | -40 |  | 85 | ℃ |  | 2 |+| High-Z Leakage |  | -12 |  | 12 | uA | AVDD=DRVDD=3.3 V, AIN=0.5 dBFS | 3 |+| Maximum Output Update Rate | fCLOCK |  |  | 50 | MSPS |  | 3 |+| Allowable clamp voltage range |  | 0.5 |  | 2 | V | Clamp mode: CLAMPIN dc level, CLAMP pin pulsed | 12 |+| Series resistance at AIN |  |  |  | 20 | Ω | Series resistor between source and AIN to keep datasheet performance | 13 |+| Maximum reference drive current |  |  |  | 0.5 | mA | Internal reference, stated as about 0.5 mA | 11 |  ## CAD (KiCad official) @@ -78,7 +79,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [HTCSEMI datasheet](docs/ht9280arsz-datasheet.pdf) (15 pp, sha256 `2c842fc0c1cff8da`, retrieved 2026-11-12, tier: lcsc)+- **Datasheet:** [HTCSEMI datasheet](docs/ht9280arsz-datasheet.pdf) (15 pp, sha256 `2c842fc0c1cff8da`, retrieved 2026-11-13, tier: lcsc) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0). 
package.json+34−35
@@ -1,6 +1,6 @@ {   "slug": "ht9280arsz",-  "version": "0.1.1",+  "version": "0.1.2",   "type": "component",   "description": "HTCSEMI Analog To Digital Converters (ADCs), SSOP-28. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -28,8 +28,7 @@     "viewers/symbol.html",     "viewers/footprint.html",     "ht9280arsz-hero.glb",-    "ht9280arsz-hero.overlay.json",-    "ht9280arsz-etched.glb"+    "ht9280arsz-hero.overlay.json"   ],   "component": {     "mpn": "HT9280ARSZ",@@ -43,7 +42,7 @@       "symbol": "ht9280arsz.kicad_sym",       "footprint": "ht9280arsz.kicad_mod",       "model_3d": "ht9280arsz-hero.glb",-      "model_3d_plain": "ht9280arsz-etched.glb",+      "model_3d_plain": "ht9280arsz.glb",       "model_3d_step": "ht9280arsz-etched.step",       "model_3d_step_plain": "ht9280arsz.step",       "lbr": "ht9280arsz.lbr"@@ -52,7 +51,7 @@       "lcsc": "C5336214"     },     "distributor_check": {-      "checked_at": "2026-11-12T07:57:05Z",+      "checked_at": "2026-11-13T00:03:42Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": null,@@ -68,7 +67,7 @@         "number": "1",         "name": "AVSS",         "type": "power_in",-        "description": "Analog ground for the ADC; all digital signals are referenced to analog ground."+        "description": "Analog ground for the converter; all analog circuitry returns to this pin."       },       {         "number": "2",@@ -80,103 +79,103 @@         "number": "3",         "name": "NC",         "type": "unconnected",-        "description": "No connect pin."+        "description": "No-connect pin, listed as NC in the pin function table."       },       {         "number": "4",         "name": "NC",         "type": "unconnected",-        "description": "No connect pin."+        "description": "No-connect pin, listed as NC in the pin function table."       },       {         "number": "5",         "name": "D0",         "type": "output",-        "description": "Output data bit 0 (LSB) of the straight-binary 8-bit output word."+        "description": "Output data bit 0, the least significant bit of the straight-binary output word."       },       {         "number": "6",         "name": "D1",         "type": "output",-        "description": "Output data bit 1 of the straight-binary 8-bit output word."+        "description": "Output data bit 1 (B1) of the straight-binary output word."       },       {         "number": "7",         "name": "D2",         "type": "output",-        "description": "Output data bit 2 of the straight-binary 8-bit output word."+        "description": "Output data bit 2 (B2) of the straight-binary output word."       },       {         "number": "8",         "name": "D3",         "type": "output",-        "description": "Output data bit 3 of the straight-binary 8-bit output word."+        "description": "Output data bit 3 (B3) of the straight-binary output word."       },       {         "number": "9",         "name": "D4",         "type": "output",-        "description": "Output data bit 4 of the straight-binary 8-bit output word."+        "description": "Output data bit 4 (B4) of the straight-binary output word."       },       {         "number": "10",         "name": "D5",         "type": "output",-        "description": "Output data bit 5 of the straight-binary 8-bit output word."+        "description": "Output data bit 5 (B5) of the straight-binary output word."       },       {         "number": "11",         "name": "D6",         "type": "output",-        "description": "Output data bit 6 of the straight-binary 8-bit output word."+        "description": "Output data bit 6 (B6) of the straight-binary output word."       },       {         "number": "12",         "name": "D7",         "type": "output",-        "description": "Output data bit 7 (MSB) of the straight-binary 8-bit output word."+        "description": "Output data bit 7, the most significant bit of the straight-binary output word."       },       {         "number": "13",         "name": "OTR",         "type": "output",-        "description": "Out-of-range indicator, set high when the analog input overflows the input span."+        "description": "Out-of-range indicator, set high when the input overflows the converter span."       },       {         "number": "14",         "name": "DRVSS",         "type": "power_in",-        "description": "Digital ground for the output drivers."+        "description": "Digital ground for the output drivers; digital signals are referenced to analog ground."       },       {         "number": "15",         "name": "CLK",         "type": "input",-        "description": "Sampling clock input, up to 50 MSPS; the ADC operates on both rising and falling edges of this clock."+        "description": "Sampling clock input; the converter samples on both rising and falling edges and supports up to 50 MSPS."       },       {         "number": "16",         "name": "THREE-STATE",         "type": "input",-        "description": "Output three-state control: HI puts the data outputs in high-impedance state, LO selects normal operation."+        "description": "HI places the digital outputs in high-impedance state; LO for normal operation."       },       {         "number": "17",         "name": "STBY",         "type": "input",-        "description": "Power-down control: HI enables power-down mode (tie to AVDD with clock held low), LO selects normal operation."+        "description": "HI selects power-down mode (with clock held low); LO for normal operation."       },       {         "number": "18",         "name": "REFSENSE",         "type": "input",-        "description": "Reference select: connecting this pin to VDD disables the internal reference so an external reference can be used."+        "description": "Reference select; connecting this pin to VDD disables the internal reference for external reference operation."       },       {         "number": "19",         "name": "CLAMP",         "type": "input",-        "description": "Clamp mode enable: HI enables clamp mode (pulse applied for AC-coupled clamping), LO selects no clamp."+        "description": "HI enables clamp mode (pulse applied to clamp the input to CLAMPIN level); LO for no clamp."       },       {         "number": "20",@@ -188,43 +187,43 @@         "number": "21",         "name": "REFTS",         "type": "passive",-        "description": "Top reference input; sets the upper end of the input range, with the input span limited to 1 V to 2 V in top/bottom modes."+        "description": "Top reference; defines the maximum input voltage in single-ended operation (REFBS ≤ AIN ≤ REFTS)."       },       {         "number": "22",         "name": "REFTF",         "type": "passive",-        "description": "Top reference decoupling node, requiring the decoupling capacitor network shown in the datasheet."+        "description": "Top reference decoupling pin; requires the decoupling network described in the datasheet."       },       {         "number": "23",         "name": "MODE",         "type": "input",-        "description": "Mode select pin, strapped to AVDD, AVSS or AVDD/2 to configure the input span and reference mode."+        "description": "Mode select strapped to AVDD, AVDD/2 or AVSS to choose the input span and reference configuration."       },       {         "number": "24",         "name": "REFBF",         "type": "passive",-        "description": "Bottom reference decoupling node, requiring the decoupling capacitor network shown in the datasheet."+        "description": "Bottom reference decoupling pin; requires the decoupling network described in the datasheet."       },       {         "number": "25",         "name": "REFBS",         "type": "passive",-        "description": "Bottom reference; sets the lower end of the input range and must be grounded for single-ended 1 V p-p top/bottom operation."