← Commit history

Publish 0.1.1

Ray ·1e2118acf6 · ·parent 1e42ef8
4 files changed +816−814
README.md+40−45
@@ -8,34 +8,34 @@ HT9280ARSZ from HTCSEMI, in a SSOP-28. Pinout and pin descriptions extracted fro  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | AVSS | power_in | Analog ground. |-| 2 | DRVDD | power_in | Digital driver supply, operating range 2.7 V to 3.6 V. |-| 3 | NC | unconnected | No connect. |-| 4 | NC | unconnected | No connect. |-| 5 | D0 | output | Digital output bit 0 (LSB), straight binary format. |-| 6 | D1 | output | Digital output bit 1. |-| 7 | D2 | output | Digital output bit 2. |-| 8 | D3 | output | Digital output bit 3. |-| 9 | D4 | output | Digital output bit 4. |-| 10 | D5 | output | Digital output bit 5. |-| 11 | D6 | output | Digital output bit 6. |-| 12 | D7 | output | Digital output bit 7 (MSB). |-| 13 | OTR | output | Out-of-range indicator, set high when the input overflows. |-| 14 | DRVSS | power_in | Digital ground. |-| 15 | CLK | input | Clock input, supports up to 50 MSPS conversion rate. |-| 16 | THREE-STATE | input | HI: high impedance state on outputs; LO: normal operation. |-| 17 | STBY | input | HI: power-down mode; LO: normal operation. |-| 18 | REFSENSE | input | Reference select; tied to AVDD it disables the internal reference. |-| 19 | CLAMP | input | HI: enable clamp mode; LO: no clamp. |-| 20 | CLAMPIN | input | Clamp reference input, allowable clamp voltage 0.5 V to 2.0 V. |-| 21 | REFTS | passive | Top reference; defines the maximum input voltage, REFTS max is AVDD. |-| 22 | REFTF | passive | Top reference decoupling; a decoupling capacitor network is always required. |-| 23 | MODE | input | Mode select. |-| 24 | REFBF | passive | Bottom reference decoupling; a decoupling capacitor network is always required. |-| 25 | REFBS | passive | Bottom reference; defines the minimum input voltage, REFBS min is GND. |-| 26 | VREF | power_in | Internal reference output, 1 V or 2 V; maximum reference drive current about 0.5 mA. |-| 27 | AIN | input | Analog input, between REFBS and REFTS. |-| 28 | AVDD | power_in | Analog supply, operating range 2.7 V to 3.6 V. |+| 1 | AVSS | power_in | Analog ground for the ADC; all digital signals are referenced to analog ground. |+| 2 | DRVDD | power_in | Digital driver supply, specified at 2.7 V to 3.6 V (3.3 V typical). |+| 3 | NC | unconnected | No connect pin. |+| 4 | NC | unconnected | No connect pin. |+| 5 | D0 | output | Output data bit 0 (LSB) of the straight-binary 8-bit output word. |+| 6 | D1 | output | Output data bit 1 of the straight-binary 8-bit output word. |+| 7 | D2 | output | Output data bit 2 of the straight-binary 8-bit output word. |+| 8 | D3 | output | Output data bit 3 of the straight-binary 8-bit output word. |+| 9 | D4 | output | Output data bit 4 of the straight-binary 8-bit output word. |+| 10 | D5 | output | Output data bit 5 of the straight-binary 8-bit output word. |+| 11 | D6 | output | Output data bit 6 of the straight-binary 8-bit output word. |+| 12 | D7 | output | Output data bit 7 (MSB) of the straight-binary 8-bit output word. |+| 13 | OTR | output | Out-of-range indicator, set high when the analog input overflows the input span. |+| 14 | DRVSS | power_in | Digital ground for the output drivers. |+| 15 | CLK | input | Sampling clock input, up to 50 MSPS; the ADC operates on both rising and falling edges of this clock. |+| 16 | THREE-STATE | input | Output three-state control: HI puts the data outputs in high-impedance state, LO selects normal operation. |+| 17 | STBY | input | Power-down control: HI enables power-down mode (tie to AVDD with clock held low), LO selects normal operation. |+| 18 | REFSENSE | input | Reference select: connecting this pin to VDD disables the internal reference so an external reference can be used. |+| 19 | CLAMP | input | Clamp mode enable: HI enables clamp mode (pulse applied for AC-coupled clamping), LO selects no clamp. |+| 20 | CLAMPIN | input | Clamp reference input; the allowable clamp voltage range is 0.5 V to 2.0 V. |+| 21 | REFTS | passive | Top reference input; sets the upper end of the input range, with the input span limited to 1 V to 2 V in top/bottom modes. |+| 22 | REFTF | passive | Top reference decoupling node, requiring the decoupling capacitor network shown in the datasheet. |+| 23 | MODE | input | Mode select pin, strapped to AVDD, AVSS or AVDD/2 to configure the input span and reference mode. |+| 24 | REFBF | passive | Bottom reference decoupling node, requiring the decoupling capacitor network shown in the datasheet. |+| 25 | REFBS | passive | Bottom reference; sets the lower end of the input range and must be grounded for single-ended 1 V p-p top/bottom operation. |+| 26 | VREF | power_in | Internal reference output, 1 V or 2 V selectable by strapping, also usable as the reference node for an external divider. |+| 27 | AIN | input | Analog signal input; with REFTS and REFBS it defines the input span, with a series resistor of 20 Ω or less recommended. |+| 28 | AVDD | power_in | Analog supply, specified at 2.7 V to 3.6 V (3.3 V typical). |  ## Key specifications @@ -52,25 +52,20 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Differential Nonlinearity | DNL | -0.5 | 0.2 | 0.5 | LSB | REFTS = 2.5V, REFBS = 0.5V | 2 |-| Integral Nonlinearity | INL | -0.5 | 0.3 | 0.5 | LSB |  | 2 |+| Differential Nonlinearity (DNL) | DNL | -0.5 | 0.2 | 0.5 | LSB | REFTS = 2.5V, REFBS = 0.5V (note *) | 2 |+| Integral Nonlinearity (INL) | INL | -0.5 | 0.3 | 0.5 | LSB |  | 2 | | Offset Error |  | -1.5 | 0.2 | 1.5 | % of FSR |  | 2 |-| Gain Error (Without Internal Reference) |  | -4 | 1.2 | 4 | % of FSR |  | 2 |-| Gain Error (With Internal Reference) |  | -5 | 1.2 | 5 | % of FSR |  | 2 |-| Output Voltage Tolerance (1V Mode) |  |  | 10 | 40 | mV |  | 2 |-| Operating Voltage AVDD | AVDD | 2.7 | 3.3 | 3.6 | V |  | 2 |-| Operating Voltage DRVDD | DRVDD | 2.7 | 3.3 | 3.6 | V |  | 2 |-| Analog Supply Current | IAVDD |  | 27.5 | 32 | mA | AVDD = 3V, MODE = AVSS | 2 |-| Power Consumption | PD |  | 82.7 | 96.5 | mW |  | 2 |-| Operating Range |  | -40 |  | 85 | ℃ |  | 2 |-| Conversion Rate | FS |  |  | 50 | MHz |  | 2 |-| High-Z Leakage |  | -12 |  | 12 | uA |  | 3 |-| Clock Pulse Width High |  | 14.7 |  |  | ns |  | 3 |-| Clock Pulse Width Low |  | 14.7 |  |  | ns |  | 3 |-| Maximum Output Update Rate | fCLOCK |  |  | 50 | MSPS |  | 3 |+| Gain Error (Without Internal Reference) |  | -4 | 1.2 | 4 | % of FSR | Without internal reference | 2 |+| Gain Error (With Internal Reference) |  | -5 | 1.2 | 5 | % of FSR | With internal reference | 2 |+| Operating Voltage, AVDD | AVDD | 2.7 | 3.3 | 3.6 | V |  | 2 |+| Operating Voltage, DRVDD | DRVDD | 2.7 | 3.3 | 3.6 | V |  | 2 |+| Operating Range (temperature) |  | -40 |  | 85 | ℃ |  | 2 |+| High-Z Leakage |  | -12 |  | 12 | uA | Digital output, high-impedance | 3 | | High Input Voltage |  | 2.4 |  |  | V |  | 3 | | Low Input Voltage |  |  |  | 0.3 | V |  | 3 |-| Data Valid Delay |  |  |  | 15 | ns | CL=15pF | 3 |+| Allowable clamp voltage range (CLAMPIN) |  | 0.5 |  | 2 | V | Clamp mode, CLAMPIN dc level | 12 |+| Series resistance at AIN |  |  |  | 20 | Ω | To maintain datasheet performance | 13 |+| Top/bottom reference points range |  | 1 |  | 2 | V | Top/bottom mode, REFTS and REFBS points; external divider voltage also 1 V to 2 V | 9 |  ## CAD (KiCad official) @@ -84,7 +79,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries Data extracted from the manufacturer datasheet, not a distributor listing:  - **Datasheet:** [HTCSEMI datasheet](docs/ht9280arsz-datasheet.pdf) (15 pp, sha256 `2c842fc0c1cff8da`, retrieved 2026-11-12, tier: lcsc)-- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).  [Datasheet PDF](docs/ht9280arsz-datasheet.pdf)
ht9280arsz-hero.overlay.json+703−698
@@ -1,700 +1,705 @@ {-  "spec": "adom-hero 1.4",-  "mpn": "HT9280ARSZ",-  "kind": "component + footprint reference art",-  "board_use": false,-  "plane_z_mm": -0.02,-  "units": "metre",-  "upAxis": "Z",-  "layers": {-    "pad_outlines": {-      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",-      "rgba": [-        0.0,-        0.902,-        0.863,-        0.5-      ],-      "pads": 28,-      "span_mm": 8.9,-      "dash_mm": 0.2225,-      "gap_mm": 0.1335,-      "pad_stroke_mm": 0.0534-    },-    "silkscreen": {-      "material": "Silkscreen reference lines - 30 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.3-      ],-      "footprint_items": 7,-      "pin1": {-        "source": "footprint silkscreen",-        "pad": "1"-      }-    },-    "signal_names": {-      "material": "Signal names - 50 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.5-      ],-      "font": "DejaVu Sans Mono",-      "labels": 28,-      "sides": "top + mirrored underside (single-sided)",-      "fallback_to_pad_number": 0-    }-  },-  "align": {-    "ok": true,-    "centre_offset_mm": 0.0,-    "tolerance_mm": 0.712,-    "orientation_flipped": false,-    "contacts_bbox_mm": [-      -3.9,-      3.9,-      -4.906,-      4.906-    ],-    "pads_bbox_mm": [-      -4.45,-      4.45,-      -4.425,-      4.425-    ],-    "seating_z_mm": 0.0-  },-  "sources": {-    "glb": "ht9280arsz-etched.glb",-    "glb_sha256": "abd9c07e4a196006440b91d267f0591924d8c3f7ade26901320f978ea9765e76",-    "footprint": "ht9280arsz.kicad_mod",-    "footprint_sha256": "bbb0d0449b996c0ad096ca837fee38110e319360b863de5c7df6a964f6140d98",-    "pins": "page.json component.pins",-    "pins_sha256": "6d312b8878894eb0ea67d27b635f1c2e99e7008318745684bc552e0ca1c8bdbd"-  },-  "generator": "adom-wiki 1.8.22 (component_hero)",-  "labels": [-    {-      "pad": "1",-      "text": "AVSS",-      "x": -4.55,-      "y": -4.225,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "2",-      "text": "DRVDD",-      "x": -4.55,-      "y": -3.575,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "3",-      "text": "NC",-      "x": -4.55,-      "y": -2.925,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "4",-      "text": "NC",-      "x": -4.55,-      "y": -2.275,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "5",-      "text": "D0",-      "x": -4.55,-      "y": -1.625,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "6",-      "text": "D1",-      "x": -4.55,-      "y": -0.975,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "7",-      "text": "D2",-      "x": -4.55,-      "y": -0.325,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "8",-      "text": "D3",-      "x": -4.55,-      "y": 0.325,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "9",-      "text": "D4",-      "x": -4.55,-      "y": 0.975,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "10",-      "text": "D5",-      "x": -4.55,-      "y": 1.625,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "11",-      "text": "D6",-      "x": -4.55,-      "y": 2.275,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "12",-      "text": "D7",-      "x": -4.55,-      "y": 