component
HT9200BM
Public Made by Adomby adom
HGSEMI Audio Interface ICs, SOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Initial commit: component/ht9200bm
80ceac8
HT9200BM
HGSEMI · Audio Interface ICs · SOP-14
HT9200BM from HGSEMI, in a SOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CE | input | Active-low chip enable; CMOS input, circuit enabled when CE=VSS, disabled (standby) when CE=VDD. |
| 2 | X2 | output | Crystal oscillator output; connect to one terminal of 3.58 MHz crystal (oscillator feedback node). |
| 3 | X1 | input | Crystal oscillator input; connect to other terminal of 3.58 MHz crystal. |
| 4 | VSS | power_in | Negative supply, ground reference (0 V). |
| 5 | NC | unconnected | No internal connection; leave unconnected. |
| 6 | D0 | input | Parallel data bit 0 input (CMOS IN); internal pull-up active in serial mode, floating in parallel mode. |
| 7 | D1 | input | Parallel data bit 1 input (CMOS IN); internal pull-up active in serial mode, floating in parallel mode. |
| 8 | D2 | input | Parallel data bit 2 input (CMOS IN); internal pull-up active in serial mode, floating in parallel mode. |
| 9 | D3 | input | Parallel data bit 3 input (CMOS IN); internal pull-up active in serial mode, floating in parallel mode. |
| 10 | S/P | input | Serial/parallel mode select input (CMOS IN); high=parallel mode, low=serial mode (must be tied to GND for serial mode). |
| 11 | CLK | input | Serial-mode synchronous clock input (CMOS IN, 100-500 kHz); data latched on falling edge; internal pull-up active in parallel mode, floating in serial mode. |
| 12 | DATA | input | Serial-mode 5-bit data input (CMOS IN, D0-D4 order); internal pull-up active in parallel mode, floating in serial mode. |
| 13 | DTMF | output | DTMF signal output (CMOS OUT); DC level 0.45-0.75 VDD, AC level 0.12-0.18 Vrms (row, RL=5 kΩ), minimum load 5 kΩ. |
| 14 | VDD | power_in | Positive supply; operating voltage 2.5 V-5.5 V, quiescent current 240 µA typ / 2500 µA max at 2.5 V, standby current 1 µA max at 2.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | SOP-14 |
| Category | Interface |
| Pins | 14 |
CAD (KiCad official)
- Symbol:
HT9200BM - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOP-14 (KiCad packages3D, STEP)
- 3D model files:
ht9200bm-etched.step/ht9200bm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ht9200bm.step/ht9200bm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (12 pp, sha256
4e71d5976623231b, retrieved 2026-09-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-sonnet-4-6(text+vision), consensusclaude-opus-4-7(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HT9200BM
**HGSEMI** · Audio Interface ICs · SOP-14
HT9200BM from HGSEMI, in a SOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CE | input | Active-low chip enable; CMOS input, circuit enabled when CE=VSS, disabled (standby) when CE=VDD. |
| 2 | X2 | output | Crystal oscillator output; connect to one terminal of 3.58 MHz crystal (oscillator feedback node). |
| 3 | X1 | input | Crystal oscillator input; connect to other terminal of 3.58 MHz crystal. |
| 4 | VSS | power_in | Negative supply, ground reference (0 V). |
| 5 | NC | unconnected | No internal connection; leave unconnected. |
| 6 | D0 | input | Parallel data bit 0 input (CMOS IN); internal pull-up active in serial mode, floating in parallel mode. |
| 7 | D1 | input | Parallel data bit 1 input (CMOS IN); internal pull-up active in serial mode, floating in parallel mode. |
| 8 | D2 | input | Parallel data bit 2 input (CMOS IN); internal pull-up active in serial mode, floating in parallel mode. |
| 9 | D3 | input | Parallel data bit 3 input (CMOS IN); internal pull-up active in serial mode, floating in parallel mode. |
| 10 | S/P | input | Serial/parallel mode select input (CMOS IN); high=parallel mode, low=serial mode (must be tied to GND for serial mode). |
| 11 | CLK | input | Serial-mode synchronous clock input (CMOS IN, 100-500 kHz); data latched on falling edge; internal pull-up active in parallel mode, floating in serial mode. |
| 12 | DATA | input | Serial-mode 5-bit data input (CMOS IN, D0-D4 order); internal pull-up active in parallel mode, floating in serial mode. |
| 13 | DTMF | output | DTMF signal output (CMOS OUT); DC level 0.45-0.75 VDD, AC level 0.12-0.18 Vrms (row, RL=5 kΩ), minimum load 5 kΩ. |
| 14 | VDD | power_in | Positive supply; operating voltage 2.5 V-5.5 V, quiescent current 240 µA typ / 2500 µA max at 2.5 V, standby current 1 µA max at 2.5 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | SOP-14 |
| Category | Interface |
| Pins | 14 |
## CAD (KiCad official)
- Symbol: `HT9200BM`
- Footprint: `Package_SO:SOIC-14_3.9x8.7mm_P1.27mm`
- 3D model: SOP-14 (KiCad packages3D, STEP)
- 3D model files: `ht9200bm-etched.step` / `ht9200bm-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ht9200bm.step` / `ht9200bm.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HGSEMI datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603374066459947008) (12 pp, sha256 `4e71d5976623231b`, retrieved 2026-09-17, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-sonnet-4-6` (text+vision), consensus `claude-opus-4-7` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ht9200bm-datasheet.pdf)