+        "description": "Bottom reference; defines the minimum input voltage in single-ended operation and is tied to ground in 1 V top/bottom mode."       },       {         "number": "26",         "name": "VREF",         "type": "power_in",-        "description": "Internal reference output, 1 V or 2 V selectable by strapping, also usable as the reference node for an external divider."+        "description": "Internal reference output (1 V or 2 V by strapping); an external reference may also be tied here."       },       {         "number": "27",         "name": "AIN",         "type": "input",-        "description": "Analog signal input; with REFTS and REFBS it defines the input span, with a series resistor of 20 Ω or less recommended."+        "description": "Analog input; in single-ended operation the signal must lie between REFBS and REFTS."       },       {         "number": "28",@@ -244,12 +243,12 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The datasheet's ordering guide lists only 'HT9280A' (28-Lead SSOP, -40°C to +85°C). The 'RS' / 'Z' s; AVSS and DRVSS are described as analog and digital ground, typed as power_in per the GND convention;; Control pins are typed as input from their HI/LO function text; the datasheet does not give electric",+          "extractor flagged: The datasheet covers only the 28-lead SSOP (SSOP28) package; it is the only package in the ordering ; The datasheet gives the pin function table but not explicit ERC electrical types. Types were assigne; The pin table groups pins 6-11 as D1-D6 (B1-B6) with no per-pin entry, so each pin number was expand",           "1/28 pins cited to the wrong page (name found elsewhere): ['9:D4@p4']"         ],         "pages_sent": 15,         "cost_usd": 0.0675,-        "at": "2026-11-12T07:56:30"+        "at": "2026-11-13T00:03:27"       },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/b2bf38f3d86f48d8864287719e1d52ba.pdf",@@ -286,7 +285,7 @@         "centre_offset_mm": 0.0,         "footprint_binding": "identity",         "sha256": "7aa76979ae41da44bded1ed74115012868f2f3f5a757faf32bb9df4f92c1e313",-        "checked": "2026-11-12",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -304,8 +303,8 @@         "zmin_mm": 0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "9d4ae692cfa85bcc145593a58b22fda80d120f203a6fb4b71a3b7504287b4b81",-        "checked": "2026-11-12",+        "sha256": "eb94755f9abcc2942686ed1d502d72c11afde1b7afd4ba7cadebfe020a994441",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],
page.json+37−36
@@ -4,7 +4,7 @@   "slug": "ht9280arsz",   "title": "HT9280ARSZ",   "brief": "HTCSEMI Analog To Digital Converters (ADCs), SSOP-28. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.1",+  "version": "0.1.2",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -25,7 +25,7 @@       "symbol": "ht9280arsz.kicad_sym",       "footprint": "ht9280arsz.kicad_mod",       "model_3d": "ht9280arsz-hero.glb",-      "model_3d_plain": "ht9280arsz-etched.glb",+      "model_3d_plain": "ht9280arsz.glb",       "model_3d_step": "ht9280arsz-etched.step",       "model_3d_step_plain": "ht9280arsz.step",       "lbr": "ht9280arsz.lbr"@@ -34,7 +34,7 @@       "lcsc": "C5336214"     },     "distributor_check": {-      "checked_at": "2026-11-12T07:57:05Z",+      "checked_at": "2026-11-13T00:03:42Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": null,@@ -50,7 +50,7 @@         "number": "1",         "name": "AVSS",         "type": "power_in",-        "description": "Analog ground for the ADC; all digital signals are referenced to analog ground."+        "description": "Analog ground for the converter; all analog circuitry returns to this pin."       },       {         "number": "2",@@ -62,103 +62,103 @@         "number": "3",         "name": "NC",         "type": "unconnected",-        "description": "No connect pin."+        "description": "No-connect pin, listed as NC in the pin function table."       },       {         "number": "4",         "name": "NC",         "type": "unconnected",-        "description": "No connect pin."+        "description": "No-connect pin, listed as NC in the pin function table."       },       {         "number": "5",         "name": "D0",         "type": "output",-        "description": "Output data bit 0 (LSB) of the straight-binary 8-bit output word."