2.925,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "13",-      "text": "OTR",-      "x": -4.55,-      "y": 3.575,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "14",-      "text": "DRVSS",-      "x": -4.55,-      "y": 4.225,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "15",-      "text": "CLK",-      "x": 4.55,-      "y": 4.225,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "16",-      "text": "THREE-STATE",-      "x": 4.55,-      "y": 3.575,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "17",-      "text": "STBY",-      "x": 4.55,-      "y": 2.925,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "18",-      "text": "REFSENSE",-      "x": 4.55,-      "y": 2.275,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "19",-      "text": "CLAMP",-      "x": 4.55,-      "y": 1.625,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "20",-      "text": "CLAMPIN",-      "x": 4.55,-      "y": 0.975,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "21",-      "text": "REFTS",-      "x": 4.55,-      "y": 0.325,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "22",-      "text": "REFTF",-      "x": 4.55,-      "y": -0.325,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "23",-      "text": "MODE",-      "x": 4.55,-      "y": -0.975,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "24",-      "text": "REFBF",-      "x": 4.55,-      "y": -1.625,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "25",-      "text": "REFBS",-      "x": 4.55,-      "y": -2.275,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "26",-      "text": "VREF",-      "x": 4.55,-      "y": -2.925,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "27",-      "text": "AIN",-      "x": 4.55,-      "y": -3.575,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "28",-      "text": "AVDD",-      "x": 4.55,-      "y": -4.225,-      "align": "left",-      "vertical": false,-      "h": 0.325-    }+ "spec": "adom-hero 1.4",+ "mpn": "HT9280ARSZ",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+  "pad_outlines": {+   "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+   "rgba": [+    0.0,+    0.902,+    0.863,+    0.5+   ],+   "pads": 28,+   "span_mm": 8.9,+   "dash_mm": 0.2225,+   "gap_mm": 0.1335,+   "pad_stroke_mm": 0.0534+  },+  "silkscreen": {+   "material": "Silkscreen reference lines - 30 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.3+   ],+   "footprint_items": 7,+   "pin1": {+    "source": "footprint silkscreen",+    "pad": "1"+   }+  },+  "signal_names": {+   "material": "Signal names - 50 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.5+   ],+   "font": "DejaVu Sans Mono",+   "labels": 28,+   "sides": "top + mirrored underside (single-sided)",+   "omitted": null,+   "fallback_to_pad_number": 0+  }+ },+ "align": {+  "ok": true,+  "board_underside": true,+  "electrical_pads_without_contact": [],+  "mounting_pads_left_out": [],+  "centre_offset_mm": 0.0,+  "over_pads": true,+  "tolerance_mm": 0.712,+  "orientation_flipped": false,+  "contacts_bbox_mm": [+   -3.9,+   3.9,+   -4.906,+   4.906   ],-  "pads": [-    {-      "number": "1",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        -4.225-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "2",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        -3.575-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "3",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        -2.925-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "4",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        -2.275-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "5",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        -1.625-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "6",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        -0.975-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "7",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        -0.325-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "8",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        0.325-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "9",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        0.975-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "10",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        1.625-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "11",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        2.275-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "12",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        2.925-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "13",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        3.575-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "14",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        4.225-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "15",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        4.225-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "16",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        3.575-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "17",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        2.925-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "18",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        2.275-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "19",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        