+        "description": "Output data bit 0, the least significant bit of the straight-binary output word."       },       {         "number": "6",         "name": "D1",         "type": "output",-        "description": "Output data bit 1 of the straight-binary 8-bit output word."+        "description": "Output data bit 1 (B1) of the straight-binary output word."       },       {         "number": "7",         "name": "D2",         "type": "output",-        "description": "Output data bit 2 of the straight-binary 8-bit output word."+        "description": "Output data bit 2 (B2) of the straight-binary output word."       },       {         "number": "8",         "name": "D3",         "type": "output",-        "description": "Output data bit 3 of the straight-binary 8-bit output word."+        "description": "Output data bit 3 (B3) of the straight-binary output word."       },       {         "number": "9",         "name": "D4",         "type": "output",-        "description": "Output data bit 4 of the straight-binary 8-bit output word."+        "description": "Output data bit 4 (B4) of the straight-binary output word."       },       {         "number": "10",         "name": "D5",         "type": "output",-        "description": "Output data bit 5 of the straight-binary 8-bit output word."+        "description": "Output data bit 5 (B5) of the straight-binary output word."       },       {         "number": "11",         "name": "D6",         "type": "output",-        "description": "Output data bit 6 of the straight-binary 8-bit output word."+        "description": "Output data bit 6 (B6) of the straight-binary output word."       },       {         "number": "12",         "name": "D7",         "type": "output",-        "description": "Output data bit 7 (MSB) of the straight-binary 8-bit output word."+        "description": "Output data bit 7, the most significant bit of the straight-binary output word."       },       {         "number": "13",         "name": "OTR",         "type": "output",-        "description": "Out-of-range indicator, set high when the analog input overflows the input span."+        "description": "Out-of-range indicator, set high when the input overflows the converter span."       },       {         "number": "14",         "name": "DRVSS",         "type": "power_in",-        "description": "Digital ground for the output drivers."+        "description": "Digital ground for the output drivers; digital signals are referenced to analog ground."       },       {         "number": "15",         "name": "CLK",         "type": "input",-        "description": "Sampling clock input, up to 50 MSPS; the ADC operates on both rising and falling edges of this clock."+        "description": "Sampling clock input; the converter samples on both rising and falling edges and supports up to 50 MSPS."       },       {         "number": "16",         "name": "THREE-STATE",         "type": "input",-        "description": "Output three-state control: HI puts the data outputs in high-impedance state, LO selects normal operation."+        "description": "HI places the digital outputs in high-impedance state; LO for normal operation."       },       {         "number": "17",         "name": "STBY",         "type": "input",-        "description": "Power-down control: HI enables power-down mode (tie to AVDD with clock held low), LO selects normal operation."+        "description": "HI selects power-down mode (with clock held low); LO for normal operation."       },       {         "number": "18",         "name": "REFSENSE",         "type": "input",-        "description": "Reference select: connecting this pin to VDD disables the internal reference so an external reference can be used."+        "description": "Reference select; connecting this pin to VDD disables the internal reference for external reference operation."       },       {         "number": "19",         "name": "CLAMP",         "type": "input",-        "description": "Clamp mode enable: HI enables clamp mode (pulse applied for AC-coupled clamping), LO selects no clamp."+        "description": "HI enables clamp mode (pulse applied to clamp the input to CLAMPIN level); LO for no clamp."       },       {         "number": "20",@@ -170,43 +170,43 @@         "number": "21",         "name": "REFTS",         "type": "passive",-        "description": "Top reference input; sets the upper end of the input range, with the input span limited to 1 V to 2 V in top/bottom modes."+        "description": "Top reference; defines the maximum input voltage in single-ended operation (REFBS ≤ AIN ≤ REFTS)."       },       {         "number": "22",         "name": "REFTF",         "type": "passive",-        "description": "Top reference decoupling node, requiring the decoupling capacitor network shown in the datasheet."+        "description": "Top reference decoupling pin; requires the decoupling network described in the datasheet."       },       {         "number": "23",         "name": "MODE",         "type": "input",-        "description": "Mode select pin, strapped to AVDD, AVSS or AVDD/2 to configure the input span and reference mode."+        "description": "Mode select strapped to AVDD, AVDD/2 or AVSS to choose the input span and reference configuration."       },       {         "number": "24",         "name": "REFBF",         "type": "passive",-        "description": "Bottom reference decoupling node, requiring the decoupling capacitor network shown in the datasheet."+        "description": "Bottom reference decoupling pin; requires the decoupling network described in the datasheet."       },       {         "number": "25",         "name": "REFBS",         "type": "passive",-        "description": "Bottom reference; sets the lower end of the input range and must be grounded for single-ended 1 V p-p top/bottom operation."+        "description": "Bottom reference; defines the minimum input voltage in single-ended operation and is tied to ground in 1 V top/bottom mode."       },       {         "number": "26",         "name": "VREF",         "type": "power_in",-        "description": "Internal reference output, 1 V or 2 V selectable by strapping, also usable as the reference node for an external divider."+        "description": "Internal reference output (1 V or 2 V by strapping); an external reference may also be tied here."       },       {         "number": "27",         "name": "AIN",         "type": "input",-        "description": "Analog signal input; with REFTS and REFBS it defines the input span, with a series resistor of 20 Ω or less recommended."+        "description": "Analog input; in single-ended operation the signal must lie between REFBS and REFTS."       },       {         "number": "28",@@ -226,12 +226,12 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The datasheet's ordering guide lists only 'HT9280A' (28-Lead SSOP, -40°C to +85°C). The 'RS' / 'Z' s; AVSS and DRVSS are described as analog and digital ground, typed as power_in per the GND convention;; Control pins are typed as input from their HI/LO function text; the datasheet does not give electric",+          "extractor flagged: The datasheet covers only the 28-lead SSOP (SSOP28) package; it is the only package in the ordering ; The datasheet gives the pin function table but not explicit ERC electrical types. Types were assigne; The pin table groups pins 6-11 as D1-D6 (B1-B6) with no per-pin entry, so each pin number was expand",           "1/28 pins cited to the wrong page (name found elsewhere): ['9:D4@p4']"         ],         "pages_sent": 15,         "cost_usd": 0.0675,-        "at": "2026-11-12T07:56:30"+        "at": "2026-11-13T00:03:27"       },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/b2bf38f3d86f48d8864287719e1d52ba.pdf",@@ -268,7 +268,7 @@         "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "7aa76979ae41da44bded1ed74115012868f2f3f5a757faf32bb9df4f92c1e313",-        "checked": "2026-11-12",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -286,8 +286,8 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "9d4ae692cfa85bcc145593a58b22fda80d120f203a6fb4b71a3b7504287b4b81",-        "checked": "2026-11-12",+        "sha256": "eb94755f9abcc2942686ed1d502d72c11afde1b7afd4ba7cadebfe020a994441",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],@@ -557,10 +557,11 @@     "viewers/symbol.html",     "viewers/footprint.html",     "ht9280arsz-hero.glb",-    "ht9280arsz-hero.overlay.json",-    "ht9280arsz-etched.glb"+    "ht9280arsz-hero.overlay.json"   ],   "visibility": {     "public": true-  }+  },+  "description": "HTCSEMI Analog To Digital Converters (ADCs), SSOP-28. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file