1.625-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "20",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        0.975-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "21",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        0.325-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "22",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        -0.325-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "23",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        -0.975-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "24",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        -1.625-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "25",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        -2.275-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "26",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        -2.925-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "27",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        -3.575-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "28",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        -4.225-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    }-  ]-}+  "pads_bbox_mm": [+   -4.45,+   4.45,+   -4.425,+   4.425+  ],+  "seating_z_mm": 0.0+ },+ "sources": {+  "glb": "ht9280arsz-etched.glb",+  "glb_sha256": "abd9c07e4a196006440b91d267f0591924d8c3f7ade26901320f978ea9765e76",+  "footprint": "ht9280arsz.kicad_mod",+  "footprint_sha256": "bbb0d0449b996c0ad096ca837fee38110e319360b863de5c7df6a964f6140d98",+  "pins": "page.json component.pins",+  "pins_sha256": "6d312b8878894eb0ea67d27b635f1c2e99e7008318745684bc552e0ca1c8bdbd"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+  {+   "pad": "1",+   "text": "AVSS",+   "x": -4.55,+   "y": -4.225,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "2",+   "text": "DRVDD",+   "x": -4.55,+   "y": -3.575,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "3",+   "text": "NC",+   "x": -4.55,+   "y": -2.925,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "4",+   "text": "NC",+   "x": -4.55,+   "y": -2.275,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "5",+   "text": "D0",+   "x": -4.55,+   "y": -1.625,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "6",+   "text": "D1",+   "x": -4.55,+   "y": -0.975,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "7",+   "text": "D2",+   "x": -4.55,+   "y": -0.325,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "8",+   "text": "D3",+   "x": -4.55,+   "y": 0.325,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "9",+   "text": "D4",+   "x": -4.55,+   "y": 0.975,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "10",+   "text": "D5",+   "x": -4.55,+   "y": 1.625,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "11",+   "text": "D6",+   "x": -4.55,+   "y": 2.275,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "12",+   "text": "D7",+   "x": -4.55,+   "y": 2.925,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "13",+   "text": "OTR",+   "x": -4.55,+   "y": 3.575,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "14",+   "text": "DRVSS",+   "x": -4.55,+   "y": 4.225,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "15",+   "text": "CLK",+   "x": 4.55,+   "y": 4.225,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "16",+   "text": "THREE-STATE",+   "x": 4.55,+   "y": 3.575,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "17",+   "text": "STBY",+   "x": 4.55,+   "y": 2.925,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "18",+   "text": "REFSENSE",+   "x": 4.55,+   "y": 2.275,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "19",+   "text": "CLAMP",+   "x": 4.55,+   "y": 1.625,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "20",+   "text": "CLAMPIN",+   "x": 4.55,+   "y": 0.975,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "21",+   "text": "REFTS",+   "x": 4.55,+   "y": 0.325,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "22",+   "text": "REFTF",+   "x": 4.55,+   "y": -0.325,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "23",+   "text": "MODE",+   "x": 4.55,+   "y": -0.975,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "24",+   "text": "REFBF",+   "x": 4.55,+   "y": -1.625,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "25",+   "text": "REFBS",+   "x": 4.55,+   "y": -2.275,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "26",+   "text": "VREF",+   "x": 4.55,+   "y": -2.925,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "27",+   "text": "AIN",+   "x": 4.55,+   "y": -3.575,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "28",+   "text": "AVDD",+   "x": 4.55,+   "y": -4.225,+   "align": "left",+   "vertical": false,+   "h": 0.325+  }+ ],+ "pads": [+  {+   "number": "1",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    -4.225+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "2",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    -3.575+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "3",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    -2.925+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "4",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    -2.275+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "5",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    -1.625+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "6",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    -0.975+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "7",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    -0.325+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "8",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    0.325+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "9",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    0.975+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "10",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    1.625+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "11",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    2.275+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "12",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    2.925+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "13",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    3.575+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "14",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    4.225+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "15",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    4.225+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "16",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    3.575+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "17",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    2.925+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "18",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    2.275+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "19",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    1.625+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "20",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    0.975+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "21",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    0.325+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "22",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    -0.325+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "23",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    -0.975+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "24",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    -1.625+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "25",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    -2.275+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "26",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    -2.925+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "27",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    -3.575+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "28",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    -4.225+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  }+ ]+}\ No newline at end of file
package.json+35−35
@@ -1,6 +1,6 @@ {   "slug": "ht9280arsz",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "HTCSEMI Analog To Digital Converters (ADCs), SSOP-28. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -52,7 +52,7 @@       "lcsc": "C5336214"     },     "distributor_check": {-      "checked_at": "2026-11-12T04:55:49Z",+      "checked_at": "2026-11-12T07:57:05Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": null,@@ -68,169 +68,169 @@         "number": "1",         "name": "AVSS",         "type": "power_in",-        "description": "Analog ground."+        "description": "Analog ground for the ADC; all digital signals are referenced to analog ground."       },       {         "number": "2",         "name": "DRVDD",         "type": "power_in",-        "description": "Digital driver supply, operating range 2.7 V to 3.6 V."+        "description": "Digital driver supply, specified at 2.7 V to 3.6 V (3.3 V typical)."       },       {         "number": "3",         "name": "NC",         "type": "unconnected",-        "description": "No connect."+        "description": "No connect pin."       },       {         "number": "4",         "name": "NC",         "type": "unconnected",-        "description": "No connect."+        "description": "No connect pin."       },       {         "number": "5",         "name": "D0",         "type": "output",-        "description": "Digital output bit 0 (LSB), straight binary format."+        "description": "Output data bit 0 (LSB) of the straight-binary 8-bit output word."       },       {         "number": "6",         "name": "D1",         "type": "output",-        "description": "Digital output bit 1."+        "description": "Output data bit 1 of the straight-binary 8-bit output word."       },       {         "number": "7",         "name": "D2",         "type": "output",-        "description": "Digital output bit 2."+        "description": "Output data bit 2 of the straight-binary 8-bit output word."       },       {         "number": "8",         "name": "D3",         "type": "output",-        "description": "Digital output bit 3."+        "description": "Output data bit 3 of the straight-binary 8-bit output word."       },       {         "number": "9",         "name": "D4",         "type": "output",-        "description": "Digital output bit 4."+        "description": "Output data bit 4 of the straight-binary 8-bit output word."       },       {         "number": "10",         "name": "D5",         "type": "output",-        "description": "Digital output bit 5."+        "description": "Output data bit 5 of the straight-binary 8-bit output word."       },       {         "number": "11",         "name": "D6",         "type": "output",-        "description": "Digital output bit 6."+        "description": "Output data bit 6 of the straight-binary 8-bit output word."       },       {         "number": "12",         "name": "D7",         "type": "output",-        "description": "Digital output bit 7 (MSB)."+        "description": "Output data bit 7 (MSB) of the straight-binary 8-bit output word."       },       {         "number": "13",         "name": "OTR",         "type": "output",-        "description": "Out-of-range indicator, set high when the input overflows."+        "description": "Out-of-range indicator, set high when the analog input overflows the input span."       },       {         "number": "14",         "name": "DRVSS",         "type": "power_in",-        "description": "Digital ground."+        "description": "Digital ground for the output drivers."       },       {         "number": "15",         "name": "CLK",         "type": "input",-        "description": "Clock input, supports up to 50 MSPS conversion rate."+        "description": "Sampling clock input, up to 50 MSPS; the ADC operates on both rising and falling edges of this clock."       },       {         "number": "16",         "name": "THREE-STATE",         "type": "input",-        "description": "HI: high impedance state on outputs; LO: normal operation."+        "description": "Output three-state control: HI puts the data outputs in high-impedance state, LO selects normal operation."       },       {         "number": "17",         "name": "STBY",         "type": "input",-        "description": "HI: power-down mode; LO: normal operation."+        "description": "Power-down control: HI enables power-down mode (tie to AVDD with clock held low), LO selects normal operation."       },       {         "number": "18",         "name": "REFSENSE",         "type": "input",-        "description": "Reference select; tied to AVDD it disables the internal reference."+        "description": "Reference select: connecting this pin to VDD disables the internal reference so an external reference can be used."       },       {         "number": "19",         "name": "CLAMP",         "type": "input",-        "description": "HI: enable clamp mode; LO: no clamp."+        "description": "Clamp mode enable: HI enables clamp mode (pulse applied for AC-coupled clamping), LO selects no clamp."       },       {         "number": "20",         "name": "CLAMPIN",         "type": "input",-        "description": "Clamp reference input, allowable clamp voltage 0.5 V to 2.0 V."+        "description": "Clamp reference input; the allowable clamp voltage range is 0.5 V to 2.0 V."       },       {         "number": "21",         "name": "REFTS",         "type": "passive",-        "description": "Top reference; defines the maximum input voltage, REFTS max is AVDD."+        "description": "Top reference input; sets the upper end of the input range, with the input span limited to 1 V to 2 V in top/bottom modes."       },       {         "number": "22",         "name": "REFTF",         "type": "passive",-        "description": "Top reference decoupling; a decoupling capacitor network is always required."+        "description": "Top reference decoupling node, requiring the decoupling capacitor network shown in the datasheet."       },       {         "number": "23",         "name": "MODE",         "type": "input",-        "description": "Mode select."+        "description": "Mode select pin, strapped to AVDD, AVSS or AVDD/2 to configure the input span and reference mode."       },       {         "number": "24",         "name": "REFBF",         "type": "passive",-        "description": "Bottom reference decoupling; a decoupling capacitor network is always required."+        "description": "Bottom reference decoupling node, requiring the decoupling capacitor network shown in the datasheet."       },       {         "number": "25",         "name": "REFBS",         "type": "passive",-        "description": "Bottom reference; defines the minimum input voltage, REFBS min is GND."+        "description": "Bottom reference; sets the lower end of the input range and must be grounded for single-ended 1 V p-p top/bottom operation."       },       {         "number": "26",         "name": "VREF",         "type": "power_in",-        "description": "Internal reference output, 1 V or 2 V; maximum reference drive current about 0.5 mA."+        "description": "Internal reference output, 1 V or 2 V selectable by strapping, also usable as the reference node for an external divider."       },       {         "number": "27",         "name": "AIN",         "type": "input",-        "description": "Analog input, between REFBS and REFTS."+        "description": "Analog signal input; with REFTS and REFBS it defines the input span, with a series resistor of 20 Ω or less recommended."       },       {         "number": "28",         "name": "AVDD",         "type": "power_in",-        "description": "Analog supply, operating range 2.7 V to 3.6 V."+        "description": "Analog supply, specified at 2.7 V to 3.6 V (3.3 V typical)."       }     ],     "provenance": {@@ -238,18 +238,18 @@       "factory_chain": {         "factory": "2.0.0",         "extractor": "extract_pins 0.3",-        "primary_model": "claude-sonnet-5-5",+        "primary_model": "claude-haiku-5-5",         "primary_mode": "text",         "consensus_model": "claude-sonnet-5-5",         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The datasheet lists D1-D6 only as a range (pins 6-11, 'B1 – B6'). I assigned D1..D6 to pins 6..11 in; The datasheet doesn't state electrical types. I inferred them from the descriptions: reference pins ; The ordering guide lists only 'HT9280A' in a 28-lead SSOP. The MPN suffix 'RSZ' isn't explained, so ",+          "extractor flagged: The datasheet's ordering guide lists only 'HT9280A' (28-Lead SSOP, -40°C to +85°C). The 'RS' / 'Z' s; AVSS and DRVSS are described as analog and digital ground, typed as power_in per the GND convention;; Control pins are typed as input from their HI/LO function text; the datasheet does not give electric",           "1/28 pins cited to the wrong page (name found elsewhere): ['9:D4@p4']"         ],         "pages_sent": 15,-        "cost_usd": 0.1207,-        "at": "2026-11-12T04:55:26"+        "cost_usd": 0.0675,+        "at": "2026-11-12T07:56:30"       },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/b2bf38f3d86f48d8864287719e1d52ba.pdf",@@ -304,7 +304,7 @@         "zmin_mm": 0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "a003d489deaabd889a36bc5bc20e332401f1101b8a6726f72e7c0cbb7655d6ab",+        "sha256": "9d4ae692cfa85bcc145593a58b22fda80d120f203a6fb4b71a3b7504287b4b81",         "checked": "2026-11-12",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }
page.json+38−36
@@ -4,7 +4,7 @@   "slug": "ht9280arsz",   "title": "HT9280ARSZ",   "brief": "HTCSEMI Analog To Digital Converters (ADCs), SSOP-28. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.1.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -34,7 +34,7 @@       "lcsc": "C5336214"     },     "distributor_check": {-      "checked_at": "2026-11-12T04:55:49Z",+      "checked_at": "2026-11-12T07:57:05Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": null,@@ -50,169 +50,169 @@         "number": "1",         "name": "AVSS",         "type": "power_in",-        "description": "Analog ground."+        "description": "Analog ground for the ADC; all digital signals are referenced to analog ground."       },       {         "number": "2",         "name": "DRVDD",         "type": "power_in",-        "description": "Digital driver supply, operating range 2.7 V to 3.6 V."+        "description": "Digital driver supply, specified at 2.7 V to 3.6 V (3.3 V typical)."       },       {         "number": "3",         "name": "NC",         "type": "unconnected",-        "description": "No connect."+        "description": "No connect pin."       },       {         "number": "4",         "name": "NC",         "type": "unconnected",-        "description": "No connect."+        "description": "No connect pin."       },       {         "number": "5",         "name": "D0",         "type": "output",-        "description": "Digital output bit 0 (LSB), straight binary format."+        "description": "Output data bit 0 (LSB) of the straight-binary 8-bit output word."       },       {         "number": "6",         "name": "D1",         "type": "output",-        "description": "Digital output bit 1."+        "description": "Output data bit 1 of the straight-binary 8-bit output word."       },       {         "number": "7",         "name": "D2",         "type": "output",-        "description": "Digital output bit 2."+        "description": "Output data bit 2 of the straight-binary 8-bit output word."       },       {         "number": "8",         "name": "D3",         "type": "output",-        "description": "Digital output bit 3."+        "description": "Output data bit 3 of the straight-binary 8-bit output word."       },       {         "number": "9",         "name": "D4",         "type": "output",-        "description": "Digital output bit 4."+        "description": "Output data bit 4 of the straight-binary 8-bit output word."       },       {         "number": "10",         "name": "D5",         "type": "output",-        "description": "Digital output bit 5."+        "description": "Output data bit 5 of the straight-binary 8-bit output word."       },       {         "number": "11",         "name": "D6",         "type": "output",-        "description": "Digital output bit 6."+        "description": "Output data bit 6 of the straight-binary 8-bit output word."       },       {         "number": "12",         "name": "D7",         "type": "output",-        "description": "Digital output bit 7 (MSB)."+        "description": "Output data bit 7 (MSB) of the straight-binary 8-bit output word."       },       {         "number": "13",         "name": "OTR",         "type": "output",-        "description": "Out-of-range indicator, set high when the input overflows."+        "description": "Out-of-range indicator, set high when the analog input overflows the input span."       },       {         "number": "14",         "name": "DRVSS",         "type": "power_in",-        "description": "Digital ground."+        "description": "Digital ground for the output drivers."       },       {         "number": "15",         "name": "CLK",         "type": "input",-        "description": "Clock input, supports up to 50 MSPS conversion rate."+        "description": "Sampling clock input, up to 50 MSPS; the ADC operates on both rising and falling edges of this clock."       },       {         "number": "16",         "name": "THREE-STATE",         "type": "input",-        "description": "HI: high impedance state on outputs; LO: normal operation."+        "description": "Output three-state control: HI puts the data outputs in high-impedance state, LO selects normal operation."       },       {         "number": "17",         "name": "STBY",         "type": "input",-        "description": "HI: power-down mode; LO: normal operation."+        "description": "Power-down control: HI enables power-down mode (tie to AVDD with clock held low), LO selects normal operation."       },       {         "number": "18",         "name": "REFSENSE",         "type": "input",-        "description": "Reference select; tied to AVDD it disables the internal reference."+        "description": "Reference select: connecting this pin to VDD disables the internal reference so an external reference can be used."       },       {         "number": "19",         "name": "CLAMP",         "type": "input",-        "description": "HI: enable clamp mode; LO: no clamp."+        "description": "Clamp mode enable: HI enables clamp mode (pulse applied for AC-coupled clamping), LO selects no clamp."       },       {         "number": "20",         "name": "CLAMPIN",         "type": "input",-        "description": "Clamp reference input, allowable clamp voltage 0.5 V to 2.0 V."+        "description": "Clamp reference input; the allowable clamp voltage range is 0.5 V to 2.0 V."       },       {         "number": "21",         "name": "REFTS",         "type": "passive",-        "description": "Top reference; defines the maximum input voltage, REFTS max is AVDD."+        "description": "Top reference input; sets the upper end of the input range, with the input span limited to 1 V to 2 V in top/bottom modes."       },       {         "number": "22",         "name": "REFTF",         "type": "passive",-        "description": "Top reference decoupling; a decoupling capacitor network is always required."+        "description": "Top reference decoupling node, requiring the decoupling capacitor network shown in the datasheet."       },       {         "number": "23",         "name": "MODE",         "type": "input",-        "description": "Mode select."+        "description": "Mode select pin, strapped to AVDD, AVSS or AVDD/2 to configure the input span and reference mode."       },       {         "number": "24",         "name": "REFBF",         "type": "passive",-        "description": "Bottom reference decoupling; a decoupling capacitor network is always required."+        "description": "Bottom reference decoupling node, requiring the decoupling capacitor network shown in the datasheet."       },       {         "number": "25",         "name": "REFBS",         "type": "passive",-        "description": "Bottom reference; defines the minimum input voltage, REFBS min is GND."+        "description": "Bottom reference; sets the lower end of the input range and must be grounded for single-ended 1 V p-p top/bottom operation."       },       {         "number": "26",         "name": "VREF",         "type": "power_in",-        "description": "Internal reference output, 1 V or 2 V; maximum reference drive current about 0.5 mA."+        "description": "Internal reference output, 1 V or 2 V selectable by strapping, also usable as the reference node for an external divider."       },       {         "number": "27",         "name": "AIN",         "type": "input",-        "description": "Analog input, between REFBS and REFTS."+        "description": "Analog signal input; with REFTS and REFBS it defines the input span, with a series resistor of 20 Ω or less recommended."       },       {         "number": "28",         "name": "AVDD",         "type": "power_in",-        "description": "Analog supply, operating range 2.7 V to 3.6 V."+        "description": "Analog supply, specified at 2.7 V to 3.6 V (3.3 V typical)."       }     ],     "provenance": {@@ -220,18 +220,18 @@       "factory_chain": {         "factory": "2.0.0",         "extractor": "extract_pins 0.3",-        "primary_model": "claude-sonnet-5-5",+        "primary_model": "claude-haiku-5-5",         "primary_mode": "text",         "consensus_model": "claude-sonnet-5-5",         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The datasheet lists D1-D6 only as a range (pins 6-11, 'B1 – B6'). I assigned D1..D6 to pins 6..11 in; The datasheet doesn't state electrical types. I inferred them from the descriptions: reference pins ; The ordering guide lists only 'HT9280A' in a 28-lead SSOP. The MPN suffix 'RSZ' isn't explained, so ",+          "extractor flagged: The datasheet's ordering guide lists only 'HT9280A' (28-Lead SSOP, -40°C to +85°C). The 'RS' / 'Z' s; AVSS and DRVSS are described as analog and digital ground, typed as power_in per the GND convention;; Control pins are typed as input from their HI/LO function text; the datasheet does not give electric",           "1/28 pins cited to the wrong page (name found elsewhere): ['9:D4@p4']"         ],         "pages_sent": 15,-        "cost_usd": 0.1207,-        "at": "2026-11-12T04:55:26"+        "cost_usd": 0.0675,+        "at": "2026-11-12T07:56:30"       },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/b2bf38f3d86f48d8864287719e1d52ba.pdf",@@ -286,7 +286,7 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "a003d489deaabd889a36bc5bc20e332401f1101b8a6726f72e7c0cbb7655d6ab",+        "sha256": "9d4ae692cfa85bcc145593a58b22fda80d120f203a6fb4b71a3b7504287b4b81",         "checked": "2026-11-12",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }@@ -622,5 +622,7 @@   ],   "visibility": {     "public": true-  }+  },+  "description": "HTCSEMI Analog To Digital Converters (ADCs), SSOP-28. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file